LT-932-OLED Pdf

Dimming Curve: 0.1~9.9
www.ltech-led.com
Product Introduction:
1. Designed for Hi-power multiple channels application, 32 channels output, and Max.
3A current per channel, up to 2304W output power.
2. Easy operation with OLED screen and the touch buttons.
3. 4 kinds of mode optional: single color, color temperature, RGB, RGBW
4. Support 4 kinds of DMX ports with signal isolation function: XLR-3, XLR-5, RJ45 and
green terminal (with signal amplifier function).
5. With RDM remote management protocol, the operations can be completed via the
RDM master console, such as parameters browsing & setting, DMX address setting,
equipment recognization, etc.
6. 16bit/8bit resolution and multiple dimming curve optional.
Dimming Curve: 0.1~9.9
Photoelectric
isolation
1
Main Component Descriition:
Technical Specs:
Model :
LT-932-OLED
Input Signal :
DMX/RDM
Input Voltage :
12~24Vdc
Current Load :
3A x 32CH Max 96A
Output Power :
(0~36W...72W)x 32CH Max 2304W
DMX Interface :
XLR-3, XLR-5, RJ45, Green terminal
Control Mode :
Dimming/CT/RGB/RGBW
Dimming Curve :
0.1~9.9
XLR-5
XLR-3
RJ45
Green Terminal
(with signal amplifier function)
Grey Level :
8bit(256 levels) / 16bit(65536 levels)
Photoelectric Isolation :
Yes
Working Temperature :
-30℃~55℃
Dimensions :
L300×W122×H39mm
Package Size :
L309×W127×H41mm
Weight (G.W.) :
1050g
12-24Vdc
Power Input
DMX/RDM Input & Output
Green Terminal
LED Lamps Connection
The power
indicator
The signal
indicator
OLED Screen
DC1 DC2 DC3 DC4
Product Size:
2
Powered by DC1
Powered by DC2
Powered by DC3
Powered by DC4
Max. 24A
Max. 24A
Max. 24A
Max. 24A
3
OLED Screen Interface:
Press "M" key, switch entries.
5. Dimming Curve
Press "∨" or “∨" key to switch dimming
curve
Press "∧" or “∨" key, parameter adjustment.
Long press “M” key, back to main page.
Optional : Standard
Linear
0.1~9.9
Exit: back to previous page.
Main page
Press "∨" or “∨" key to set DMX address
1. DMX Address
Setting
Range: 1~512
2. PWM
Frequency
Optional: High
Press "∨" or “∨" key to enter submenu
6. Tool
Press "∨" or “∨" key to switch frequency
EXIT (Press"∨" key)
Std (standard)
7. Test
Press "∨" or “∨" key to enter submenu
Press "∨" or “∨" key to switch mode
3. Mode
Optional : Dim
CT
RGB
RGBW
Press "∨" or “∨" key to switch resolution
4. Resolution
Brightness setting
Range: 0~255
Optional : 8bit
Page turning (press"∨" or “∨" key)
EXIT (Press"∨" key)
16bit
4
5
Wiring diagram:
Single color
LEDs
1 Connecting LED lights:
Connecting
Single color
LEDs
Color Temperature
LEDs
Connecting
CT LEDs
Output Port
(Wiring method on P7)
RGB
LEDs
Connecting
RGB LEDs
RGBW
LEDs
Connecting
RGBW LEDs
6
7
3. The connection diagram of 4 kinds of DMX/RDM terminals:
2. DMX console connection:
LT-932-OLED is equipped with 4 types DMX terminals for
users’ selection. The following diagram takes XLR-3 as an
example, same connecting method for the rest three: RJ45
XLR-5 Connected in Parallel
terminal & XLR-5 terminal & green terminal (with amplifier
function)
XLR-3 Connected in Parallel
Green Terminal Connected in Parallel
*
If the recoil effect occurs because of longer signal line or bad line quality, please try to
connect 0.25W 90-120Ω terminal resistor at the end of each line.
*
An amplifier is needed when more than 32 decoders are connected, signal amplification
should not be more than 5 times continuously.
RJ45 Connected in Parallel
These 4 terminals can be connected in a mixed way.
