Using D50 Intra Oral Camera 1) Turn Camera “On” 2) Make sure camera is set to “A” Aperture Priority 3) Make sure aperture is set to F32 (Upper Right Display). This is adjusted by turning the wheel found on the back of the camera just next to the display. 4) Make sure Autofocus on Lens and is set to “M” or Manual 5) Make sure Autofocus on Camera is set to “M” or Manual 6) Turn Flash “On” Make sure flash is set to TTL mode. If it is not then push the mode button until TTL appears in the window. 7) Set Lens to desire ratio (1:7 for Full Face- 1:3 Upper/Lower in occlusion 1:1.6-1.4 Quadrant) 8) Move CAMERA in and out until object in viewfinder appears to be focused 9) When object in viewfinder is in focus, depress shutter fully 10) Review image for focus/composition 12) Down Load Pictures to Computer using USB cord.