SATA PCI Host Adapter
SATA 150 RAID
Easily access external and internal SATA storage
devices.
Supporting both low-profile and regular-size PCI designs, the MANHATTAN® SATA PCI Host
Adapter can upgrade your desktop computer to have four serial ATA RAID channels. The board
provides a 32-bit, 33/66 MHz PCI interface on the host side and fully compliant serial ATA
ports on the device side to access serial ATA storage media such as hard disk drives, zip
drives, CD-ROMs, CD-RWs and DVD-ROMs.
A Wide Range of Options
The SATA Raid PCI Host Adapter comes with regular and low-profile PCI brackets. This allows it to fit into a wide
variety of cases. MANHATTAN also offers a wide variety of setup options. If the BIOS is not configured for
RAID, the SATA Raid PCI Host Adapter will operate as a standard SATA host controller. If RAID is enabled, it
offers a wide range of options, including RAID 0 (Striping), RAID 1 (Mirroring), RAID 0+1 (mirrored-stripping)
and RAID 1+S (Mirrored-Sparing) to improve the data performance and provide data redundancy and
rebuilding.
Lifetime Warranty
Strict manufacturing standards ensure the highest quality in all MANHATTAN products. All items
carry a full Lifetime Warranty — the strongest quality commitment anyone can make.
Model
172592
Model
172592
Features
• RAID Level 0 (striping) increases sustained data transfer rates
• RAID Level 1 (mirroring) places an identical data copy on
another drive
• RAID Level 0+1 (mirrored-striping) offers the best performance
and fault-tolerant data redundancy
• RAID 1+S (mirrored-sparing) can automatically replace the failed
drive and rebuild the system when booting HDD fails
• Independent 256-byte FIFOs per SATA channel for host reads
and writes
• Integrated PCI DMA engines
• 4-pin header on board for LED connection
• Acts as non-RAID when not BIOS configured
• Lifetime Warranty
Specifications
Standards and Certifications
• FCC
• CE
• SATA 1.0a
• PCI 2.2
Ports
• 4 SATA (internal)
• Connection: L-type
• Transfer rate: 1.5 Gbps
General
• Supports Spread Spectrum in receiver
• Supports ATAPI commands
• 48-bit LBA for support of HDD larger than 137 GB
• 4-pin header for LED connection
• Independent 256-byte FIFOs per channel
• Integrated PCI DMA engines
• 32-bit, 33/66MHz PCI support
• Chipset: SiI3114
System Requirements
• Windows 2000/XP/2003/Vista
• Available PCI Card slot
• CD-ROM drive
Package contents
• SATA PCI Host Adapter
• Regular and low-profile brackets
• User manual and driver CD
For more information on MANHATTAN products, consult your
local dealer or visit www.manhattan-products.com.
Copyright © MANHATTAN
All names of products or services mentioned herein are trademarks or registered trademarks of their respective owners. Distribution and reproduction of this document, and use and disclosure of
the contents herein, are prohibited unless specifically authorized.
MH-172592-DS-0109-01