SPLIT100 Operation Instruction Manual SPLIT100

SPLIT100 Operation Instruction Manual
Technical Description
The splitter has been designed for use in
100Volt line audio systems.
It is used to give two short circuit protected
speaker outputs from one amplifier output (ie
when circuit A is short circuited circuit B will still
work with minimal distortion).
The letters appearing in the following table are
embossed on to the plastic of the case, next to
the relevant terminal.
Connections
Terminal Function
A
C
G
E
H
F
=
=
=
=
=
=
Audio amplifier output 100V
Audio amplifier output 0V
Speaker circuit A 100V
Speaker circuit A 0V
Speaker circuit B 100V
Speaker circuit B 0V
© 2004. Errors and omissions excepted.
The manufacturer of this equipment operates a policy of
continuous improvement and reserves the right to alter product
specifications at its discretion and without prior notice.
Tel:0191 4174551
Fax:0191 4170634
e-mail:info@signet-ac.com
Website:www. signet-ac.com
Page 1 of 1
DocNo.DCP0001321 RnB 26.11.04 rev3
SPLIT100 Operation Instruction Manual
Technical Description
The splitter has been designed for use in
100Volt line audio systems.
It is used to give two short circuit protected
speaker outputs from one amplifier output (ie
when circuit A is short circuited circuit B will still
work with minimal distortion).
Connections
The letters appearing in the following table are
embossed on to the plastic of the case, next to
the relevant terminal.
Terminal Function
A
C
G
E
H
F
© 2004. Errors and omissions excepted.
The manufacturer of this equipment operates a policy of
continuous improvement and reserves the right to alter product
specifications at its discretion and without prior notice.
Page 1 of 1
=
=
=
=
=
=
Audio amplifier output 100V
Audio amplifier output 0V
Speaker circuit A 100V
Speaker circuit A 0V
Speaker circuit B 100V
Speaker circuit B 0V
Tel:0191 4174551
Fax:0191 4170634
e-mail:info@signet-ac.com
Website:www. signet-ac.com
DocNo.DCP0001321 RnB 26.11.04 rev3