vc-m high accuracy type displacement vibration converter

VC-M HIGH ACCURACY TYPE DISPLACEMENT
VIBRATION CONVERTER
VC Series
SPECIFICATIONS
Page 1 of 3
Model Code / Additional Spec. Code(
• Converter
VCMeasured range
010
020
040
060
080
100
150
250
0 to 1,000μm
0 to 2,000μm
0 to 4,000μm
0 to 6,000μm
0 to 8,000μm
0 to 10,000μm
0 to 15,000μm
0 to 25,000μm
M-
Output voltage
0
1
2
3
0 to 5VDC(5mA max.)
0 to 5VDC(30mA max.)
4 to 20mADC
1 to 5VDC
0 to 10VDC depending
on measured range
4
No entry if additional
spec. code is not specified.
)
/SLC
Power supply
0
1
100VAC
115VAC
System
cable length
1
3m
2
5m
Silicon
• Junction connector
VZ-1A
when Model VS-250 sensor is used, no junction connector
is required.
• Sensor
VS-
L-
Measured range
*1
010
020
040
060
080
100
150
250
0 to 1,000μm
0 to 2,000μm
0 to 4,000μm
0 to 6,000μm
0 to 8,000μm
0 to 10,000μm
0 to 15,000μm
0 to 25,000μm
/WPF
Sensor
cable
1 0.5m
2 1.0m
Directly
connected type
VS-
Water-proof
C-
Sensor
cable
1
0.5m
2
1.0m
3
Without
Measured range
Note) *1 BNC(male) connector is used for VS-250L
sensor only.
UM(female) connectors are used for others.
*2 BNC(female) connector is used for VS-250C
sensor only, and sensor cable is not
necessary.
UM(female) connectors are used for others.
*2
040
060
080
100
150
250
Connector type
0 to 4,000μm
0 to 6,000μm
0 to 8,000μm
0 to 10,000μm
0 to 15,000μm
0 to 25,000μm
• Extension cable
VS-
H-
Measured range
010
020
040
0 to 1,000μm
0 to 2,000μm
0 to 4,000μm
Sensor
cable
1
0.5m
2
1.0m
VW-100D-
For VS except 25,000μm
Cable length
1
2
3
4
200°C type
2.5m
4.5m
2.0m
4.0m
VW-100E-
Only for 25,000μm
directly connected type
PTFE
Cable length
1
2
3
4
2.5m
4.5m
2.0m
4.0m
VW-100F-
BNC(female) BNC(male)
Only for 25,000μm
connector type
Cable length
1
2
3.0m
5.0m
PTFE
BNC(male)
BNC(male)
Interchangeability
There is a possibility of performance degradation when any part of the combination of the
sensor, the extension cable, the converter or the target is changed from what is specified in
the test report. For more information, please refer to the instruction manual.
39619E2.0
Issued
Apr.1997
Revised Sep.2014
VC Series
SPECIFICATIONS
VC-M HIGH ACCURACY TYPE DISPLACEMENT
VIBRATION CONVERTER
Page 2 of 3
SENSOR DIMENSIONS BY MODEL NUMBER
Sensor tip (mm)
Sensor thread (mm)
Sensor
Model No.
Measured
range
Length L1
DiameterøD
VS-010L-
VS-010H-
0 to 1,000μm
6
6.3
20
8
1.0
VS-020L-
VS-020H-
0 to 2,000μm
6
6.3
20
8
1.0
VS-040L-
VS-040C-
VS-040H-
0 to 4,000μm
13
14.8
20
18
1.0
VS-060L-
VS-060C-
0 to 6,000μm
23
22
19
18
1.0
VS-080L-
VS-080C-
0 to 8,000μm
29
28
19
18
1.0
VS-100L-
VS-100C-
0 to 10,000μm
36
34
28
20
1.0
VS-150L-
VS-150C-
0 to 15,000μm
51
49
28
24
1.0
VS-250L-
VS-250C-
0 to 25,000μm
77.5
70
35
30
1.0
Length L2 Normal size
Pitch
• Sensor outline(sensor directly connected with sensor cable)
Jam nut
Sensor tip
Sensor thread
Sensor cable
Miniature connector *1
øD
L1
L2
0.5m or 1.0m
• Sensor outline (sensor with connector)
Note) *1 BNC connector is used for VS-250 only.
Jam nut
Sensor tip
Sensor thread
Miniature connector *1
Sensor cable
Miniature connector *1
øD
Miniature connector *1
L1
L2
39619E2.0
Issued
Apr.1997
Revised Sep.2014
VC Series
SPECIFICATIONS
VC-M HIGH ACCURACY TYPE DISPLACEMENT
VIBRATION CONVERTER
Page 3 of 3
SPECIFICATIONS
0 to 1,000μm, 0 to 2,000μm, 0 to 4,000μm, 0 to 6,000μm,0 to 8,000μm,0 to 10,000μm,
Measured range
0 to 15,000μm, 0 to 25,000μm
Target material
Conductor
Calibration
Calibrated using a specified target.(supply the target if it has a special material and shape.)
Linearity
Within ±0.5% of F.S. at 25°C
Frequency response
DC to 1kHz(-3dB)
SN ratio
54dB (within 10mVpk-pk)
Output signal
0 to 5VDC, max. 5mA (when booster is provided, 30mA Max.)
Zero shift
Max. -50% of F.S.
Power supply changeability
±10% changeability : Within ±0.5% of F.S.
Operating
temperature range
Converter
:
0 to 40°C (32 to 104°F REF.)
Extension cable
:
0 to 60°C (32 to 140°F REF.)
Sensor
:
-10 to +130°C (14 to 266°F REF.)
Connector
:
-10 to +200°C (14 to 392°F REF.)
(For Model VS -
H)
Max.85°C (185°F)
Power supply
100VAC±10% 50/60Hz
Max. power consumption
5VA
Color(converter)
Black
Accessories(option)
Output signal cable
2m (with a one-sided BNC connector)
1 piece
Power cable
3m (with AC plug)
1 piece
2 pieces(mounting screw M4 length : 8mm
4 pieces)
Mounting bracket (L=shaped)
CONFIGURATION
• Sensor directly connected with sensor cable
Sensor cable
(teflon coaxial cable)
Sensor
Extension cable
(coaxial cable : 3C-FB)
Converter
Junction connector *1
Output signal cable
Power cable
0.5m or 1.0m
2m,2.5m,4m or 4.5m
(when Model VS-250L
sensor is used, coaxial cable : PTFE)
Note) *1 When Model VS-250L sensor is used, no junction connector is required.
• Sensor with connector
Sensor cable *2
(teflon coaxial cable)
Sensor
Extension cable
(coaxial cable : 3C-FB)
Junction connector *2
0.5m or 1.0m
Converter
Output signal cable
Power cable
2m,2.5m,4m or 4.5m
(when Model VS-250C
sensor is used, 3m or 5m coaxial cable : PTFE)
Note) *2 When Model VS-250C sensor is used, no sensor cable and no junction connector are required.
39619E2.0
Issued
Apr.1997
Revised Sep.2014
Download PDF
Similar pages