Features HPC-7242 2U Rackmount Chassis for ATX Motherboard

HPC-7242
2U Rackmount Chassis for ATX Motherboard with
4 Hot-Swap SAS/SATA HDD Trays and RPS
Features
NEW
ƒƒ Supports ATX motherboard with dual processors
ƒƒ Four shock-resistant hot-swap disk trays supporting 3.5" or 2.5" SAS/SATA
drives for RAID 5/10 application, one slim ODD, and two 2.5" internal drives
ƒƒ Dual front USB 3.0 ports
ƒƒ Supports 80plus single or redundant power supply up to 700W
ƒƒ Front-accessible system fan without opening top cover for easy maintenance
ƒƒ LED indicators and audible alarm notification for system fault detection
ƒƒ Built-in Intelligent System Module enabling whole system fan control and
remote manageability
RoHS
COMPLIANT
2002/95/EC
Specifications
Drive Bay
Cooling
Front I/O Interface
Miscellaneous
Intelligent System Module
Remote Monitoring
Environment
Physical Characteristics
External
Internal
Slim Optical Drive
1
2.5"
1
Hot Swap
4 SAS/SATA HDDs
Fan
1 (8 cm/47CFM) + 2 (6 cm/28CFM) for SAS/SATA storage unit
Air Filter
Yes
USB 3.0*
2
LED Indicators
Power, HDD, temperature, fan, LAN1, and LAN2
Rear Panel
Two 9-pin D-Sub
CPU/System fan speed, CPU/System temperature, motherboard voltage
(Only selected Advantech MBs/CPU cards with SUSIAccess installed can fully enabled these functions, check with Advantech local rep. for detailed
information.)
Operating
Non-Operating
Temperature
0 ~ 50° C (32 ~ 122° F)
-40 ~ 70° C (-40 ~ 156° F)
Humidity
10 ~ 95% @ 40° C, non-condensing
10 ~ 95% @ 60° C, non-condensing
Vibration (5 ~ 500 Hz)
1 Grms
2G
Shock
10 G (with 11 ms duration, half sine wave)
Dimensions (W x H x D)
482 x 88 x 525 mm (19" x 3.46" x 20.67")
Weight
13.7 kg (30.12 lb)
* The USB ports do not operate if a main board without on-board USB 3.0 internal box header is installed.
Front view
Switch/buttons
USB 3.0 x2 LED indicators Slim optical drive bay
Front-accessible fan
without opening top cover
Hot-swap HDD tray x4
Rear view
Thumb screws
Single or redundant
PSU supported
Top view
Supports ATX form
factor motherboard
Easy-to-maintain
storage fan kit with
thumb screw
Rear I/O bracket for low profile
add-on cards
Internal 2.5" x2
drive bays
Intelligent System
Module
Case open switch
*Note: Motherboard and power supply are not included.
Industrial Computer Chassis
All product specifications are subject to change without notice
Last updated : 16-Sep-2014
HPC-7242
Dimensions
Unit: mm [inch]
426.4 [16.79]
523.8 [20.62]
566.3 [22.30]
44.4
[1.75]
76.2 [3.00]
88.4 [3.48]
61.1
92
[2.41] [3.62]
92
[3.62]
92
[3.62]
92
[3.62]
42.1 [1.66]
464.5 [18.29]
482 [18.98]
Ordering Information
Part Number
HPC-7242MB-00XE
Optional Accessories
Description
Without PSU, with ATX switch
Part Number
9662132020E
1990021407T000
Power Supply Options
Part Number
80 Plus
Grade
Wattage
PS8-350FATX-XE
Bronze
350W
PS8-500U2-XE
Bronze
500W
RPS8-500U2-XE
Bronze
500W
RPS8-700U2-XE
Bronze
700W
Type
Single
Single
(1+1)
Redundant
(1+1)
Redundant
Description
Black mobile HDD tray
Door filter
Spare Parts
Input
AC 100 ~ 240 V
(full range)
AC 100 ~ 240 V
(full range)
AC 100 ~ 240 V
(full range)
AC 100 ~ 240 V
(full range)
Part Number
Description
96CB-SATAPOWER-6P1 SATA power wire 6-pin to big 4-pin (for slim ODD)
1950014302N001
Special bracket for riser card AIMB-RP3P8-12A1E
Rear I/O panel kit for low-profile add-on cards
1939000361
Screw (should purchase 7 pcs)
1960034816N000
I/O bracket (should purchase 7 pcs)
1960019475T201
Rear panel for low-profile
Online Download www.advantech.com/products