T2 GSM Elderly Alarm System User Manual V1.0

Add to my manuals
15 Pages

advertisement

T2 GSM Elderly Alarm System User Manual V1.0 | Manualzz

T2

GSM Elderly Care Alarm

An Advanced

Programmable

Multifunctional

Elderly Care Alarm

In The Worldwide!

Telecare & Telehealth System

User Manual

Ver 1.0

Date Issued: 2015-05-01

All rights reserved.

King Pigeon Communcation Co.,Ltd

T2 --- GSM Elderly Care Alarm System

Table of contents

1. Product details -----------------------------------------------------------------------3

2.Safety Directions --------------------------------------------------------------------------4

3.Product Schematic ------------------------------------------------------------------------5

4.Easy setting by keypad-------------------------------------------------------------------7

5.Add wireless sensors------------------------------------------------------------------9

6.How T2 works for elderly?----------------------- ------------------------------------------10

7.Setting & Operation by SMS commands -----------------------------------------------12

8.GPRS Parameters --------------------------------------------------------------------------13

9.SMS Content List -----------------------------------------------------------------------14

10.Quick Setting Menu------------------------------------------------------------------------15

11.Warranty --------------------------------------------------------------------------------15

This handbook has been designed as a guide to the installation and operation of K3 Panel.

Statements contained in the handbook are general guidelines only and in no way are designed to supersede the instructions contained with other products.

We recommend that the advice of a registered electrician be sought before any Installation work commences.

The manufacturer, its employees and distributors, accept no liability for any loss or damage including consequential damage due to reliance on any material contained in this handbook.

The manufacturer, its employees and distributors, accept no liability for GSM Network upgrading or SIMCard upgrading due to the technology specifications contained in this handbook.

Page 2 of 15 Ver 1.0

T2 --- GSM Elderly Care Alarm System

1. Product details

The T2 GSM Elderly Care Alarm is an innovation solution of telecare field that especially for the senior, elderly, aged people who living independently.

The T2 can be used as a safety protection, temperature monitoring, daily activities monitoring, bedtime monitoring, fall alarm and emergency call system, away/stay at home monitoring,or like a normal telephone.

8 fast dial buttons which can paste photos, these buttons can be setting as Police, Relatives, Taxi, Firefighting,

Doctor, Neighbor or others for quickly dial out. So easy for Push-to-Talk ! And large keypad can dial to any other phone numbers when needed.

The T2 GSM Elderly Care Alarm also can be used as a telecare system, it can report the elderly daily actions.

Includes elderly away/back home time, remind to take medicine, go to sleep and get up time, if not get up in time then can generate alarm to receivers or central monitoring system (CMS) remotely.

Moreover, T2 can be used as a GSM Alarm system,supports wireless SOS button, wireless fall detectors, wireless carbon monoxide detector, wireless gas leakage detector, wireless water leakage detector, wireless smoke detector, wireless motion detectors and so on. Once the wireless detectors activated, it will generate alarm to receivers or central monitoring system (CMS) remotely.

All of these wireless detectors can provide the safety protections to the senior, elderly, aged people who living alone.

One sensitive thermometer inside,T2 can measure the home temperature and send alert SMS text when temperature exceed high/low threshold.

Features:

Fashion hand free design, large keyboard;

7*24 solution: take care of elderly get up,medical,SOS,fire,smoke,water,gas,sports,bedtime,etc.

Large LCD display current time, temperature, and alarm events;

GSM/GPRS wireless transmission, no distance limitation;

Bedtime/Get up not on time alarm;

Away/Back home time notice;

Supports variety wireless detectors, includes fall detector, CO detector,smoke detectors and so on;

Equips 8 quick dial numbers, and also can dial other numbers by keyboard;

Android app and iOS App can display the bedtime and away/back home trends;

3-Timer for alerting to take medicine or other activaties.

Backup rechargeable battery.

GPRS data transmiite Contact ID protocol data to CMS available.

Page 3 of 15 Ver 1.0

T2 --- GSM Elderly Care Alarm System

Specification and dimensions

GSM Frequency Quad-band 850/900/1800/1900MHz

Wireless zones

16

Wireless Frequency

433.92MHz

Wireless distance Max.100m in open air

Siren Output 12VDC/1A

DC Power supply 9~24VDC/1A

Power consumption 12V input Max. 50mA/Average 25mA

SIM Card Supporting 3V SIM Card

Antenna

50 Ω SMA Antenna interface

Temperature range -20~+60 °C

Humidity range Relative humidity 90%

Backup battery 3.7V/900mAH

Exterior dimension 24.5*16.5*6.6cm (9.6*6.5*2.6 inch)

Net Weight 550g (1.2lb)

Standard Packing List

Main unit * 1

AC/DC Power adaptor *1,

User Manual & PC Software CD x1

Applications

Residential: Home safety alarm, elderly living monitoring.

