multiCLASS Magstripe Reader Datasheet

PHYSICAL ACCESS READERS
multiCLASS® Magnetic
Stripe Readers
13.56 MHZ CONTACTLESS AND 125 KHZ PROXIMITY
CARD READERS
ƒƒ
Simple Migration – From legacy magstripe and proximity technologies to 13.56 MHz
smart card technology
ƒƒ
Increased On-site Security – Replace magstripe backplate with standard backplate
for contactless 13.56 MHz-only compatibility after site migration
ƒƒ
Dual Factor Authentication – Combine contactless card presentation with a PIN
ƒƒ
GSA-approved – Included on the U.S. General Services Administration (GSA) FIPS
201 Approved Products List (APL)
multiCLASS® Magnetic Stripe readers are
secure technology across multiple facilities.
designed for customers upgrading their current
Organizations switching to the multiCLASS
access control card system from the popular
reader’s enhanced security can also increase
magnetic stripe (“magstripe”) technology
convenience and draw more return on credential
to the enhanced security of 13.56 MHz smart
investment by adding applications enabled by a
card technology. Supporting access control
single card.
technology combinations including magnetic
stripe, keypad, HID Prox and 13.56 MHz
smart card technology (including iCLASS®),
the multiCLASS Magnetic Stripe reader line
represents the ultimate in flexibility, enabling a
cost effective, time-feasible and truly seamless
migration solution with no operational disruption.
The removable vertical magnetic stripe reader
and contactless 125 kHz support make user
interaction with the reader familiar, maintaining
operational access throughout the facility and
reducing user confusion during migration.
Designed for flexibility, the vertical magstripe
backplate can be mounted on the left or right
Migration products without reader and credential
side of the core contactless wallswitch reader
components can require large initial capital
frame. After a site fully migrates off magstripe
investments; the multiCLASS Magnetic Stripe
cards, users can replace the magstripe backplate
reader line features an affordable, standards-
with a standard backplate for increased security
based migration path to secure credential
from contactless 13.56 MHz-only compatibility.
technology. By implementing a solution based
on multiCLASS Magnetic Stripe readers and
HID multi-technology credentials, organizations
can integrate the migration into their existing
badging programs, supporting a low investment
level spread over time for migration to a
hidglobal.com
The multiCLASS family of products provides
true iCLASS security, the ease of proximity
technology, the power of smart cards and the
confidence of choosing Genuine HID.
SPECIFICATIONS
Part Numbers
Read Range
RMK40 multiCLASS
Magnetic Stripe Reader
with Keypad
RMPK40 multiCLASS
Magnetic Stripe Reader
with Prox and Keypad
RM40 multiCLASS
Magnetic Stripe Reader
RMP40 multiCLASS
Magnetic Stripe Reader
with Prox
6230C (Wiegand)
6238C (Clock-and-Data)
6236C (Wiegand)
6233C (Clock-and-Data)
6220C (Wiegand)
6228C (Clock-and-Data)
6225C (Wiegand)
6223C (Clock-and-Data)
iCLASS Card: Up to 4.0" (10.2 cm)
iCLASS Key/Tag: Up to 1.25" (3.2
cm)
MIFARE/DESFire Card (CSN):
Up to 2" (5.1 cm)
iCLASS Card: Up to 4.0" (10.2 cm)
iCLASS Key/Tag: 1.25" (3.2 cm)
MIFARE/DESFire Card (CSN):
Up to 1.75" (4.5 cm)
HID Prox ISO Card:
Up to 3.25" (8.3 cm)
HID Prox Clamshell Card:
Up to 3.75" (9.5 cm)
HID Prox Keyfob/Tag:
Up to 1.5" (3.8 cm)
iCLASS Card: Up to 4.75" (12.1 cm)
iCLASS Key/Tag: Up to 2.0" (5.1 cm)
MIFARE/DESFire Card (CSN):
Up to 2.5" (6.4 cm)
iCLASS Card: Up to 4.25" (10.8 cm)
iCLASS Key/Tag :
Up to 1.5" (3.8 cm)
MIFARE/DESFire Card (CSN):
Up to 2.0" (5.0 cm)
HID Prox ISO Card:
Up to 3.25" (8.3 cm)
HID Prox Clamshell Card:
Up to 3.75" (9.5 cm)
HID Prox Keyfob/Tag:
Up to 2.0" (5.0 cm)
Two-piece plastic cover/electronics and mounting plate. Mounting plate with built in vertical swipe magnetic reader. Magnetic swipe can be
mounted on left or right of reader. Mounting plate attaches to U.S. back box, 52-60 mm screw hole spacing (vertical or horizontal), or to any flat
surface. Reader cover/electronics secured to mounting plate with security screw. Increase security by replacing mounting plate with built in vertical
swipe magnetic reader with a standard mounting plate after magnetic card migration has complete.
Mounting
Color
Black
Dimensions
4.81" x 4.47" x 1.15" (12.2 cm x 11.4 cm x 2.9 cm)
4.81" x 4.47" x 1.05" (12.2 cm x 11.4 cm x 2.7 cm)
9.7 oz (275 g)
8.8 oz (250 g)
Weight
Power Supply
5-16 VDC, Linear supply recommended
Power Requirements
AVG = 110 mA, PEAK = 169 mA @ 12 VDC
AVG = 90 mA, PEAK = 166 mA @ 12 VDC
Nominal Wattage = 1.32 W
Nominal Wattage = 1.08 W
Operating
Temperature
-31º to 150º F (-35º to 65º C)
Operating Humidity
5% to 95% relative humidity non-condensing
Transmit Frequency
13.56 MHz
13.56 MHz and 125 kHz
13.56 MHz Card
Compatibility
125 kHz Card
Compatibility
N/A
HID Prox and AWID Credentials
Magnetic Card Data
Tracks
13.56 MHz and 125 kHz
N/A
HID Prox and AWID Credentials
1 or 2
Magnetic Card
Speed
8 to 50 inches per second
Magnetic Card Data
Output
All bits Wiegand or Clock-and-Data; Various ABA to Wiegand formats; Supports most Dorado formats1
Cable Distance
Wiegand/Clock-and-Data Interface 500ft (150m) (22AWG)
Termination
Pigtail or Terminal Strip
UL294/cUL2 (US), FCC Certification (US), IC (Canada), CE (EU), C-tick (Australia, New Zealand),
SRRC (China), MIC (Korea), NCC (Taiwan), iDA (Singapore), RoHS
Certifications
Housing Material
UL94 Polycarbonate
Keypad
Yes (4x3)
Family Model
RMK40C
Warranty
No
RMPK40C
RM40C
RMP40C
Warrantied against defects in materials and workmanship for 2 years
1
2
See 13.56 MHz How To Order Guide for more details
UL294/cUL certified for Wiegand interface and outdoor use
North America: +1 949 732 2000
Toll Free: 1 800 237 7769
Europe, Middle East, Africa: +44 (0) 1440 714 850
Asia Pacific: +852 3160 9800
Latin America: +52 55 5081 1650
h idglobal .com
13.56 MHz
iCLASS 15693, Reads Secure HID Access Control Application, All memory sizes
ISO 14443A/14443B US Government FIPS-201 (PIV)
ISO 14443A (MIFARE® and DESFire®) - serial number, ISO 15693 - serial number, ISO 14443B - serial number
© 2012 HID Global Corporation. All rights reserved. HID, the HID logo, multiCLASS, and iCLASS are trademarks or registered trademarks of
HID Global in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered
trademarks of their respective owners.
2012-03-07-hid-multiclass-magstripe-readers-ds-en