Improved Interface with Data Processor and Software

Digital Imaging & Vision Processing
The use of a Nikon microscope digital camera and E-Max software
will streamline your workflow from observation and capture, to the
storage of high-definition digital images of your workpieces.
MM Controller Backpack Interface
Illumination, X/Y stage and Z data can be
connected to the MM Controller as an interface
to an external computer running E-Max software
for data processing and system control.
New 12x8 Stage for Large Workpieces
(MM-800 only)
An enhanced body design using Computer Aided Engineering
(CAE) for stress analysis enables the mounting of a larger stage to
accommodate larger workpieces. A 300 x 200mm (12" x 8") stroke
stage can be mounted to the MM-800.
Improved Interface with Data Processor
and Software
Interfacing to data processors and PC software has been greatly
improved to include comprehensive support throughout the entire
measurement process, from image capture and measurements, to
analysis and data storage.
Data Processor DP-E1
The DP-E1 Data Processor is compact, yet easy to use. For quick
measurements and data processing you can place the read-out
display near the eyepiece while the control pad is placed at your
fingertips. The DP-E1’s seamless interface to a PC platform makes
it easy to perform computations and management of your
measurement results.
Data Processing Software E-MAX Series
Digital image measuring performance of the E-MAX software has
been upgraded. Combined with Nikon’s digital camera and
measuring microscope, the system achieves digital image
measurements with precision never before possible.
3rd-party DRO Connectable (S Models)
The MM-400S, SL and MM-800S, SL models were created for use with
Metronics Quadra-Chek and other 3rd-party digital read-outs. They
offer an economical alternative if non-Nikon data processors are used.
DP-E1
※ QuadraChek is a trademark of Metronics Inc.
High-Precision Type (Factory Option)
The design of the MM-400/800 series measuring microscope has been
revamped to provide users with increased flexibility in choosing modules for
system configurations. You can configure the optimum system according to
your needs, including an ultrahigh-precision system boasting precision as high
as 1.5+L/100µm (L: measurement length in mm) with combination correction.
Also, since the construction of the entire microscope has improved rigidity, the
system exhibits excellent reliability during measurements with configurations
consisting of a digital camera and/or other accessories.
* For details on system configuration, contact Nikon.
MM-400/800 Combination Precision
Without correction: (3+L/50) µm
With correction: (1.5+L/100) µm
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
Travel distance (mm)
5
LM Models
3-Axis and Z-Motorized Model
The LM models have a built-in motorized Z-axis scale, enabling accurate 3axis measurements. In addition, the optional Focusing Aid uses a split prism
to ensure Z-axis focusing accuracy and minimize measurement errors caused
by the difference in the objective’s depth of focus.
MM-800/LM
FA
T
Connector - Housing Inside
LED
L
Configured with 10x6 stage,
trinocular optical FA head
Applications:
Dies & molds, Finely machined
parts, Stamped parts, Injection
molded parts, Medical devices
PGA - Insertion Pin
MM-400/LM
FA
LED
T
L
Configured with 6x4 stage,
trinocular optical FA head
*TE2-PS100W power supply is required
Specifications
Type
Z-axis movement
MM controller backpack interface
Optical head
Z-axis linear scale
Eyepiece
Objective
Stage
Light source
Diascopic
Episcopic
Max. workpiece height
Dimensions (W x D x H)/weight
6
MM-800/LM
MM-400/LM
Motorized (max. speed: 10mm/sec)
Built-in
Monocular optical head, Trinocular optical head, Trinocular optical FA head
Built-in
CFWN10x (Field No. 20)
Measuring microscope objectives
12x8, 10x6, 8x6
6x4, 4x4, O3L, 2x2
LED diascopic illuminator (standard), 12V-50W halogen light source (option)*
LED episcopic illuminator
200mm
150mm
385 x 785 x 725mm/approx. 65kg
300 x 600 x 638mm/approx. 50kg
LM
L/SLType
Models
3-Axis Measurement Model
With a built-in Z-axis scale, this type is the basic standard for Nikon’s measuring
microscope series. Various models are available—with or without Focusing Aid,
monocular or trinocular optical head. You can select the best one according to your
measuring range, use and budget. The SL model is recommended for 3rd-party (nonNikon) digital read-outs and therefore does not include the MM controller that
interfaces with the Nikon DRO.