Business: Aging care, telecare, healthcare,etc.

2.Safety Directions

Optional Accessories :

PIR Motion Sensor,

Door Magnetic contact Sensor,

Smoke detector

Gas leakage detector

Water flood sensor

Safe Startup

Do not use T2 when using GSM equipment is prohibited or might bring disturbance or danger.

Interference

All wireless equipment might interfere network signals of T2 and influence its performance.

Avoid Use at Gas Station

Do not use T2 at a gas station. Power off T2 when it near fuels or chemicals.

Power it off near Blasting Places

Please follow relevant restrictive regulations. Avoid using the device in blasting places.

Reasonable Use

Please install the product at suitable places as described in the product documentation. Avoid signal shielded by covering the mainframe.

Use Qualified Maintenance Service

Maintenance can be carried out only by qualified maintainer.

Page 4 of 15 Ver 1.0

T2 --- GSM Elderly Care Alarm System

3. Products schematic

Front view

Setting Call list Alarm list

Fast dial relatives

Speaker

Keypad

Back/Delete

Medical, Police

Taxi/Cab, Neighbor

Stay at home Away

Answer End/Exit Microphone

Interface

Display

Confirm,Error,Power

Date and Week

GSM Signal

Temperature, Volume,List

Time, and number area

Smoke,Gss, CO alarm Alarm clock

Page 5 of 15 Ver 1.0

T2 --- GSM Elderly Care Alarm System

Typical Status:

Registering,No GSM signal, GSM Signal good,

AC/DC adaptor lost. Power by AC/DC adaptor

SOS alarm(3 icons flash together) Alarm Clock(flash)

On phone call (in or out) Volume adjust (range: 1~5)

List

T2 can record last of 20 alarm events and last of 20 call events(in & out).

Press to view the alarm events.

Press to view call list, and press can call back to this number.

Alarm List (On the 17 th

record, Call list, (On the 19 th

record, zone #3 alarm at 15:19,May 12.) Phone 13510150873 on May 20).

Page 6 of 15 Ver 1.0

T2 --- GSM Elderly Care Alarm System

4.Easy setting

Start:

 Insert mobile SIM card(

GSM850/900/1800/1900MHz

) to the slot.

 Connect the power supply,Switch ON.

for confirm, for mistake reminding on the LCD display when setting.

Confirming T2 SIM Card number:

Setting

8# T2’s SIM CarnumberSetting

T2 will get mobile operator‟s date and time according to the SIM Card number,LCD will correct and display the real date&time after few mins when setting done.If T2 can‟t get date&time automatically, please try to remove or add the country code,like 008613510150873 instead of 13510150873.

For example,setting the T2‟s SIM card (13510150873) number:

Fast dial numbers:

Fast dial buttons position

SettingFast dial buttonPhone numberSetting

For example,setting the Police station number (999):

LCD display:

1 2

3 4

5 6

7 8

Alarm R eceiver’s phone number:

Setting

Receiver’s position(1~5)#Phone number#Function code(0~2) Setting

5 alarm SMS & Call receivers supported, the postion number from 1~5.

Function code:

0: call this number

1: send alert SMS text to this number

2: send alert SMS text and call to this number

For example,setting the 1 st

position number(0086952), this number can receive alert SMS & Call.

Page 7 of 15 Ver 1.0

T2 --- GSM Elderly Care Alarm System

Notice:

Stay/Away,wireless sensor‟s battery low power,T2 back up battery low power,AC/DC power lost/recovery,High/Low temperatuer alarm,Bedtime monitoring SMS send to the 1 st

& 2 nd

receiver only,so the 1 st

& 2 nd

receiver should be mobile phone and select the function code as 1 or 2.

Temperature alarm threshold

Setting6 # high thresholdSetting (Default: High

—99, disable this function.)

Setting7 # low threshold Setting (Default: Low

—00,disable this function)

High/Low threshold value: 2 digits only.

For example,Setting high threshold as 32 degree.

Alarm clocks (1~3)

Setting100#hhmmSetting

Setting200#hhmmSetting

Setting300#hhmmSetting

For example, setting the 1 st

alarm clock at 08:30am.

