Workrite Ciglio LED Under-Cabinet Parent Lights - Assembly Instructions
Assembly Instructions:
Ciglio Under-Cabinet Light
Daisy Chain Parent Models
Parts
A
Light Fixture
Qty: 1
#1500189 Rev B
B
Universal Mounting Kit
Qty: 2
C
Transformer, 48 W
Qty: 1
D
Power Adaptor Cable
Qty: 1
Parent Model
!
1
If installing parent unit of daisy chain, be sure to position parent unit so that it can be connected to
the additional unit with its supplied jumper cable.
Mount to Cabinet
Determine if light will be affixed to a metal or wood cabinet and follow the appropriate step below.
B
Mount to METAL Cabinets:
a
Place Magnetic Mounts (B) onto back of
Light Fixture (A).
b
Attach Light Fixture to metal under-cabinet.
Magnets will hold the fixture in place.
Place lamp
under cabinet
a
b
A
OR Mount to Wood Cabinets:
Note: You will need a #2 Phillips-head screwdriver to complete this step.
a
b
c
Determine where you want to mount
your light and draw a straight line on the
underside of the cabinet to indicate the
center along the length of the light.
Attach the Universal Mounts (B) along
your line with Screws provided by
inserting screw through magnet and then
screwing into marked location.
Attach Light Fixture (A) onto mounts.
Magnets will hold the fixture in place.
8"–15" depending on size
a
Draw line parallel to
edge of cabinet
Draw line
B
Under-cabinet
b
Attach Mounts
along drawn
line
1 of 2 c
Lift light
onto mounts
A
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Workrite Ciglio LED Under-Cabinet Parent Lights - Assembly Instructions
2
a
#1500189 Rev B
Attach Parent to Transformer
a
A
Insert Power Adaptor Cable (D) into either
end of the fixture or at either end of the
daisy chain system.
D
b
D
A
C
b
Connect Power Adaptor Cable (D) to
Transformer (C).
3
Plug Transformer into Wall Outlet
4
Test the Touch Strip Control
C
Use the Touch Strip to turn light on
or off and to adjust brightness. To
turn the light on or adjust brightness
simply touch the strip and slide your
finger to the desired brightness. To
turn off, touch the smallest dot.
Off DimmingOn
slide
5
Occupancy Sensor Models
Occupancy
Sensor
(select models)
96"
40˚
!
Note: Install fixture to ensure occupant
is within sensor range as illustrated.
Sensor turns light off after 15 minutes
of inactivity and instantly back on when
activity is detected.
i
2 of 2 full brightness
60˚
60˚
40˚
0˚
0˚
Occupancy sensor range
and field of view
Replacement parts
Universal Mounting Kit...................................CIG-MOUNT
Power Adapter..............................................CIG-CABLE-PWR
48 W Transformer..........................................TR-48242000-A-RF5.5
Workrite Ergonomics | 800.959.9675 www.workriteergo.com