Triple Speed Gigabit Converter 10/100/1000BaseT to

Triple Speed Gigabit Converter
10/100/1000BaseT to 1000BaseX
10/100/1000Base-T to 1000Base-SX/LX A/N triple
speed advanced converter
Complies with IEEE standards 802.3/802.3u,
802.3ab and 802.3z
Supports jumbo frames up-to 9K bytes
Supports PONL (Propagation Of No Link)
Green, significant power savings link down
Store-and-Forwards or fast Cut-Through modes
Auto-negotiation, auto MDI/MDIX and polarity correction
Copper cable up to 100m on Cat5, 5e or 6 TP cable
SFP and Fix fiber optic interfaces (SC or LC)
Multimedia fiber: up to 220/550m (62.5/50m MMF)
and special version for 2km (SC or LC connectors)
Singlemode fiber: dual fiber up to 70km, single fiber up
to 20km and CWDM up to 80km (SC or LC connector)
Highly visible LED indicators
External universal power adaptor (EPS)
The WL-620B is a stand alone triple speed Gigabit converter providing conversion
between 10/100/1000Base-T/TX copper media (RJ45) and 1000Base-SX/LX fiber
media in compliance with IEEE 802.3 standards.
Using high speed non-blocking switching technology the WL-620B enables speed
conversion and highly reliable data transfer over F/O links. The converter operates
in Store & Forward or fast Cut-Through modes and support PONL for end-toend link verification. PONL (Propagation Of No Link) algorithm will force down
a converter port once the other converter port looses its link. Both the converter
operation mode and PONL are internal (protected) DIP switch selectable.
The WL-620B supports 10/100/1000Base-T auto-negotiation, auto MDI/MDIX and
polarity correction on the copper port, and 1000Base-SX/LX auto-negotiation on
the fiber port. The converter supports jumbo frames up-to 9K bytes.
The fiber port is available with SFP port (recommended with WizLAN approved
SFP tranceivers) or fixed SC or LC connectors for duplex multi-mode or singlemode fibers and single fibre single-mode fiber (SC).
Per port indicators provide high visibility of port
status and converter activity in both desktop and
wall mounting.
The WL-620B is a GREEN product, providing
segnificant power saving on the disconnection of the
copper port.
Gigabit F/O links
Typical Configuration
Gigabit L2H
WL-620B
NMS
station
WL-620B
WL-620B
Central
WL-620B
Switch/Router
Gigabit FTTO
WL-620B
Conversion Center
Technical Specifications
Fiber Optic
WL-620B 10/100/1000Base-T to 1000Base-SX/LX Triple Speed Gigabit converter
Fiber port: 1000Base-SX/LX (SC/LC or SFP)
Media and Connectors:
Multimode (MM), 850nm Connectors: SFP or SC, LC
Singlemode (SM), 1310/1550nm Connectors: SFP or SC, LC
Distance / power budget:
Multimode (MM 62.5/125, 50/125) 220/550m / 8dB
(MM 62.5/125, 50/125) 2km (M2 special model)
Singlemode (SM 9/125 )
10km/10dB, 20km/17dB (1310nm)
50km/17dB, 70km/24dB (1550nm)
Single Fiber (SM, SF dual wavelength) 10km/12dB
20km/17dB
Copper Port: 10/100/1000Base-T/TX
10/100/1000Base-T/TX RJ-45, auto MDI/MDIX and auto polarity correction
Auto-negotiation
100 meter (330 ft) distance over TP cables Cat5, 5e and 6
Features:
Auto-negotiation on both TP (copper) and fiber ports
Auto MDI/MDIX and auto polarity correction
PONL - Propagation Of No Link
Technology:
LED Indicators:
POWER:
Power ON indication
Fiber port:
Link/Activity
Copper (TP) port: Link/Activity, 1000M speed
Power:
EPS (External Power Adaptor), AC input: 100-240VAC 50/60Hz
DC output: 5 VDC, 2 Amp Polarity:
Standards Compliance:
IEEE802.3, 802.3u, 802.3ab and 802.3z
Safety and Emission Standards:
CE, FCC Part 15, EN60950
Dimensions:
WL-620B
Environment:
Width
96mm(3.8")
0
0
Depth
104mm(4.1")
0
Height
27mm(1.1")
0
Operating Temp.: 0 C to 45 C (32 F to 113 F)
0
0
0
0
Storage: -30 C to 70 C (-22 F to 149 F)
Humidity: 10% to 90% non-condensing
Store & Forward or fast cut-through, high speed, non-blocking switching
technology
Maximum frame size: 9K bytes
Ordering Information:
WL-620B/__/__ /__ Triple speed Gigabit converter, one port 10/100/1000Base-T, one 1000Base-X F/O port ([fiber type], [connector type]). Inc. External Universal
power adaptor (EPS)
Ordering terminology:
WL-620B/[Fiber type]/[connector type]
SC or LC
M
= Multimode, 850nm, 0-220/550m
M2
= Multimode, 0-2km
S
= Singlemode, 1310nm, 10 dB, 0-10km
S1
= Singlemode, 1310nm, 17dB, 0-20km
S2
= Singlemode, 1550nm, 17dB, 10-50km
S3
= Singlemode, 1550nm, 247dB, 30-70km
SF-A/B/S = Single Fiber, SM -1550/1310nm, 12dB, 0-10km
SF-A/B/S1 = Single Fiber, SM -1550/1310nm, 17dB, 0-20km
or
SFP (for WizLAN approved SFP transceivers)
Dual wavelength works in pairs: Type A (SF-A) TX-1550nm/RX-1310nm
connects to type B (SF-B) TX-1310nm/RX-1550nm
Example: WL-620B/S/SC Triple speed Gigabit converter, one port 10/100/1000BaseT, one 1000BaseX F/O port (Singlemode, 1310nm, 10 dB, 0-10km, SC),
Inc. External Universal power adaptor (EPS).
01