LNC3 - Hubbell Outdoor Lighting

LNC3
LLEEDD WA
WALLLLPAC
PACKKSS
Midsized LED Wallpack – Zero Uplight
The midsized LED LNC3 is designed for perimeter
illumination for safety, security and identity. No
uplight and lower glare lenses offer neighbor
friendly lighting at typical mounting heights
of 8-20’. Units have protective polyester finish
for long lasting appearance. Ideal for schools,
factories, hospitals, warehouses and retail applications. Energy efficient LEDs provide up to
70% energy savings with little to no maintenance
when compared to traditional light sources.
24L with diffuser
Occupancy Sensor
COB luminaire
*3000K and warmer CCTs only
STOCK
Die-cast aluminum housing protects components
and provides an architectural appearance. Casting thermally conducts LED heat to optimize
performance and long life. Powder paint finish
provides durability in outdoor environments.
Quick-mount adapter with gasket seal provides
easy installation to wall or to recessed junction
ORDERING INFORMATION
CATALOG NUMBER
DESCRIPTION
LNC3-2L4K-075
LNC3-2L4K-105
LNC3-2L5K-105
LNC3-2L4K-105-7PR
LNC3-2L4K-105-SCP
2 LED - 60W Configuration, 4000K, Dark Bronze
2 LED - 90W Configuration, 4000K, Dark Bronze
2 LED - 90W Configuration, 5000K, Dark Bronze
2 LED - 90W Configuration, 4000K, Dark Bronze, 7-Pin
2 LED – 90W Configuration, 4000K, Dark Bronze, SCP
MADE-TO-ORDER
box (4” square junction box). Fixture attaches by
two Allen-head hidden fasteners for tamper resistance. Designed for direct j-box mount or conduit
feed on all four sides in single SKU.
•120-277, 347 and 480 voltage, 50/60Hz,
• 0-10V dimming drivers standard
•IP-65 rated assembly
•Surge protection – 10kA
•2 and 24 LED configurations available, see
specification sheet for electrical and photometric
data
•Zero uplight distributions using chip on board
LEDs or individual acrylic LED optics
•7-pin photo-receptacle available for twist lock
photocell and controls by others
• Frosted acrylic diffuser available for reduced
glare or inverted/up mounting (factory install
only)
# OF DRIVERS @ WEIGHTS
DRIVE CURRENT LBS. (KBS)
1 @ 750mA
1 @ 1050mA
1 @ 1050mA
120-277
15.0 (6.8)
1 @ 1050mA
1 @ 1050mA
DISTRIBUTION WATTAGE LUMENS LPW VOLTAGE
Type IV
62.0
87.4
87.4
87.4
87.4
5,857
7,721
7,288
7,721
7,721
94.8
86.1
82.0
86.1
86.1
ORDERING INFORMATION - CONFIGURABLE (SEE SPEC SHEET FOR PERFORMANCE INFORMATION AND DETAILS)
LNC3
SERIES
CCT
LNC3 Medium
3K 3000K
LitepakWallpack
IES DISTRIBUTION
2 Type II
4K 4000K
3 Type III
5K 5000K
NUMBER OF LEDS
24L 24LEDs
DRIVE CURRENT
4 Type IV
035 350mA (28w)
VOLTAGE
FINISH
U 120v-277v
DB Bronze
1 120v1
BL Black
2 208v1
WH White
3 240v1
GR Gray
SCP3,4 Programmable
4 277v1
PS Plati-
SWP1,7 SiteSync wireless
5 480v
050 500mA (41w)
F 347v
075 750mA (60w)
CONTROL OPTIONS
OPTIONS
F1 Fusing (must
PCU Universal button PC
specify voltage per
footnote)
CS Comfort shield
CSU2 Comfort shield up
position
7PR6 7-pin receptacle
occupancy sensor
num
CC Custom
Color
SWPM1,4,7,8
105 500mA (83w)
E1,5
pre-commisioned
SiteSync wireless
EH1,5
pre-commisioned w/
occupancy sensor
Battery backup 0oC
Battery backup with
heater rated for
-30o C
1
Specify voltage for voltage specific option (battery backup 120 or 277V only, SiteSync 120, 277 or 347V only)
Factory install only. Not available with SCP or SWPM sensor/control options
Must order minimum of one remote control to program dimming settings, 0-10V fully adjustable dimming with automatic daylight calibration and different time delay settings, 120-277V only.
4
PCU option not applicable, included in sensor
5
350mA, 500mA & 750mA version only. Not available with SWP or SWPM control options.
6
Accepts standard 3, 5, and 7-Pin ANSI controls (by others). Not available with PCU, SWP or SWPM control options
7
Must specify group and zone information at time or order. See www.hubbelllighting.com/products/sitesync for further details.
8
Specify time delay; dimming level and mounting height
2
3
CATALOG NUMBER
DESCRIPTION
LNC3-CS
Frosted acrylic diffuser (comfort shield), improves uniformity with only 20% lumen reduction
SCP-REMOTE2*
Remote control for SCP option. Order at least one per project to program and control
SWUSB**
SiteSync loaded on USB flash drive (Windows based only)
SWTAB**
SiteSync Windows Tablet
SWBRG+
SiteSync Wireless Bridge Node
LNC3
* Must order minimum of one remote control to program dimming settings, 0-10V fully adjustable dimming with automatic daylight calibration and different time delay settings, 120V or 277V only
**When ordering with SiteSync, one of the following interface options must be chosen and ordered separately. Each option contains the SiteSync License, GUI and Bridge Node.
+ If needed, an additional Bridge Node can be ordered.
DIMENSIONS
A
C
D
E
Weight
12.9”10.1” 9.6” 5.8” 7.3”
15 lbs. 327 mm 257 mm 243 mm 146 mm 185 mm 6.8 kg
188
WITHOUT DIFFUSER
(Comfort Shield)
A
17.2”
(436mm)
B
A
17.2”
(436mm)
Weight w/BBU
16 lbs.
7.3 kg
10.5”
(266mm)
9.9”
(251mm)
WITH DIFFUSER
(Comfort Shield)
B
C
D
10.5”
(266mm)
B
6.5”
(165mm)
E
C
Visit www.hubbelloutdoor.com/products
for up-to-date availability information
9.9”
(251mm)
8.9”
(226mm)