TWISTED PAIR TRANSMISION SYSTEM

HD-TVI to HDMI/VGA/Composite Video Converter
ITEM NO.: AD001TVI
AD001-TVI converts HD-TVI signal to HDMI, VGA, Composite Video or HD-TVI loop out which
enabling users to use cost effective HDMI/VGA/BNC monitor to display HD-TVI camera. It
also supports 3 different output displays at same time. It is perfect solution when user wants
to display HD-TVI camera to different monitor without HD-TVI DVR.
The 2 IN/OUT function could works with 3 different function selections: CVBS output or
HD-TVI loop out as a distributor function or as second HD-TVI input could be works as a
switcher function with PIP feature to display 2 sources in one monitor.
Features:











Converts HD-TVI signal to HDMI, VGA, Composite Video or HD-TVI loop out.
Input support: HD-TVI 720p@25/30 and HD-TVI 720@50/60hz, 1080p@25/30Hz
Output support: HDMI, VGA, Composite Video or HD-TVI loop out.
3 outputs could be display simultaneously.
BNC connector function selection: HD-TVI loop output, Composite Video output or as
second HD-TVI input.
Built in PIP (display two input picture) under dual HD-TVI input mode.
HDMI/VGA output support: 480p,576p,720p,1080i,1080p
Composite video output support NTSC, PAL.
Composite output built in underscan adjustment. (allow the edges of the picture fit well)
Built in OSD to display input/output setting.
HDMI and DVI compliant. (support DVI monitor by a HDMI to DVI adaptor)
Installation:
HD-TVI Loopout Mode:
* 3 outputs: HDMI, VGA, HD-TVI loop output as a distributor.
CVBS Output Mode:
* 3 outputs: HDMI, VGA, CVBS could be display simultaneously.
1
HD-TVI Input Mode:
* Allow HD-TVI camera 2 inputs with 2 outputs: HDMI, VGA as a switcher.
Panel View:
AD001TVI
DC 12V
HDMI OUT
VGA OUT
1 IN
2 IN/OUT
DC 12V power terminal
HDMI output interface
VGA output interface
1st source input interface
Multiple function source input/output interface
LED Indication:
DC JACK LED:
Green P
Blue S
Red H
Power ON
Input 1 signal received
HDMI output linking
2 IN/OUT Connector LED:(BNC)
Green L
Under LOOPOUT mode
Blue S
Input 2 signal received
Red C
CVBS OUT mode
2
Switch, Button Function:
DIP Switch 1 : LOOPOUT / CVBS OUT Function Selection
DIP Switch 1 ↑ (LOOPOUT)
2 IN/OUT connector setting as LOOPOUT mode
1 IN
2 IN / OUT
HDMI / VGA OUT
Input1 = HD-TVI 1080p@30
Loopout= HD-TVI 1080p@30
Output = 1080p@60
Button for resolution switching, press  button to decrease the resolution, press  button to
increase output resolution
Resolution for switch sequence will be follow as below:
480p  576p  720p@60  720p@50  1080i@60  1080i@50  1080p@60 1080p@50
NTSC (CVBS) output resolution setting on 480p, 720p@60, 1080i@60, 1080p@60
PAL (CVBS) output resolution setting on 576p, 720p@50,1080i@50, 1080p@50
DIP Switch 1 ↓ (CVBS OUT)
2 IN/OUT connector setting as CVBS mode
1 IN
2 IN / OUT
HDMI / VGA OUT
Input1 = HD-TVI 1080p@30
CVBS
= NTSC Underscan 20%
Output = 1080p@60
Button for underscan adjustment, press  decrease CVBS OUT underscan, press  enlarge
CVBS OUT underscan
CVBS underscan adjustment is to avoid overscan situation on CRT screen (Overscan is the
situation in which not all of a televised image is present on a viewing screen) which cause
picture enlarge and could not see the edge of screen. The reduce screen adjustment range
could be from minimum 0% up to 20% based on each time 2% reduced.
DIP Switch 2 : INPUT / OUTPUT Mode Selection
DIP Switch 2 ↑ (Output Mode)
2 IN/OUT connector setting as output mode, 2 IN/OUT connector function follow
by DIP Switch 1 selection.
DIP Switch 2 ↓ (Input Mode)
2 IN/OUT connector setting as input mode, 2 IN/OUT connector function as input
2, DIP Switch 1 setting will be ignored.
3
*Current input display
1 IN
2 IN / OUT
HDMI / VGA OUT
*Input1 = HD-TVI 1080p@30
Input2 = HD-TVI 720p@30
Output = 1080p@60
Button as input selection, press  to display Input 1 picture, press  to display input 2
picture, the current input display will be add「*」 symbol marked.
To press the  two buttons together could switch the SD aspect ratio; the switching aspect
ratio is 16:9 or 4:3. When the source is NTSC or PAL will affects HDMI and VGA output,
please follow the source to make adjustment.
If the input is 960H video format, then make
the aspect ratio setting at 16:9. For HD-TVI input aspect ratio is fixed at 16:9, this
setting is not affected.
DIP Switch 3 : PIP Mode
DIP Switch 3 ↓ (PIP Mode)
This function only activated on DIP Switch 2 ↓
PIP
PIP
PRESS
PRESS
PIP
PIP
Button as PIP sub-screen display position, press Counter-Clockwise to switch, press
Clockwise switch
When press two buttons together, two inputs can be switched between the main
picture and sub picture.
DIP Switch 4 : PIP Dimension Setting
DIP Switch 4 ↓ (Adjust PIP Dimension)
This function only activated on DIP Switch 2 and DIP Switch 3 both at ↓
position.
PIP
Button as PIP sub-screen dimension setting, press  to decrease PIP sub-screen dimension,
press  button to enlarge PIP sub-screen dimension.
Restore Factory Default
Unplug power and hold to press button for 5 seconds, then release button.
4
Caution
1.
Before switching HDMI/VGA monitor, please make sure your monitor supported
resolution. If the monitor not supports the resolution, then there will be no output.
2.
If the PIP sub-screen from SD source, then the sub-screen picture will comes black edge.
3.
This product TVI input and TVI loop out do not support audio and data transmission.
Specification:
ITEM NO
Video Input
Video Output
Input Connector
Output Connector
Switch
Power Supply
Power Consumption
Temperature
Dimension
(mm)
Weight (g)
AD001TVI
HD-TVI 720p@25/30/50/60Hz、1080p@25/30Hz、
HDMI & VGA (480p、576p、720p/50/60、1080i/50/60、1080p/50/60)、
CVBS (NTSC、PAL)
BNC (75Ω 1Vpp)
HDMI Type-A、D-SUB 15、BNC (75Ω 1Vpp)
DIP Switch x 1、Tact Switch x 2
12V 500mA
350mA (Max) 4-5 Watts
Operation: 0 to 55℃, Storage: -20 to 85℃, Humidity: up to 95%
88 * 130 * 30
275
Rev. B
5