P12M PROOFER/HOLDING CABINET

P12M
Technical data sheet for
P12M PROOFER/HOLDING CABINET
Full Size 12 Tray Electric / Manual Proofer/Holding Cabinet
STANDARD FEATURES
• Dual function Proofer and Holding Cabinet
• Designed for individual use or system installed with
Turbofan 32D Convection Ovens
• 12 full size sheet pan capacity
• 24 half size sheet pan capacity
•27/8”/ 74mm tray spacing
• Compact 287/8” / 735mm width
• 110-120V plug-in
• 20A NEMA 5-20P cordset fitted
• Full double skin construction
• Auto water fill system with optional integrated water filter kit
• Continuous door seal
• Side hinged door (standard LH hinge). Optional RH hinge
(field convertible)
• Off / Proof / Hold mode selection
• Low velocity circulation fan system
• Mechanical thermostat
• Humidity level control
• Dual halogen cabinet interior lamps
• Cabinet temperature display thermometer
• 4 dia. 3” / 76mm castors with 2 front castors dual wheel
and swivel lock, 2 rigid rear castors
• 100% recyclable packaging
P12M
Unit shall be a Moffat electrically heated Turbofan Proofer and Holding Cabinet
ETL Listed and NSF-4 listed. The proofer and holding cabinet shall have
double skin construction with stainless steel interior and exterior sides, front
and top. Door shall be side hinged and field reversible. Unit shall have capacity
for up to 24 half size sheet pans or 12 full size sheet pans. A single speed
fan shall gently and evenly circulate air around the cabinet. Cabinet shall be
controlled by a mechanical thermostat and humidity via a control of the water
tank. A thermometer shall indicate the cabinet temperature. Proofer and
holding cabinet shall be mounted on castors, with two rigid castors at rear and
two swivel castors dual swivel and wheel lock and front. Proofer and Holding
cabinet shall operate independently or in combination with Moffat Turbofan
model E32D5 or G32D5 Convection Ovens. Proofer and Holding Cabinets shall
be fitted with NEMA 5-20P cordsets. Unit shall be supplied in 100% recyclable
shipping packaging.
ACCESSORIES
• Optional 3M Cuno water filter kit complete with cartridge
and connection fittings
• Installs in pre-fitted rear housing of cabinet for flush
rear installation
P12M
P12M Full Size Manual / Electric
Proofer/Holding Cabinet
CONSTRUCTION
304 stainless steel interior cabinet
Stainless steel front, sides and top exterior
Stainless steel interior side racks
Stainless steel frame side hinged door
0.2” / 5mm thick door glass
Stainless steel control panel
Aluminized coated steel base and rear panels
CONTROLS
Off / Proof / Holding mode selector switch.
Mechanical thermostat 65-185°F / 20-85°C
Air heating ON control panel indicator
Humidity level control
Humidity tank ON control panel indicator
Cabinet temperature thermometer
Auto-fill water system standard
CLEANING
Stainless steel top and side exterior panels
Stainless steel interior chamber
Easy access to all interior surfaces
Fully removable stainless steel rack support
Removable humidity water tank (no tools)
SPECIFICATIONS
Electrical Requirements
110-120V, 50/60Hz, 1-phase, 1.95kW, 15.6A
NEMA 5-20P cordset fitted
Water Requirements (optional)
Cold water connection ¾” GHT male
80psi maximum inlet pressure / 20psi minimum inlet pressure
External Dimensions
Width 287/8” / 735mm
Height 44½” / 1129mm including dia. 3” / 76mm castors
Depth317/8” / 810mm
Proofer Internal Dimensions
Width
18¼”/ 465mm
Height
37¼” / 945mm
Depth
27½” / 700mm
Volume 11ft³ / 0.31m3
Nett Weight (P12M)
194 lbs / 88kg
Packing Data (P12M)
236lbs / 107kg
32.1 ft³ / 0.91m3
Width 30” / 760mm
Height
51” / 1295mm
Depth363/8” / 925mm
www.moffatusa.com
www.turbofanoven.com
U.S.A.
Moffat Inc
3765 Champion Boulevard
Winston-Salem
North Carolina 27105
Ph Toll Free 1-800-551 8795
Ph 336-661 0257
Fax 336-661 9546
Email sales@moffat.com
www.moffatusa.com
INSTALLATION CLEARANCES
Rear
0“ / 0mm
LH Side
0“ / 0mm
RH Side
1” / 25mm
CLEARANCE FROM SOURCES OF HEAT
A minimum distance of 12” / 300mm from the appliance sides
is required
Manufactured by:
Moffat Limited
45 Illinois Drive, Izone Business Hub
Rolleston 7675, New Zealand
ISO9001
Quality
Management
Standard
Designed and manufactured by
ISO9001
All Turbofan products are designed and
manufactured by Moffat using the
internationally recognised ISO9001
quality management system, covering
design, manufacture and final inspection,
ensuring consistent high quality at all times.
In line with policy to continually develop
and improve its products, Moffat Limited
reserves the right to change specifications
and design without notice.
© Copyright Moffat Ltd
US.TFN.S.1601