Delete alarm clock:

Setting100#Setting

Setting200#Setting

Setting300#Setting

Alarm audible time(0~240)

Setting9#audible timeSetting

T2 will make audible alarm and flash on LCD when alarm occurance.Alarm audio sounds 20 seconds and stop 2 seconds inteval,the totally time(0~240 seconds, default:60).

For example, setting the audible alarm as 30 seconds.

White list setting

Whilte list: the numbers of fast dial (1~8) and alarm receivers(1~5).

Setting all numbers can call in to the T2 (default): Setting0#0Setting

Setting white list numbers can call in to the T2 only: Setting0#1Setting

Reset to factory mode

Setting000001#

Caution: The operation will RESET T2 to factory mode! All of your settings will lost.

Page 8 of 15 Ver 1.0

T2 --- GSM Elderly Care Alarm System

5.Add wireless sensors

Add wireless sensors step

Settingzone number(01~16)#zone type(1~6) Trigger the sensorSetting

For example, add one fall detecct sensor to zone #3:

Trigger the sensor

Zone types explaination

1: SOS alarm

2: Smoke alarm

3: Gas alarm

4: CO alarm

5: Watchdog monitoring

6: Bed/Get up time monitoring

Watchdog zone time setting

Two period time monitoring can be setting for a same watchdog zone.

Setting400#Zone number#Start time#End timeSetting (Default 0000#0000, disable.)

Setting500#Zone number#Start time#End timeSetting (Default 0000#0000, disable.)

For example,add one door sensor on the zone #5 (main gate) and setting the time at 07:00~09:30 and

16:00~17:30,if the main gate not opened on the above duration,T2 will send alert SMS text to the 1 st

and

2 nd

receiver.

Bedtime/Get up monitoring zone time setting

T2 can install wireless s ensors to monitor the elderly‟s sleeping(bed)/wake up(get up) time.

Bedtime period: Setting400#Zone number#Start time#End timeSetting

Get up time period: Setting500#Zone number#Start time#End timeSetting

(Default 0000#0000, disable.)

For example, install one PIR sensor on the bed room‟s door frame(Zone #6),setting the bedtime at

21:00~22:30, and get up time at 06:00~08:30,T2 will record the latest movement detection between

21:00~22:30,ie.: at 22:10, then T2 will send notify SMS text “Mom went to bed at 22:10” to the 1 st

receiver.

And if Mom get up and the first time she walk through the door at 07:30am, then T2 will send notify SMS text “Mom got up at 07:30 ” to the 1 st

receiver.

If the PIR sensor didn‟t detect any movement dring 21:00~22:30, and 06:00~08:30,T2 will send alert

SMS text “Mom still not went to bed” at 22:31, and “Mom still not get up” at 08:31 to the 1 st

& 2 nd

receiver.

Notice:

The different between “Watchdog zone” from “Bed/Get up time monitoring zone” is:

“Bedtime/Get up time monitoring zone” will send notify SMS text of the latest sensor’s trigger during the period to the 1st receiver after time out.

Page 9 of 15 Ver 1.0

T2 --- GSM Elderly Care Alarm System

6. How T2 works for elderly?

Push-to-Talk with families

Keep the origin design icons or stick a easy recognized photo on the buttons, just push these buttons then make a phone call with families

Push-to-Ask for help

Keep the origin design icons or stick a easy recognized photo on the buttons, just push these buttons then make a phone call with Doctor,Police station,Taxi/Cab service and neighbor/community service.

SOS alarm when under emergency situation

Make phone call

Push the SOS button for 3 seconds,T2 will send SOS alert SMS text and make a phone call to receivers for asking emergency help.

Other Wireless SOS button or fall detectors optional.

Press the keypad for make a phone call,just like a regular telephone set.

Press for answer the call in, press for end calls.

Press to erase the last number if made mistake.

24hours safety guard

When smoke,gas,CO or water flood detected,T2 will make audible alarm,send alert SMS text and call to the receivers/Call center/Firefighting or other CMS system.

Alarm clocks

T2 will make audible alarm and flash on LCD according to the timing setting.Alarm audio sounds 10 seconds and stop 2 seconds,repeat 5 times or stoped by end button .

Audio volume(1~5) can be adjust by and ,(the same volume for phone call,audible alarms).

Daily life care

T2 will send alert SMS text if no activities detected by PIR/Door sensors during the watchdog time period.

For example,install one door contact sensor on the main gate,setting time period at 16:00~18:00pm,if the main gate not opened during that time,T2 can send alert SMS to receivers.

Page 10 of 15 Ver 1.0

T2 --- GSM Elderly Care Alarm System

Bedtime/Get up care

Under the status, T2 will send notify SMS text of the

“bedtime” and “get up time” to the 1 st receiver.

