HL_Babytalker 3600 D106 ECO A2.fm

1
BABYTALKER 3600
3
3.1
2
3
6
1
Setting the Reproduction Volume of the Parent Unit
There are six volume settings. The lowest setting is ‘Volume OffVolume
uit’.
– Press button
26 to increase the volume.
– Press button
28 to decrease the volume.
1
A
Settings
7
12
4
•
8
11 10
9
3.2
Setting the Reproduction Volume of the Baby Unit
5
1
•
15
+
1x
AA
+
-
1 x AA
++
6V/300mA
+
ON
+
16
-
1 x AA
13
14
– Press button
– Press button
C
3.3
a
g
b
c
f
e
d
B
17
18
23
22
Other Settings
•
•
•
24
29
25
28
32
20
27
•
Night light
Lullaby
Microphone sensitivity
‘SensitivityGevoelighei
d’
Audible alert ‘Sound
Alert--GELUID--’
26
•
•
•
•
90° MAX
OPEN
23 ) of
Temperature (units, allowed
range, alert)
Clock
Feed time
Display language
‘LanguageTaal’
(see “2.2 Setting the Display
Language”)
To navigate between menu items, use button
26 or button
To select the indicated setting, press button
27 .
To return to a previous menu item or exit the menu, press button
30
B
9 to increase the volume.
11 to decrease the volume.
The following settings can be configured from the menu (button
the parent unit:
19
21
This setting applies to the “Talking With Your Baby“
and “Playing a Lullaby“ functions.
-
NEMO
OFF
If the ‘Volume OffVolume uit’ setting is selected, the
sounds picked up by the baby unit are only indicated
by the volume LEDs 17 .
28 .
23 .
A
31
+
33
ENGLISH
1
Getting started
Thank you for purchasing this TOPCOM product. This
product has been designed and assembled with utmost
care for you and the environment. Because we at
TOPCOM like to think of the future of our planet and our
children, we aim to do our best to help saving the
environment. This is why we decided to reduce the
number of pages of our user guides and product manuals.
If you keep in mind that it takes up to 24 trees to produce
1 ton of paper, publishing product manuals in many
languages costs our planet a lot of trees. In this short manual provided with
your TOPCOM device you can find a brief explanation of how to install and
use your TOPCOM device.If you would still like to discover all the features
of your new TOPCOM device, please visit our website (www.topcom.net)
where you can download the complete user manual in your language. By
doing this TOPCOM hopes to do its share to make our planet a better place,
but we can only succeed with your help!
1.1
Installing Batteries in the Baby Unit
See Figure
on the fold-out page.
A
•
You can operate the baby unit with three AA cells
(LR06/Mignon; we recommend alkaline cells) or
the included AC mains adapter.
The baby unit cannot recharge batteries.
It is recommended to always leave the batteries in
the unit, even if you use the AC mains adapter.
The unit will automatically switch to battery power
in case of a mains power interruption.
•
•
– Rotate the belt clip 15 upward.
– Turn the screw on the cover of the battery compartment 13 at the
back of the baby unit 90° counterclockwise and remove the
battery compartment cover.
•
Do not turn the screw past the ‘Open’ point.
– Fit three AA alkaline cells (LR06/Mignon) in the battery
compartment. Ensure that the polarity is correct.
– Close the battery compartment.
•
1.2
Never mix used cells with fresh cells.
Connecting the Baby Unit to the AC Mains
Insert the small plug of the AC mains adapter in the mains power connector
of the baby unit 14 and plug the AC mains adapter into a mains connector
(230 V / 50 Hz).
•
•
1.3
CAUTION
The mains connector must be within easy reach so you can
quickly unplug the power cable in an emergency.
Use only the supplied AC mains adapter (6 V DC / 300 mA).
Installing Rechargeable Batteries in the Parent Unit
See Figure
•
on the fold-out page.
B
CAUTION
Use only the supplied NiMH battery pack in the parent unit.
– Rotate the belt clip 30 upward.
– Turn the screw on the cover 31 of the battery compartment at the
back of the parent unit 90° counterclockwise and remove the
battery compartment cover.
•
Do not turn the screw past the ‘Open’ point.
– Place the NiMH battery pack in the battery compartment.
Ensure that the tab of the battery pack fits in the corresponding
recess and that the polarity matches the figure (B).
– Carefully close the battery compartment and rotate the belt clip
back downward.
1.4
2
2.1
Installing the Parent Unit charging cradle
– Insert the small plug of the AC mains adapter in the mains power
connector 32 of the charging station and plug the AC mains
adapter into a mains connector (230 V / 50 Hz).
– Place the parent unit in the charging station. The red Charging
LED 33 will go on.
Operation and Use
Switching the Baby Unit and Parent Unit On and Off
29 to switch on the parent unit. The
– Press the On/Off switch
display 22 is activated.
– Press the On/Off switch
display 3 is activated.
•
12 to switch on the baby unit. The
The parent unit will try to establish a connection with
the baby unit. If the Link LED 21 goes on, a
connection has been established.
– Press the On/Off switch
29 to switch off the parent
unit (press and hold until the display goes blank).
– Press the On/Off switch
12 to switch off the baby unit (press
and hold until the display goes blank).
2.2
2.3
Setting the Display Language
– Press button
23 . ‘Night lightNachtlamp’is displayed.
26 until ‘LanguageTaal’ is
– Repeatedly press button
displayed.
– Press button
27 . The current language is displayed.
– Repeatedly press button
26 or
28 until the desired
language is displayed.
– Press button
27 to confirm the language.
– Press button
23 to exit the menu.
NEMo Switch Setting
The Babytalker 3600 is based on the unique NEMo technology, which lets
parents set the radiated power of the equipment. This babyphone
(complying with the DECT standard) allows NEMo operation (No emission
mode).The baby unit reduces its transmitting power according to the
distance from the parent unit during communication. The baby & parent unit
handset reduces its radio output to zero if the babyunit doesn’t receive any
sound. This does not mean that the normal DECT radiation is harmful to
health, but that NEMo mode avoids unnecessary radiation exposure. You
can turn the NEMo function on/off by a switch 16 at the back of the babyunit
•
If NEMo is turned ON and the baby unit picks up noise,
it will take about 3 seconds before the parent unit will
turn on the speaker.
If you want to have a quicker response you can turn the NEMo function
OFF. By turn OFF the NEMo function you will have always communication
between the baby-and parent unit (even when there is no noise).
To turn it ON/OFF:
– Turn off both parent- and baby unit.
– Slide the switch to ON or OFF at the back of baby unit.
– Power up both units (no need to concern which unit first)
Babytalker 3600
www.topcom.net
This product is in compliance with the essential requirements and other relevant provisions of the R&TTE directive 1999/5/EC. The Declaration of conformity can be found on: http://www.topcom.net/cedeclarations.asp
MD10600412 ECO V1.0
2
Babytalker 3600
www.topcom.net
This product is in compliance with the essential requirements and other relevant provisions of the R&TTE directive 1999/5/EC. The Declaration of conformity can be found on: http://www.topcom.net/cedeclarations.asp
MD10600412 ECO V1.0