WSD-600 R12

Cyber Security Products
Gigabit Ethernet Single/Uni-Directional fiberoptic coupled
network isolator - Network to Network Data Diode.
Used for secured Single/Uni-Directional data transfers in
Critical Infrastructure and highly secured and sensitive
Networks. CIP device.
Compatible with any Uni-Directional data transfer
application.
Pure HW unmanaged device, assures absolute immunity,
security, hacker/intrusion proof device.
Composed of dual, fiber-optic coupled, transparent data
diodes. Support any frame size.
Auto-negotiation, auto MDI 1000Base-T standard interfaces.
Supports Uni-Direction end to end verification of link integrity.
Includes dual power inlets and power supplies for complete
network isolation.
19” 1U desktop and rack mount installation.
Plug & Play installation and operation.
The WSD-600 is a Gigabit Ethernet Single/Uni-Directional network to network fiberoptic coupled isolation device Network to Network Diode, design and approved for Critical Infrastructure Protection (CIP) secured communication.
WSD-600 is pure HW unmanaged device composed of a pair of single/uni-directional transparent network diodes
(based on WSD-6) internally connected by a single fiber optic cable. The two diodes are powered by two separated
power supplies.
The unique diode implementation and product architecture of the WSD-600 assures complete isolation between the
networks as well as provides utmost immunity and security for single/uni-directional communication between two
networks.
The WSD-600 located isolated in front of the network endpoint servers running the data transfer applications, provide
uncompromising single/uni-direction cyber immune solution eliminating threats like intrusion, embedding and hacking.
The WSD-600 is compatible with any single/uni-direction data transfer SW application, either provided by WizLAN, a
third party or developed by the end user.
WizLAN software application, VectorIT, facilitates unidirectional transfer of certain TCP-based protocols as well as raw
files over standard Ethernet interfaces with utilization of up-to full wire speed. Currently supported protocols are FTP,
SMTP, TCP and raw files. The software is dedicated to and employs only uni-directional data flow over single or
bidirectional link.
The WSD-600 includes a unique link verification function in which the link of the incoming endpoint (receiving server)
will drop if there is any problem with the end to end link continuity up-to the outgoing endpoint (transmitting server).
This is a powerful HW management feature
especially for single direction applications.
The WSD-600 is a plug & play device that
doesn’t require any setup and includes
visible LED indications that assure fast &
easy installation, operation and maintenance.
Typical Configuration
Network to Network Isolator
Data Diode
Red Network
Outgoing
Endpoint srv.
Data transfer Appl.
Outgoing Side
Black Network
Incoming
Endpoint srv.
Net In (RX)
Data transfer Appl.
Incoming Side
Net Out (TX)
Fiber Optic Cable
TXO
RXO
Technical Specifications
WSD-600 Single/Uni-Directional Network to Network Gigabit Data Diode
Technology
1000Base-T Copper TP Network ports (RJ45)
Pure HW based single/uni-direction physical layer transparent 3R repeater
(Re timing, Reshaping and Regeneration).
Fully transparent, supports any frame length.
1000Base-T, auto-negotiation Auto MDI/MDIX and polarity
100meter (330 ft) distance over CAT5e or above TP cables
1000Base-SX Fiber Optic Ports (internal)
interconnected by MM F/O patch cord inside the unit.
Standard Compliance
LED Indicators
Network In side
Environment
IEEE802.3ab, IEEE802.3z
POWER 1 - Main power supplied and power supply 1 is “ON”
POWER 2 - Main power supplied and power supply 2 (redundant) is “ON”
Standard
Operating Temp (°C):
Operating Temp (°F):
Net In - LINK/ACT - Link/Activity indication for the Network In
1000Base-T port
F/O - Link/Act - Link/Activity indication of the internal F/O diode port
Storage:
Humidity:
Network Out side
CE, FCC part 15, EN60950
POWER 1 - Main power supplied and power supply 1 is “ON”
POWER 2 - Main power supplied and power supply 2 (redundant) is “ON”
IND
0 to +45
32 to 113
-20 to +70
-4 to 158
-40 to +85°C (-40 to 185°F)
10% to 90% non-condensing
Safety and Emission
Power
Net Out - LINK/ACT - Link/Activity indication for the Network Out
1000Base-T port
F/O - Link/Act - Link/Activity indication of the internal F/O diode port
Two separated and isolated wide range power supplies, TX side and RX side.
AC inputs: 85 - 264VAC 47-440Hz.
Max. power consumption: 5Watts per side/PS.
Optional: Redundant (total of four) power supplies
Link Verification (PONL option, pre-set at factory)
Installation
The Link of the NIC of the Incoming endstation server will be established “ON”
only if the WSD-600 operates properly and its Link with the Outgoing endstation
server is properly established.
19” 1U rackmount or desktop
Module Dimension
WSD-600
Height (1U)
44mm(1.75”)
Width
483mm(19”)
Depth
225mm(8.9”)
VectorIT Software (optional sold seperately)
The software facilitates unidirectional transfer of certain TCP-based protocols as well as raw files over standard Ethernet interface. All data between the two endpoints
flows in one direction only, which can be further enforced and secured by the hardware. Currently supports FTP, SMTP, TCP and raw files.
VectorIT application is installed on dedicated machines, servers or workstations running Windows OS (not supplied) on both networks endpoints.
Ordering Information
WSD-600/_/_ Network to Network single/uni-directional F/O coupled transparent data diode, 1000Base-T to 1000Base-T, [environment]/[Options].
VectorIT
Unidirectional data transfer SW application, supports certain TCP-based protocols as well as raw files over standard Ethernet interface. Please
contact WizLAN for more information.
Ordering terminology
WSD-600/[environment]/[option]
[ ] - Standard Temp. 0°C to +45°C
IND - Industrial Temp. -20°C to +70°C
[ ] - two power supplies
[R] - four (redundant) power supplies
Example: WSD-600 Network to Network single/uni-directional F/O coupled transparent data diode, 1000Base-T to 1000Base-T.
All specifications are subject to change without notice. Neither manufacturer nor seller shall be liable for any loss, damage or injury, direct or consequential, arising from the inability to use the product.
Rev-1.2 12/14