For exampl e, install one curtain PIR sensor on Mom‟s bed room(door frame),setting the bedtime at

21:00~22:30, and get up time at 06:00~08:30,T2 will record the latest movement detection between

21:00~22:30,let‟s say at 22:10, then T2 will send notify SMS text “My bedtime: 22:10,good nite:)” to the

1 st

receiver at 22:30.

If Mom get up and the first time she walk through the door at 07:30am, T2 will send notify SMS text

Good morning, I get up at 07:30” to the 1 st

receiver at 07:30.

If the PIR sensor didn‟t detect any movement on 21:00~23:00, and 06:00~08:30,T2 will send alert SMS text “I didn't go to sleep yet” at 22:31, and “I didn't get up yet.” at 08:31 to the 1 st

and 2 nd

receiver.

This unique function designed for take care elderly‟s health status on the evening and morning, in case of any unexpected situation, receviers can get notify SMS text and need to take care about

“are there anythin g OK”,”why mom still not get up” or “why she still not go to bed?” etc.

Stay/Away care

Press when away home, T2 will send notify SMS text

I'm leaving home now.” to the 1 st

and 2 nd receiver,to let them know that elderly away home at that time.

T2 will send notify SMS text

I'm at home now

.

” to the 1 st

and 2 nd

receiver when elderly back to home and pressed the button, to let them know that the elderly back home safety.

If the receiver get notify SMS text of “I'm leaving home now.” but didn‟t get SMS text of “I'm at home

now

.

” after few hours,for example:received the SMS text “I'm leaving home now.” at 16:00 but didn‟t received SMS text “I'm at home now

.

” till 22:00,then receivers should call to T2 or mobile numbers to check if elderly forgot press the Stay button or really didn‟t go back yet.

Temperature monitoring

T2 send alert SMS text to receivers when temperature higher/lower than threshold more than 10mins.

Other care

T2 will send alert SMS text to the 1 st

and 2 nd

receivers when AC/DC power lost (more than 30mins) and recovery, back up battery low power,wireless sensor‟s battery low power(if have).

Page 11 of 15 Ver 1.0

T2 --- GSM Elderly Care Alarm System

7. Setting & Operation by SMS commands:

T2 can setting by SMS commands with password protection remotely.

* The SMS commands should with Password, 1234 is the default password on below context,please change it to new password if you had changed already.

* The command body PU,EE,etc must be Caps Lock.

* No space on the SMS commands, the space on command list just for reading purpose.

Change Password

1234PU new password

T2 return: This is the New Password, please remember it carefully.

E.g.:

1234P 6666

for change the new password to 6666.

Modify the Fast dial phone numbers.

1234A position(1~8) T phone number

For example,modify the Policy station‟s number to 999:

E.g.:

1234A 6 T 999

Inquiry fast dial phone number:

1234A

Remove fast dial phone number:

1234A position(1~8)

Modify the Alarm receiver’s phone numbers.

1234B position(1~5) T phone number A function code(0~2)

*Function code: refer to page 7

“Alarm Receiver’s phone number”

For example,modify the

1ST receiver‟s phone number to 0086952,this number can receive SMS and call.

E.g.:

1234B 1 T 0086952 A 2

Inquiry alarm receiver‟s phone number:

1234B

Remove alarm receiver‟s phone number:

1234A position(1~5)

Modify the alarm content of zones.

1234M zone number(00~16) alarm content

E.g.:

1234M

01Smoke Fire alarm!

Page 12 of 15 Ver 1.0

T2 --- GSM Elderly Care Alarm System

Modify the Alarm Clocks.

For example,modify the 1ST alarm clock to 08:30

1234C position(1~3) hhmm

Inquiry alarm clocks:

1234C

Remove alarm clock:

1234C position(1~3)

Inquiry the T2 status.

1234EE

T2 return:

I'm at home; / I„m away; (Elderly at home or away home)

External AC Power OFF/ON (AC power status)

GSM Signal:** (GSM signal range 1~31, lower than 14 means signal weak)

Temp:**degree; (Celsius)

IMEI: ****************

(GSM module‟s IMEI code)

8.GPRS data Parameter Setting

For engineer and remote server system only

Please ignore this part if the total quantity of T2 should me monitoring less than 200pcs

APN(call your mobile operator to ask the Access Point Name, private APN supported)

1234APN apn name#user#password

Eg: 1234APN

everywhere

*

eesecure

*

secure

#

(the example “APN name:everywhere, user: eescure, password: secure” supported by Orange UK)

CMS Server IP address and server port

1234IP server IP address P server port

Eg: 1234IP 175.164.49.20

P 4005

T2 send “

I'm leaving home now.