MM-800/L
MM-800/SL with 3rd-party DRO
FA
2
T
LED
L
Plastic Gear Teeth with Smaller Module
Configured with 8x6 stage,
trinocular optical FA head
Applications:
Dies & molds, Finely machined parts,
Stamped parts, Injection molded
parts, Medical devices
MM-400/L
MM-400/SL with 3rd-party DRO
Black Injection Molding Parts - Connector
T
LED
2
L
Configured with 4x4 stage,
trinocular optical head
*TE2-PS100W power supply is required
Specifications
Type
Z-axis movement
MM controller backpack interface
Optical head
Z-axis linear scale
Eyepiece
Objective
Stage
Light source
Diascopic
Episcopic
Max. workpiece height
Dimensions (W x D x H)/weight
MM-800/L
MM-800/SL
MM-400/L
MM-400/SL
Manual (dual side coarse/fine focus knob)
Built-in
—
Built-in
—
Monocular optical head, Trinocular optical head, Trinocular optical FA head
Built-in
CFWN10x (Field No. 20)
Measuring microscope objectives
12x8, 10x6, 8x6
6x4, 4x4, O3L, 2x2
LED diascopic illuminator (standard), 12V-50W halogen light source (option)*
LED episcopic illuminator
200mm
150mm
385 x 785 x 725mm/approx. 65kg
300 x 600 x 638mm/approx. 50kg
7
2-Axis Models/S Models
MM-800/400/800S/400S (2-Axis Measurement Model)
These are the basic models in the MM-400/800 series. High in cost performance,
these models are expressly designed for 2-axis (XY) applications. To meet your
application and budget, various models are available—monocular or trinocular optical
heads, plus 12x8 large stage or 2x2 small stage sizes are available. The 400S and
800S models are specifically for use with non-Nikon digital read-outs.
MM-800
T
LED
2
Configured with 8x6 stage,
trinocular optical head
Applications:
Dies & molds, Finely machined
parts, Stamped parts, Injection
molded parts, Medical devices
MM-400
M
LED
2
Configured with 2x2 stage,
monocular optical head
*TE2-PS100W power supply is required
Specifications
Type
Z-axis movement
MM controller backpack interface
Optical head
Z-axis linear scale
Eyepiece
Objective
Stage
Light source
Diascopic
Episcopic
Max. workpiece height
Dimensions (W x D x H)/weight
8
MM-800
MM-400
Manual (dual side coarse/fine focus knob)
Built-in
Monocular optical head, Trinocular optical head
—
Dedicated 10x (Field No. 20)
Measuring microscope objectives
12x8, 10x6, 8x6
6x4, 4x4, O3L, 2x2
LED diascopic illuminator (standard), 12V-50W halogen light source (option)*
LED episcopic illuminator
200mm
150mm
385 x 785 x 725mm/approx. 65kg
300 x 600 x 638mm/approx. 50kg
MM-800/S with 3rd-party DRO
T
LED
2
Applications:
Stamped parts, Injection molded parts,
Medical devices, Drills, Micro tooling,
Automotive Components
Configured with 8x6 stage,
trinocular optical head,
Quadra-Chek®300
MM-400/S with 3rd-party DRO
T
LED
2
Configured with O3L stage,
trinocular optical head,
Quadra-Chek®200
*TE2-PS100W power supply is required
Specifications
Type
Z-axis movement
MM controller backpack interface
Optical head
Z-axis linear scale
Eyepiece
Objective
Stage
Light source
Diascopic
Episcopic
Max. workpiece height
Dimensions (W x D x H)/weight
MM-800/S
MM-400/S
Manual (dual side coarse/fine focus knob)
—
Monocular optical head, Trinocular optical head
—
CFWN10x (Field No. 20)
Measuring microscope objectives
12x8, 10x6, 8x6
6x4, 4x4, O3L, 2x2
LED diascopic illuminator (standard), 12V-50W halogen light source (option)*
LED episcopic illuminator
200mm
150mm
385 x 785 x 725mm/approx. 65kg
300 x 600 x 638mm/approx. 50kg
9