Opti-Core® Push-Pull LC Duplex Fiber Optic Patch Cords

Opti-Core® Push-Pull LC Duplex
Fiber Optic Patch Cords
S P E C I F I C AT I O N S H E E T
technical information
Push-Pull LC Duplex Fiber Optic Patch Cords containing the custom push-pull strain
relief boot and duplex clip, allow users easy accessibility when deploying very high
density LC patch fields in data center applications. Available in riser (OFNR), and low
smoke zero halogen (LSZH) rated jacket materials to comply with local cabling
ordinances and OM4, OM3 or OS1/OS2 fiber types to meet the demands of today's
highest speed applications.
application
Provide interconnect and cross-connect of applications in entrance facilities, telecommunication rooms, data centers, at the
desk and network applications to interconnect pre-terminated cassettes in main distribution, horizontal distribution, and
equipment distribution areas.
construction
physical properties
Fiber count:
Duplex (2-fiber) jacketed zipcord
Cable outside diameter (OD):
1.6mm duplex
Cable jacket
ratings:
Riser (OFNR)
Low Smoke Zero Halogen
(LSZH) per: IEC 60332-1-2,
IEC 60332-3-24, IEC 60754-1,
IEC 60754-2, IEC 61034-2
Bend Radius (min) Short-Term:
16mm
Bend Radius (min) Long-Term:
32mm
Connector cable retention:
50N (4.24lb) @ 0°
19.4N (4.4lb)@ 90°
Singlemode: OS1/OS2 9/125µm
Multimode: OM3 50/125µm
OM4 50/125µm
Connector durability:
500 cycles
Fiber types:
Connector types,
End ‘A’:
Duplex LC
Connector types,
End ‘B’:
Duplex LC
Jacket color:
OS1/OS2: Yellow
OM3:Aqua
OM4:Aqua
optical properties
environmental properties
Connector
insertion loss:
Storage and
wshipping temperature:
-40°C to 70°C
Operating and
installation temperature:
-10°C to 60°C
Connector
return loss:
Standard: 0.25dB max (OM3 and OM4)
0.35dB max (OS2)
Optimized: 0.15dB max (OM3 and OM4)
Ultra:
0.10dB max (OM4)
26dB min (OM3 and OM4)
55dB min (OS1/OS2)
standards
Meets or exceeds ISO/IEC 11801, TIA-568-C.3,
TIA-604-10 (FOCIS-10)
Restriction of Hazardous
Substances (RoHS) Compliance:
w w w. p an d uit .co m
All patch cord
components meet
the requirement
of Directive
2002/95/EC
Opti-Core® Push-Pull LC Duplex Fiber Optic Patch Cords
part number configurator
Example: FX2ERQ1Q1SNM005 = Fiber, OM3, 2-fiber, 1.6mm cable, riser rated, LC push-pull connector to LC push-pull connector, standard IL,
5 meters
Character
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Example
F
X
2
E
R
Q
1
Q
1
S
N
M
0
0
5
1
2
3
4
5
– Fiber Product
F = Fiber
– Fiber Type
X = OM3 50/125µm
Z = OM4 50/125µm
9 = OS1/OS2 9/125µm
– Fiber Count
2 = 2-fiber
– Cable Type
E = 1.6mm
– Jacket Type
L = LSZH (Low Smoke Zero Halogen)
R = OFNR (Riser)
6 – Connector Type
Q = LC Push-Pull connector
7 – Connector Variant
1 = 1st Gen (Low Profile Duplex LC)
8 – Connector Type
Q = LC Push-Pull connector
9 – Connector Variant
1 = 1st Gen (Low Profile Duplex LC)
10 – Performance/Construction
S = Standard IL/Straight Through (A-B)
O = Optimized IL/Straight Through (A-B)
N = Ultra IL/Straight Through (A-B)
11 – Connector Variant
N = No variant
12 – Unit of Length
M = Meters
F = Feet
13, 14, 15 – Length
001 - 050 in 1 meter increments
1/2 meter increments available between 1 and 10 meters, ex 3.5
Foot-length increments available from 1 to 25 feet in Riser-rated
jacket only
polarity changeover
1
2
Retaining
feature
3
Duplex clip
A
B
Squeeze both sides of the
boot. Squeezing sides lifts
boot over retaining feature.
Carefully slide boot
backward while still
squeezing sides.
Remove both connectors from duplex clip
and switch positions of A/B. Only perform
this change on one end of the patch cord.
Other options are available as follows; contact Panduit for part number.
Fiber type: OM4+ Signature Core™
Performance/Construction: Optimized IL – Straight Through (A-B), Optimized IL – Flipped (A-A),
Standard IL – Flipped (A-A)
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA
Markham, Ontario
cs-cdn@panduit.com
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
cs-emea@panduit.com
Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
cs-ap@panduit.com
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
cs-japan@panduit.com
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Guadalajara, Mexico
cs-la@panduit.com
Phone: 52.33.3777.6000
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
cs-aus@panduit.com
Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
Visit us at www.panduit.com
Contact Customer Service by email: cs@panduit.com
or by phone: 800.777.3300
©2015 Panduit Corp.
ALL RIGHTS RESERVED.
FBSP90--WW-ENG
2/2015