” through GPRS data to server system when Away button is pressed.

T2 send “

I'm at home now.

” through GPRS data to server system when Stay button is pressed from Away status.

Alarm process:

Alert SMSGPRS data to Server systemAlarm dial

GPRS upload to Server system depends on the alarm events(trigger) automatically,GPRS Data off line when data send complete. T2 can't receive data from server system.

GPRS data following the Contact ID (SIA DC-9) protocol.

Page 13 of 15 Ver 1.0

T2 --- GSM Elderly Care Alarm System

9. SMS Content list

Events

Big SOS button pressed

SOS Help!

I'm leaving home now.

Alert SMS text Description

Zone number: 00

Away button pressed

Stay button pressed

AC/DC power lost

AC/DC power recovery

Wireless zone #1 alarm

Wireless zone #2 alarm

Wireless zone #3 alarm

I'm at home now.

Alert: External AC power lost!

Notice: External AC power recovery!

SOS Help! Fall down detector alarm!

Alarm: Smoke detected!

Alarm: Gas detected!

Alert when AC/DC power lost more than 30mins

T2 back up battery low power

High temeprature alarm

Alert: Main panel's battery low power!

Alert: High temperature alarm!Current Temp: **C

Low temeprature alarm

Alert: Low temperature alarm!Current Temp: **C

Temperature back to normal value

Notice:Temperature back to normal.Current Temp:**C

My bedtime: **:**,good nite:)

Sensor‟s latest trigger time

Bedtime monitoring

I didn't go to sleep yet. If no trigger

Good morning, I get up at **:**

Sensor‟s first trigger time

Get up time monitoring

I didn't get up yet. If no trigger

For EM-90 (*optional)

For SM-100 (*optional)

For GL-100A (*optional)

For CO detector (*optional)

For PIR/Door (*optional)

F or bed/get up…

For WL-100 (*optional)

Wireless zone #4 alarm

Wireless zone #5 alarm

Wireless zone #6 alarm

Alarm: CO detected!

Alert: Watchdog zone!

Alarm: Water flooding!

Wireless zone #7 alarm

Wireless zone #8 alarm

Wireless zone #9 alarm

Wireless zone #10 alarm

Wireless zone #11 alarm

Wireless zone #12 alarm

Wireless zone #13 alarm

SOS Help! Wireless pedant alarm!

SOS Help! Wireless wrist button alarm!

SOS Help! Wireless panic button alarm!

Zone 11 alarm!

Zone 12 alarm!

Zone 13 alarm!

Wireless zone #14 alarm

Wireless zone #15 alarm

Zone 14 alarm!

Zone 15 alarm!

Wireless zone #16 alarm

Zone 16 alarm!

Wireless sensor’s battery low power Alert: Zone xx detector low power!

For EM-60 (*optional)

For EM-70 (*optional)

For EM-100 (*optional)

For other optional sensors

For other optional sensors

For other optional sensors

For other optional sensors

For other optional sensors

For other optional sensors

Reserve function.

Page 14 of 15 Ver 1.0

T2 --- GSM Elderly Care Alarm System

10. Quick Setting Menu

Function Example

Confirming T2 SIM Card number

T2 SIM card number:1351015

Fast dial number

Alarm Receiver‟s phione number

Setting the Police station number (999)

Setting the 1 st

position receiver number: 0086952, can receive alarm

SMS and Call

High Temperature alarm

Setting high threshold as 32 degree.

Low Temeprature alarm

Setting high threshold as 20 degree.

Alarm Clocks Setting the 1 st

alarm clock at 08:30am

Buttons

Alarm audible time Setting audible alarm 30 seconds

White list

Add sensors

Setting all numbers can call in to the

T2 (default)

Setting white list numbers can call in to the T2 only add one smoke sensor to zone #3

Trigger the sensor

Watchdog zone time 1

Watchdog zone time 2

Bedtime

Get up time

Setting monitoring period at

0700~0930am for zone 5

Setting monitoring period at

1600~1730pm for zone 5

Setting bedtime period at

21:00~22:30 for zone 6

Setting get up time period at

06:00~08:30 for zone 6

11. Warranty

1) This system is warranted to be free of defects in material and workmanship for one year.

2) This warranty does not extend to any defect, malfunction or failure caused by abuse or misuse by the

Operating Instructions. In no event shall the manufacturer be liable for any alarm system altered by purchasers. www.GsmAlarmSystem.com

Page 15 of 15 Ver 1.0

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals