EDS Factory Sealed Tumbler Switches Catalog Pages May 2017

EDS Factory Sealed Tumbler Switches
Explosionproof, Dust-Ignitionproof
UNILETS™ for Use with Threaded Metal Conduit.
NEC/CEC:
Class I, Division 1 and 2, Groups B, C, D
Class II, Division 1 and 2, Groups E, F, G
Class III
NEMA 3, 7 BCD, 9EFG
Applications
• Designed to prevent arcing of enclosed switches in ignitable
atmospheres during connect and disconnect operation of
lighting and light power loads.
• For use in classified areas where ignitable vapors, gases or
highly combustible dusts are present.
• For installation in:
— Chemical plants
— Petrochemical plants
— Refineries
— Other process industries
Features
Rocker Arm Operated
Illustrated Features
Controls: NEC/CEC Explosionproof Control Stations and Switches
• Enclosures have external mounting lugs for ease of mounting.
• Smooth, rounded integral bushing in each hub protects
conductor insulation.
• Enclosures furnished with internal ground screw.
• 20 Amp and 30 Amp units available for use with 120-277 Vac.
• Factory sealed switches are designed to a UL Standard so
that any arcing devices are contained within an explosionproof
labyrinth switch (standard switch and sealing chamber on
select models). Tumbler switch devices are approved for
installation without additional external sealing fittings.
• 1/2” and 3/4” 1-gang units suitable for Class I, Group B, in
addition to Class I, Groups C and D; Class II, Groups E, F and
G; and Class III.
• 20 Amp 4-way and all 30 Amp models utilize a switch enclosed
in separate sealing chamber. Smooth double-face, accurately
ground surfaces on sealing chamber flange mate with cover
and body to provide positive flame-tight construction.
• Sealing chamber has prewired factory sealed pigtail leads to
switch.
• Corrosion resistant, strong stainless steel hex head cap screws
attach cover/body/sealing chamber assembly for approved
flame-tight construction.
• Threaded stainless steel operating handle provides positive
Corrosion resistant operation.
• Choice of front-operating or side rocker arm handle—each may
be locked in ON or OFF position.
Front Operated
Handles may be locked in ON or OFF position
Standard Materials
• Body and cover: malleable iron
• Sealing chamber (on select models): copperfree (4/10 of 1%
max.) aluminum
• Handle: nylon 6/6
• Optional nameplate mounting bracket: corrosion resistant
stainless steel
Separate sealing chamber and switch construction.
Used on 20 Amp 4-way and all 30 Amp models.
Standard Finishes
• Tumbler switches: triple-coat—(1) zinc electroplate, (2) chromate, and (3) epoxy powder coat
Explosionproof Labyrith Switch
Used on all 20 Amp models excluding 4-way.
 Indicates items which are suitable for Class I, Group B, as well as Class I, Groups C and D; Class II, Groups E, F, G; and Class III. See product selection pages
for suitable items.
Visit our website at www.emerson.com or contact us at (800) 621-1506.
© May 2017
69
EDS Factory Sealed Tumbler Switches
Explosionproof, Dust-Ignitionproof
UNILETS™ for Use with Threaded Metal Conduit.
NEC/CEC:
Class I, Division 1 and 2, Groups B, C, D
Class II, Division 1 and 2, Groups E, F, G
Class III
NEMA 3, 7 BCD, 9EFG
Options
• 1- or 2-gang copperfree (4/10 of 1% max.) aluminum bodies
and covers  available. Add suffix – A.
• NPBRKT nameplate mounting bracket to make circuit
description/identification easy.
— Pre-drilled holes in bottom of bracket allow direct mounting
to control stations with existing cover bolts.
— Pre-drilled holes in middle of bracket allow mounting of
customer’s circuit identification nameplate; epoxy glue may
also be used for mounting (phenolic nameplate not included).
— Bracket eliminates costly field installation of drilling and
tapping to accommodate circuit identification nameplate.
— Brackets fit side-by-side on 2-, 3- and 4-gang boxes and
3-devices.
Standard Materials
• Body and cover: malleable iron
NEC/CEC Certifications and Compliances
• UL Standards: UL 894, UL 1203
• UL Listed: E10523, E81751
• cUL Listed: E81751, E810523
Controls: NEC/CEC Explosionproof Control Stations and Switches
Ordering Information for “Custom” Units
• Devices, covers and bodies may be ordered separately so that
a different EDS chamber/switch assembly may be used in each
gang.
• Order components separately as follows:
(1) select mounting body catalog number,
(2) select cover catalog number with desired switch operation
(1-pole, 2-pole, 3-way or 4-way).
How to Order Hub Arrangements
• Simply send sketch indicating sizes and locations for brazed
hubs on body or bodies selected from catalog listings. Orient
sketch so that cover opening faces front and mounting lugs
face upward and downward (box wall opposite cover should be
referred to as the back of box).
Bodies and Hubs Available
• Tumbler switches may be ordered in single thru five gang deep
malleable iron blank bodies with brazed hubs as specified at
any location.
• Tumbler switches may be ordered with tandem malleable iron
boxes with additional brazed hubs as specified.
• Standard malleable iron single and 2-gang tumbler switches
may be ordered with additional brazed hubs as specified.
• Single and 2-gang tumbler switches may be ordered with
aluminum boxes with additional brazed hubs as specified.
Related Products
• For classified-location push button, pilot light and selector
switch control stations, see EFD/EFDB and EDS Control
Stations and Pilot Lights.
 Indicates items which are suitable for Class I, Group B, as well as Class I, Groups C and D; Class II, Groups E, F, G; and Class III. See product selection pages
for suitable items.
 Aluminum rocker arm cover is not available.
70
Visit our website at www.emerson.com or contact us at (800) 621-1506.
© May 2017
EDS Factory Sealed Tumbler Switches
Explosionproof, Dust-Ignitionproof
Malleable Iron Body and Cover. Furnished with Internal Ground Screw.
NEC/CEC:
Class I, Division 1, Groups B, C, D
Class I, Division 2, Groups B, C, D
Class II, Division 1 and 2, Groups E, F, G
Class III
NEMA 3, 7CD, 9EFG
Hub Size
(Inches)
Catalog Number 
Switch
Dead-End
Feed-Thru
1-Gang — Front Operated
20 Amp — 120-277 Vac 
Dead-End
1/2
1-Pole
EDS150-F1
EDSC150-F1
1/2
2-Pole
EDS150-F2
EDSC150-F2
1/2
3-Way
EDS150-F3W
EDSC150-F3W
1/2
4-Way
EDS150-F4W 
EDSC150-F4W 
3/4
1-Pole
EDS175-F1
EDSC175-F1
3/4
2-Pole
EDS175-F2
EDSC175-F2
3/4
3-Way
EDS175-F3W
EDSC175F3W
3/4
4-Way
EDS175-F4W 
EDSC175F4W 
1
1-Pole
EDS110-F1
EDSC110-F1
1
2-Pole
EDS110-F2
EDSC110-F2
1
3-Way
EDS110-F3W
EDSC110-F3W
1
4-Way
EDS110-F4W 
EDSC110-F4W 
3/4
1-Pole
EDS175-F13 
EDSC175-F13 
3/4
2-Pole
EDS175-F23 
EDSC175-F23 
3/4
3-Way
EDS175-F3W3 
EDSC175-F3W3 
1
1-Pole
EDS110-F13 
EDSC110-F13 
1
2-Pole
EDS110-F23 
EDSC110-F23 
1
3-Way
EDS110-F3W3 
EDSC110-F3W3 
1/2
1-Pole
EDS250-F1
EDSC250-F1
1/2
2-Pole
—
EDSC250-F2
1/2
3-Way
—
EDSC250-F3W
—
EDSC250-F4W 
30 Amp — 120-277 Vac 
Controls: NEC/CEC Explosionproof Control Stations and Switches
Feed-Thru
2-Gang — Front Operated
20 Amp — 120-277 Vac 
Dead-End
1/2
4-Way
3/4
1-Pole
3/4
2-Pole
3/4
3-Way
3/4
4-Way
1
1-Pole
EDS210-F1
EDSC210-F1
1
2-Pole
EDS210-F2
EDSC210-F2
1
3-Way
EDS210-F3W
EDSC210-F3W
1
4-Way
EDS210-F4W 
EDSC210-F4W 
EDS275-F1
—
EDS275-F3W
—
EDSC275-F1
EDSC275-F2
EDSC275-F3W
EDSC275-F4W 
Feed-Thru
 For aluminum backbox and cover, add suffix -A.
 20 Amp — 1 HP at 120 Vac and 2 HP at 240 Vac.
 30 Amp — 2 HP at 120 Vac or 240 Vac.
 Contains standard switch and sealing chamber.
 Shaded area indicates items suitable for Class I, Group B, as well as Class I, Groups C and D; Class II, Groups E, F, G; and Class III.
Visit our website at www.emerson.com or contact us at (800) 621-1506.
© May 2017
71
EDS Factory Sealed Tumbler Switches
Explosionproof, Dust-Ignitionproof
Malleable Iron Body and Cover. Furnished with Internal Ground Screw.
NEC/CEC:
Class I, Division 1, Groups B, C, D
Class I, Division 2, Groups B, C, D
Class II, Division 1 and 2, Groups E, F, G
Class III
NEMA 3, 7 BCD, 9EFG
Hub Size
(Inches)
Catalog Number 
Switch
Dead-End
Feed-Thru
1-Gang — Rocker Arm Operated
20 Amp — 120-277 Vac 
Dead-End
1/2
1-Pole
EDS150-R1
EDSC150-R1
1/2
2-Pole
EDS150-R2
EDSC150-R2
1/2
3-Way
EDS150-R3W
EDSC150-R3W
1/2
4-Way
EDS150-R4W 
EDSC150-R4W 
3/4
1-Pole
EDS175-R1
EDSC175-R1
3/4
2-Pole
EDS175-R2
EDSC175-R2
3/4
3-Way
EDS175-R3W
EDSC175-R3W
3/4
4-Way
EDS175-R4W 
EDSC175-R4W 
1
1-Pole
EDS110-R1
EDSC110-R1
1
2-Pole
EDS110-R2
EDSC110-R2
1
3-Way
EDS110-R3W
EDSC110-R3W
1
4-Way
EDS110-R4W 
EDSC110-R4W 
3/4
1-Pole
EDS175-R13 
EDSC175-R13 
3/4
2-Pole
EDS175-R23 
EDSC175-R23 
3/4
3-Way
EDS175-R3W3 
EDSC175-R3W3 
1
1-Pole
EDS110-R13 
EDSC110-R13 
1
2-Pole
EDS110-R23 
EDSC110-R23 
1
3-Way
EDS110-R3W3 
EDSC110-R3W3 
1/2
1-Pole
EDS250-R1
EDSC250-R1
1/2
2-Pole
—
EDSC250-R2
1/2
3-Way
—
EDSC250-R3W
1/2
4-Way
—
EDSC250-R4W 
3/4
1-Pole
3/4
2-Pole
3/4
3-Way
3/4
4-Way
1
1-Pole
EDS210-R1
EDSC210-R1
1
2-Pole
EDS210-R2
EDSC210-R2
1
3-Way
EDS210-R3W
EDSC210-R3W
1
4-Way
EDS210-R4W 
EDSC210-R4W 
Controls: NEC/CEC Explosionproof Control Stations and Switches
30 Amp — 120-277 Vac 
Feed-Thru
2-Gang — Rocker Arm Operated
20 Amp — 120-277 Vac 
Dead-End
EDS275-R1
—
EDS275-R3W
—
EDSC275-R1
EDSC275-R2
EDSC275-R3W
EDSC275-R4W 
Feed-Thru
 For aluminum backbox, add suffix -A.
 20 Amp — 1 HP at 120 Vac and 2 HP at 240 Vac.
 30 Amp — 2 HP at 120 Vac or 240 Vac.
 Contains standard switch and sealing chamber.
 Shaded area indicates items suitable for Class I, Group B, as well as Class I, Groups C and D; Class II, Groups E, F, G; and Class III.
72
Visit our website at www.emerson.com or contact us at (800) 621-1506.
© May 2017
EDS Factory Sealed Tumbler Switches
Explosionproof, Dust-Ignitionproof
Malleable Iron Body and Cover. Furnished with Internal Ground Screw.
NEC/CEC:
Class I, Division 1 and 2, Groups C, D
Class II, Division 1 and 2, Groups E, F, G
Class III
NEMA 3, 7CD, 9EFG
Factory Assembled Switch Assembly
Switch Type
Catalog Number
20 Amp, 120-277 Vac 
30 Amp, 120-277 Vac 
Malleable Iron
Aluminum
Malleable Iron
Aluminum
1-Pole
EDKF21-Q 
EDKF21-AQ 
EDKF31-Q 
EDKF31-AQ 
2-Pole
EDKF22-Q 
EDKF22-AQ 
EDKF32-Q 
EDKF32-AQ 
3-Way
EDKF23W-Q 
EDKF23W-AQ 
EDKF33W-Q 
EDKF33W-AQ 
4-Way
EDKF24W-Q 
EDKF24W-AQ 
—
1-Pole
EDK-R21-Q 
EDK-R31-Q 
2-Pole
EDK-R22-Q 
EDK-R32-Q 
3-Way
EDK-R23W-Q 
EDK-R33W-Q 
4-Way
EDK-R24W-Q 
—
1-Pole
LAB21
—
2-Pole
LAB22
—
3-Way
LAB23W
—
—
Front Cover
Rocker Cover/Chamber
Controls: NEC/CEC Explosionproof Control Stations and Switches
Factory Sealed Switch Only
Nameplate Mounting Bracket
Description
Bracket with blank silver/black nameplate for EFDB series
Catalog Number
NPBRKT-EFDB
To order bracket with control station, add suffix –NPBRKT to end of catalog number.
To order engraved nameplates, add desired markings after catalog number. Maximum
of 2 lines with 12 characters (including spaces) per line.
Note: Mount bracket between cover screws and cover. Do not mount bracket between ground joint flame path between
cover and backbox.
 20 Amp Switches 1 HP at 120 Vac and 2 HP at 240 Vac.
 30 Amp Switches 2 HP at 120 Vac or 240 Vac.
 Contains Factory Sealed Switch; no sealing chamber.
 With sealing chamber.
Visit our website at www.emerson.com or contact us at (800) 621-1506.
© May 2017
73
EFD Factory Sealed Tumbler Switches
Furnished with Internal Ground Screw.
NEC/CEC:
Class I, Division 1 and 2, Groups C, D
Class II, Division 1 and 2, Groups E, F, G
Class III
NEMA 7CD, 9EFG
Mounting Bodies
Type
Hub Size
(Inches)
Malleable Iron
Catalog Number
Aluminum
1-Gang
EFD150NLQ
EFD150ANLQ
3/4
EFD175NLQ
EFD175ANLQ
1
EFD110NLQ
EFD110ANLQ
1/2
Dead-End
Feed-Thru
1/2
EFDC150NLQ
EFDC150ANLQ
3/4
EFDC175NLQ
EFDC175ANLQ
1
EFDC110NLQ
EFDC110ANLQ
2-Gang
Dead-End
1/2
EFD250NLQ
EFD250ANLQ
3/4
EFD275NLQ
EFD275ANLQ
EFD210NLQ
EFD210ANLQ
1/2
EFDC250NLQ
EFDC250ANLQ
3/4
EFDC275NLQ
EFDC275ANLQ
1
EFDC210NLQ
EFDC210ANLQ
1
Controls: NEC/CEC Explosionproof Control Stations and Switches
Feed-Thru
Tandem 
Dead-End
1/2
EFDT50NLQ
—
3/4
EFDT75NLQ
—
EFDT10NLQ
—
1/2
EFDCT50NLQ
—
3/4
EFDCT75NLQ
—
1
EFDCT10NLQ
—
1
Feed-Thru
Blank Bodies for Brazed Hubs
Construct complete catalog numbers per EFD Cast Device Boxes Ordering Information on following
page. Hubs will be located in center of walls and evenly spaced unless otherwise specified. Where
spacings are critical, submit sketch showing exact spacing requirements.
1-Gang
EFD1NL
2-Gang
EFD2NL
3-Gang
EFD3NL
4-Gang
EFD4NL
5-Gang
EFD5NL
 For tandem bodies, external seals must be installed within 1.5 meters (5 feet) of each conduit entrance for Class I, Groups C and D.
74
Visit our website at www.emerson.com or contact us at (800) 621-1506.
© May 2017
EDS Factory Sealed Tumbler Switches
Blank Bodies for Brazed Threaded Hubs
Single, Two, Three, Four and Five Gang Boxes. Brazed Threaded Hubs for Rigid Conduit, 1/2” thru 1”; Brazed Union Hubs, 1/2” thru 1”.
NEC/CEC:
Class I, Division 1 and 2, Groups C, D
Class II, Division 1 and 2, Groups E, F, G
Class III
NEMA 7CD, 9EFG
Cast Device Box Ordering Information
Determine catalog number as follows:
Standard Hub Arrangement Diagrams
(1) Select EFD device box catalog number; Hub ”a” is always TOP of box
(2) Select ”Standard Hub Arrangement
2-, 3-, 4- and 5-Gang (Front View)
Diagram” number; and
(3) Select symbols that represent hub
sizes from ”Symbol Table.” (Use ”0”
where no hub is required, and separate
the various divisions of the complete
catalog number by dashes.)
Example
The blank body device box selected is
EFD3NL and the hub arrangement is
diagram #8. Hub ”a” is to be 3/4” brazed
threaded; hub ”b”, 1” brazed threaded;
hub ”c”, 3/4” brazed threaded; hub ”d”,
no hub is required; and hub ”e”, 1” brazed
union. The complete catalog number will be:
EFD–3NL–8–23203E
Controls: NEC/CEC Explosionproof Control Stations and Switches
If a ”Standard Hub Arrangement” is not
suitable for the application, or when hubs
are to be more accurately spaced, submit
sketch locating hubs (1) from centerlines
of walls and (2) from outside back of box
(or from mounting lug surface if lugs are
supplied).
All hubs will be located in centerlines of
walls and evenly spaced unless
otherwise specified.
Symbol Table
Hub Size
(Inches)
Brazed
Threaded Hub
Symbol
Brazed Union
Hub Symbol
Blank
0
0
1/2
1
1E
3/4
2
2E
1
3
3E
1-Gang (Front View)
Visit our website at www.emerson.com or contact us at (800) 621-1506.
© May 2017
75
EDS Factory Sealed Tumbler Switches
NE/CEC:
Class I, Division 1, Groups B, C, D
Class I, Division 2, Groups B, C, D
Class II, Division 1 and 2, Groups E, F, G
Class III
NEMA 3, 7 BCD, 9EFG
Dimensions in Millimeters (Inches)
Front Operated Tumbler Switches
Controls: NEC/CEC Explosionproof Control Stations and Switches
Front — 1-Gang
Side
Front — 2-Gang
Dimensions in Millimeters (Inches)
B
Hub Size
(Inches)
A
1/2 and 3/4
136.7 (5.38)
155.7 (6.13)
19.8 (0.78)
1
139.7 (5.50)
160.3 (6.31)
23.9 (0.94)
C
Rocker Arm Operated Tumbler Switches
Front — 1-Gang
Hub Size
(Inches)
Side
A
Front — 2-Gang
Dimensions in Millimeters (Inches)
B
C
1/2 and 3/4
136.7 (5.38)
155.7 (6.13)
19.8 (0.78)
1
139.7 (5.50)
160.3 (6.31)
23.9 (0.94)
 Indicates items which are suitable for Class I, Group B, as well as Class I, Groups C and D; Class II, Groups E, F, G; and Class III. See product selection pages
for suitable items.
76
Visit our website at www.emerson.com or contact us at (800) 621-1506.
© May 2017
EDS Factory Sealed Tumbler Switches
NEC/CEC:
Class I, Division 1, Groups B, C, D
Class I, Division 2, Groups B, C, D
Class II, Division 1 and 2, Groups E, F, G
Class III
NEMA 3, 7 BCD, 9EFG
Dimensions in Millimeters (Inches)
Tandem
Front — Feed-Thru
Controls: NEC/CEC Explosionproof Control Stations and Switches
Front - Dead-End
Side
NPBRKT Nameplate Mounting Bracket
Secure bracket under
cover screws of box.
Torque cover screws
to 35” - lbs.
 Indicates items which are suitable for Class I, Group B, as well as Class I, Groups C and D; Class II, Groups E, F, G; and Class III. See product selection pages
for suitable items.
Visit our website at www.emerson.com or contact us at (800) 621-1506.
© May 2017
77