GE Fanuc
Intelligent Platforms
CC11
High Performance – 3U Compact PCI® Dual Slot Dual Core Processor Board
Features
• Intel® Core 2 Duo® processor, 1.5 GHz
Intel® Core Duo® processor 1.2, 1.66 and 2 GHz
Intel® Celeron® M processor, 1.06 GHz
• Up to 4 MB L2 cache
• Ultra compact all-in-one PC
• System or Non-system (peripheral mode)
• System slot for 32-bit CompactPCI backplane
• Up to 2 GB DDR2 SDRAM
• Flash drive or local hard disk
• VGA interface/SDVO interface
• Up to four Gigabit Ethernet ports
• Enhanced IDE UDMA-100
• 3x Serial ATA
• 2x serial I/O with FIFOs, RS-232 interface
• 6x USB 2.0
• Optional audio interface
• Watchdog, temperature sensor
• 5 V / 3.3 V supply
• Optional –40° C to +75° C
• RoHS compliant
CC11 is a high-performance 3U CompactPCI®
CPU board using the Intel® Celeron® M, the Intel®
Core Duo or the Intel® Core 2 Duo® Processor
incorporating sophisticated power management
technology, eliminating the need for an onboard
fan. The CC11 can be ordered as a system or nonsystem slot single board computer.
The CC11 is a powerful processor platform for a
wide range of applications and markets such as
multimedia, automation, transportation, as well as
imaging, medical, robotics, and many others. The
CC11 is very suited to low-power embedded
computer applications in a small form factor
where optimal performance and functionality is
required.
CompactFlash is available as an option.
The CC11 is RoHS compliant.
It contains an integrated SATA or EIDE hard disk or
CompactFlash. It offers the user the choice
between a DVI interface or a COM2 port on the
front. In place of the dual Ethernet ports an audio
interface can be available based on an order
option.
The CC11 supports up to four Gigabit Ethernets, up
to 2 GByte of DDR2 SDRAM and VGA/SDVO. At the
heart of the CC11 design is a high-bandwidth
667MHz bus connecting the processor, chipset
and PC2-5300 DDR2 SDRAM. In addition there are
six USB 2.0 ports, two serial channels, and three
serial ATA channels. Interfaces are available as
front- and/or rear-I/O. The CC11 is available in
standard temperature range 0° C to +70° C, and
optional in extended from -40° C to +75° C.
Custom specific versions are available on request.
For a single slot 3U CompactPCI SBC, refer to the
CL11 dual core processor board.
CC11 High Performance 3U CompactPCI® Dual Slot Dual Core Processor Board
Specifications
Processor - µFCBGA, Low Power Design
• Scaleable processing power with flexible processor
design
• Intel Celeron M processor ULV 423: 1.06 GHz
• Intel Core Duo processor U2500: 1.20 GHz
• Intel Core Duo processor L2400: 1.66 GHz
• Intel Core Duo processor T2500: 2.00 GHz
• Intel Core 2 Duo processor L7400: 1.5 GHz
• High efficiency on-board switching regulator (DC/DC)
• Fanless cooling with heat sink
* Contact factory for latest CPU versions
Cache
Celeron 423
Core Duo
Core 2 Duo
level 1
level 2e
32 Kbyte
32 Kbyte
32 Kbyte
1 Mbyte, full speed
2 Mbyte, full speed
4 Mbyte, full speed
Chipset – Intel 945GM with Intel ICH7R
• 533/667 MHz system bus to processor
• One PCI Express x4 or four PCI Express x1 interfaces
• Two PCI Express x1 interfaces
• Data throughput between 945GM and ICH7R is
theoretically 2 Gbyte/s (1 Gbyte/s each direction)
Memory – DDR2 667
• Single-/dual-channel DDR2 SDRAM
• High-speed 667 MHz (PC2 5300) DDR2 SDRAM
• 64-bits wide/128-bits wide
• 512 Mbyte to 2 Gbyte with soldered chips
CompactPCI
• PICMG 2.0 R3.0 compliant CPCI 32 bit/66 MHz
local bus standard
• Backplane with rear I/O
• System or non-system (peripheral) PCI Bridge
Pericom PI7C9X110 for up to 7 slots
• J1+2, 2 mm pin and socket connectors
(IEC-1076-4-101)
Gigabit – Realtek RTL8111B
• Highly integrated Single Gigabit Ethernet Controller
with PCI Express x1 interface
• 64 Kbyte Transmit and Receive FIFO
• 10/100/1000BaseT auto-negotiation
• Port 1 and Port 2 for front or rear I/O. Solder option.