8
9
Address setting table
4. The connection diagram of AMP signal amplifier terminal:
Mode
DIM
CT
RGB
RGBW
Mode
DIM
CT
RGB
Address
Quantity
8
16
24
32
Address
Quantity
16
32
48
64
Resolution
8bit
8bit
8bit
8bit
Resolution
16bit
16bit
16bit
16bit
1
001
001
001
001
1
2
001
002
002
002
2
3
001
001
003
003
3
4
001
002
003
004
4
5
002
003
004
005
5
6
002
004
005
006
6
7
002
003
006
007
7
8
002
004
006
008
8
9
003
005
007
009
9
10
003
006
008
010
10
11
003
005
009
011
11
12
003
006
009
012
13
004
007
010
013
14
004
008
011
014
14
15
004
007
012
015
15
16
004
008
012
016
16
17
005
009
013
017
17
18
005
010
014
018
18
19
005
009
015
019
19
20
005
010
015
020
20
21
006
011
016
021
21
22
006
012
017
022
22
23
006
011
018
023
23
24
006
012
018
024
24
25
007
013
019
025
25
26
007
014
020
026
26
27
007
013
021
027
27
28
007
014
021
028
28
29
008
015
022
029
29
30
008
016
023
030
30
31
008
015
024
031
31
32
008
016
024
032
32
001
002
001
002
001
002
001
002
003
004
003
004
003
004
003
004
005
006
005
006
005
006
005
006
007
008
007
008
007
008
007
008
009
010
009
010
009
010
009
010
011
012
011
012
011
012
011
012
013
014
013
014
013
014
013
014
015
016
015
016
015
016
015
016
001
002
003
004
001
002
003
004
005
006
007
008
005
006
007
008
009
010
011
012
009
010
011
012
013
014
015
016
013
014
015
016
017
018
019
020
017
018
019
020
021
022
023
024
021
022
023
024
025
026
027
028
025
026
027
028
029
030
031
032
029
030
031
032
001
002
003
004
005
006
005
006
007
008
009
010
011
012
011
012
013
014
015
016
017
018
017
018
019
020
021
022
023
024
023
024
025
026
027
028
029
030
029
030
031
032
033
034
035
036
035
036
037
038
039
040
041
042
041
042
043
044
045
046
047
048
047
048
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
025
026
027
028
029
030
031
032
033
034
035
036
037
038
039
040
041
042
043
044
045
046
047
048
049
050
051
052
053
054
055
056
057
058
059
060
061
062
063
064
Channel
interface can be used for signal amplification when too many DMX decoder are connected or
* AMP
signal line is too long, signal amplification should be no more than 5 times continuously.
10
12
Channel
11
13
RGBW
Attention:
1. The product shall be installed and serviced by the qualified person.
2. This product is non-waterproof. Please avoid the sun and rain. When installed outdoors
please ensure it is mounted in a water proof enclosure.
3. Good heat dissipation will prolong the working life of the controller. Please ensure good
ventilation.
4. Please check if the output voltage of the LED power supply used comply with the
working voltage of the product.
5. Please ensure that adequate sized cable is used from the controller to the LED lights
to carry the current. Please also ensure that the cable is secured tightly in the connector.
6. Ensure all wire connections and polarities are correct before applying power to avoid
any damages to the LED lights.
7. If a fault occurs, please return the product to your supplier. Do not attempt to fix this
product by yourself.
Warranty Agreement:
1. We provide lifelong technical assistance with this product:
A 5-year warranty is given from the date of purchase. The warranty is for free
repair or replacement if cover manufacturing faults only.
For faults beyond the 5-year warranty, we reserve the right to charge for time
and parts.
2. Warranty exclusions below:
Any man-made damages caused from improper operation, or connecting to
excess voltage and overloading.
The product appears to have excessive physical damage.
Damage due to natural disasters and force majeure.
Warranty label, fragile label and unique barcode label have been damaged.
The product has been replaced by a brand new product.
3. Repair or replacement as provided under this warranty is the exclusive remedy
to the customer. We shall not be liable for any incidental or consequential
damages for breach of any stipulation in this warranty.
4. Any amendment or adjustment to this warranty must be approved in writing by our
company only.
★ This manual only applies to this model. We reserve the right to make changes
without prior notice.
www.ltech-led.com
12
Update Time: 2016.10.18