• Port 3 and Port 4 for front I/O. Depends on
product version
Hard Disk or Flash Drive
• EIDE and SATA interfaces on header connector
• One 2.5” SATA/EIDE hard disk or one Compact Flash
connector (for extended temperature range and
higher shock/vibration immunity)
VGA and LCD - Chipset Integrated
• 2D & 3D graphics engine
• DirectX 9.1 support
• Up to 64 Mbyte of dynamic video memory allocation
• Integrated 360 MHz 24-bit RAMDAC for analog VGA
monitors up to 1600 x 1200, 75 Hz
• Display image rotation
• Graphics power management
• VGA at front or rear I/O
• SDVO at connector, with extension card DVI-D
support possible
EIDE
• Ultra ATA/100 sync. DMA mode up to 90 Mbyte/s
• PIO mode 4 and bus master IDE up to 16 Mbyte/s
• Onboard devices supported via local header
SATA
• Two serial ATA at rear I/O
• One SATA interface on header connector
• DMA mode up to 150 Mbyte/s
Serial I/O - RS232
• Integrated in SMSC SCH3112 Super I/O
• Two asynchronous 16550 compatible full duplex
serial channels
• High-speed transfer up to 115.2 kbaud with
16 byte FIFOs
• COM1 available at rear I/O
• COM2 optional available at front (8 HP)
• COM2 interface supports RS232, opto RS232/485
Audio Interface - optional
• S/PDIF digital output (optical)
• Line in
• Headphone out
General Purpose Input/Outputs
• Integrated in SMSC SCH3112 Super I/O
• 8 bits programmable general purpose inputs/outputs
USB 2.0
• Six USB 2.0 connectors. Three on front, three on
rear I/O.
Keyboard
• Via USB (supports legacy keyboard/mouse SW)
Mouse
• Via USB (supports legacy keyboard/mouse SW)
Real-time Clock
• Integrated in chipset
• RTC 146818 compatible, on-board Li-battery
CMOS RAM
• 114 bytes non-volatile CMOS RAM for BIOS data
EEPROM
• 512 Kbit (64 Kbyte) serial EEPROM for non-volatile
user data
Floppy
• Via USB port
Watchdog
• Integrated in chipset
• Two-stage watchdog with independent count values
• First stage drives NMI or SMI, second stage
drives reset
• Configurable granularity from 1 μs to 10 min
Timer
• Integrated in chipset based on 82C59
• Includes three timer comparators
• One-shot and periodic interrupts supported
Temperature Sensor
• CPU die and heat sink temperature software readable
from –65 °C to +127 °C
LED
• Two LEDs at front panel
CC11 High Performance 3U CompactPCI® Dual Slot Dual Core Processor Board
BIOS Features
• New AMI BIOS Core 8, in-system programmable
Flash ROM
• Automatic system configuration
• Integrated VGA, SATA RAID and Ethernet PXE ROM
• USB mass storage support
• Password protection
• Headless support
• Remote console through serial port
Software
• The following software is supported to the extent
listed below.
OS
WIN XP
QNX 6
VxWorks
Lynx OS
Linux√
On Request
-
√
-
√
-
Available
√
√
√
Front and Rear I/O with Standard Front Panel
Function
Single Board Computer CC11
Front
I/O
Onboard
I/O
Rear
I/O
Gb Ethernet 0
RJ-45 *1
Yes *1
Gb Ethernet 1
RJ-45 *1
Yes*1
USB 0
USB
USB 1
USB
USB 2 to 4
Yes
VGA
D-15
Yes
EIDE
Misc. Header
SATA 1 / 2
Yes COM 1
Yes
GPIO (8 pins)
Yes
Power button
Button
Reset
Yes
Speaker
Yes LED
Yes
Keyboard,
Via USB
Via USB
Mouse, Floppy
USB 5
USB
SDVO
DVI-D *2
EIDE HDD or CFlash
Connector SATA 3
HDD Connector
COM 2
D-15
Gb Ethernet 2 RJ-45
Gb Ethernet 3 RJ-45
Audio I/F *3
Line Out
Line In
S/PDIF
Out
Speaker
Yes
*1 Front- or Rear-IO as a solder option
*2 Possible with special extension card, COM2 front
I/O not available
*3 Only available for operating temperature ≥ 0 °C
Power Requirements
• +5 V, +3.3 V Required
Power Consumption-typical operating current (est)
• TBD
Mechanical – PICMG 2.0
• 3U, 2 slot wide (100 x 160 x 40.64) mm with
8HP Front panel
• CC11 in backplanes with right justified system slot
occupies one CPCI slot only.
Temperature
• Note: For detailed information about the operating
temperature behavior of the board it is absolutely
necessary to consult the manual. The highest achievable operating temperature depends on processor
type, speed, ambient conditions (air flow) and front
plate width.
• All values under typical conditions.
Standard
Extended
Operating Storage
0 °C to +55 °C
–40 °C to +75 °C
–40 °C to +85 °C
–40 °C to +85 °C
Humidity
• Operating: 5% – 95% @ 40 °C
• Storage: 5% – 95% @ 40 °C
Altitude
• Operating: 15.000 ft. (4.5 km)
• Storage: 40.000 ft. (12 km)
Shock (3 axis, up & down, 5 hits/direction)
• Styles 1, 3: 12 g / 6 ms
Vibration (60 minutes each axis)
• Styles 1, 3: 2 g rms @ 5 to 100 Hz
VITA 47
• Designed to meet VITA47 class EAC1 and EAC3
MTBF
• Calculations are available in accordance with
MIL-HDBK-217.
Please contact GE Fanuc Intelligent Platforms.
Safety
• Designed to meet standard UL1590, CE class A, FCC-A
CC11 High Performance 3U CompactPCI® Dual Slot Dual Core Processor Board
Block Diagram
Intel
Core 2 Duo
Processor
VGA
DVI-D
Intel
945GM
VGA/LCD
2 Gbyte DDR 2
SDRAM
2 Gbyte/s
PCI-E
(x1)
GbE Controller
1x GbE
3x SATA
PCI-E
(x1)
GbE Controller
1x GbE
6x USB
PCI-E
(x1)
1x EIDE
Intel
ICH7R
CPCI Bridge
Codec
Watchdog
Timer
RTC
SMB
LPC
Audio
2x COM
Super I/O
8x GPI/O
PCI-E
(x1)
GbE Controller
1x GbE
PCI-E
(x1)
GbE Controller
1x GbE
Ordering Information
Hardware Accessories
CTM18: I/O transition module for 3U backplane
SCC484TB05CC11R: Starter cage 19” 4U, 5 slots, with fans, power supply, CDROM and hard disk, 0° C to +40° C
Operating Systems
Extensive operating systems support is available (see page 3). Chassis with power supplies, backplanes and drives on
request. For detailed information and further options, contact GE Fanuc Intelligent Platforms.
About GE Fanuc Intelligent Platforms
GE Fanuc Intelligent Platforms is a leading global provider of embedded computing solutions for a wide
range of industries and applications. Our comprehensive product offering includes many types of I/O,
single board computers, high performance signal processors, fully integrated, rugged systems including
flat panel displays, plus high speed networking and communications products. The company is headquartered in the U.S. and has design, manufacturing and support offices throughout the world. Whether
you’re looking for one of our standard products or a fully custom solution, GE Fanuc Intelligent Platforms
has the breadth, experience and 24/7 support to deliver what you need. For more information, visit
www.gefanuc.com.
GE Fanuc Intelligent Platformss
Information Centers
Americas:
1 800 322 3616 or 1 256 880 0444
Asia Pacific:
+81 3 5544 3973
Additional Resources
For more information, please visit the GE Fanuc
Intelligent Platforms web site at:
www.gefanuc.com
EMEA:
Germany: +49 821 5034-0
UK: + 44 1327 359444
©2007 GE Fanuc Intelligent Platforms. All rights reserved.
All other brands or names are property of their respective holders.
Specifications are subject to change without notice.
10.07 GFA-996