MP5010 datasheet_EN_20161006.eps

MP5010
Smartphone Connectivity Test Station
Product Brochure
MP5010
Smartphone Connectivity Test Station
Features
1. Software Defined Radio(SDR) architecture with VSG/VSA in one box
2. Support 802.11ac, 802.11a/b/g/n standards
3. Support Bluetooth V1.x/V2.x/V3.x EDR/V4.x BLE
4. Support up to 8 channel GPS simulator
5. Signal measurement engine in box
6. User friendly GUI for R&D/QA applications
7. API for production automation programming
8. Turn-key production automation software support upon request
USB2.0
MP5010 Smartphone Connectivity Test Station
GPS
Power
JTAG A
AC Power XXV
JTAG B
Mechanical
Dimensions : L:480mm X W:425mm X H:89mm
Weight : 12Kg
MP5010
Smartphone Connectivity Test Station
MP5010
MP5010 General Technical Specifications
>> RF Analyzer
>> RF Generator
Parameter
Specifications
Parameter
Specifications
Input Frequency Range
2150~2600 MHz, 4900~6000 MHz
optional 300KHz~6GHz full band
Output Frequency Range
4900~6000 MHz, 2150~2600 MHz
optional 300KHz~6GHz full band
RF Port number
2 Ports
IF bandwidth
120 MHz
Max Output power@ CW
+10 dBm @ 2150~2600 MHz
+/-0.75 dB (+/- 0.5 dB Typ)
IF bandwidth
120 MHz
Max input power
+30 dBm peak, +20 dBm average
Power Accuracy@(0 to -95 dBm)
Input power accuracy
+/-0.75 dB (+/- 0.5 dB Typ)
+/-1.0 dB@ 0 ℃ ~ 50℃
Phase Noise
@(+20 to -75 dBm)
Phase Noise
+7 dBm @ 4900 ~ 6000 MHz
+/-1.0 dB @ 0 ℃ ~ 50 ℃
Phase noise < -100 dBc: 1 KHz offset
@ 2.4 GHz
Phase noise < -95 dBc: 1 KHz offset
@ 5.8 GHz
Phase noise < -100dBc: 1 KHz offset
@2.4 GHz
Phase noise < -95dBc: 1 KHz offset
@5.8 GHz
LO leakage(DC offset)
< - 50 dBc @ 2.4 GHz, -10 dBm
LO Leakage (after self-calibration) < -50 dBc
@after self-calibration
< - 50 dBc @ 5.8 GHz, -10 dBm
sideband image (IQ-imbalance)
@after self-calibration
sideband image (IQ-imbalance)
@after self-calibration
< -50 dBc @ 2.4 GHz, -10 dBm
< -50 dBc @ 5.8 GHz, -10 dBm
Third order input inter-modulation < -70dBc@-10 dBm
distortion(IMD3)
Input Return loss
> 10 dB 2150~2600 MHz
> 12 dB 4900~6000 MHz
Third order inter -modulation
<-60dBc@-10dBm(two -13dBm Tone)
ADC resolution
16 Bits
DAC resolution
16 Bits
Sample rate
160 MS/s
Sample rate
960 MS/s
Initial achievable accuracy
+/-50 ppb maximum (OCXO)
@25 ℃, after 60 minutes warm up
Initial achievable accuracy
+/- 50 ppb maximum (OCXO)
@ 25 ℃, after 60 minutes warm up
Temperature stability
+/-20 ppb maximum(OCXO)
@0 ℃ ~50 ℃
Temperature stability
Aging
Aging
Operating Temperature
+/-1 ppb / day maximum (OCXO)
+/-100 ppb / yr maximum (OCXO)
0 ℃ to 50 ℃
+/- 20 ppb maximum (OCXO)
@ 0 ℃ ~ 50 ℃
+/-1 ppb / day maximum (OCXO)
+/-100 ppb / yr maximum (OCXO)
Operating Temperature
0 ℃ to 50 ℃
Operating Voltage
100 V to 240 V
Operating Voltage
100 V to 240 V
Warm-up time
> 30 minute
Warm-up time
> 30 minute
<-50dBc @ 2.4GHz, -10dBm
<-50dBc @ 5.8GHz, -10dBm
distortion(IMD3)
Return loss
> 10 dB 2150 ~ 2600 MHz
> 12 dB 4900 ~ 6000 MHz
* Test condition Temperature : 15 ℃ ~ 35℃
Voltage : 100 V to 240 V
Frequency Characteristics
RF Output Characteristics
Overload protection on RF output
Frequency Range
1575.42 MHz
Normal output level
-90 dBm to -160 dBm
Maximum reverse RF power
1 Watt maximum
Warm-up time (typical)
30 minutes
± 25 VDC
Frequency Accuracy
± 100 ppb maximum
-31.5 dB to 0 dB (refer to
normal output level)
Maximum DC input
Temperature stability
± 100 ppb maximum
-90 dBm to -145 dBm in
Aging (Per year)
± 100 ppb maximum
Aging (Per day)
± 1 ppb maximum
Channel Attenuation range
Power level range
Channels
1 dB step,
Calibration
Calibration
1 year
-145 dBm to -160 dBm in
Environmental
0.5 dB step.
Operating temperature
0 to 50 ℃
Number
1CH, Opt : 8CH
Amplitude Resolution
1 dB step
Relative Humidity
10 % to 90 %
Navigation data
GPS C/A @ 1.023 MHz
with 50 bps
Amplitude Accuracy
< ±1 dB
Storage temperature
-20 to 70 ℃
Modulation
BPSK
Output Impedance
50 Ω
Relative Humidity
5 % to 95 %
Doppler Shift
± 30 KHz (1 CH option)
Spectral purity
Phase Noise @
1 KHz offset
< -80 dBc/Hz
Voltage Standing Wave Ratio
Harmonic
< -70 dBc
1575.42 MHz
< 1.2
MP5010
Smartphone Connectivity Test Station
The MP5010 deploys state-of-the-art Software Designed Radio (SDR) architecture that consists of full
extendibility to all current and future Wifi / Bluetooth/GPS standards. By upgrading firmware and hardware,
it will be capable to support LTE and other wireless standards in the future.
The MP5010 contains high quality VSA (Vector Signal Analyzer) & VSG (Vector Signal Generator) to provide a
complete and versatile test environment. A highly integrated GUI is both intuitive and user-friendly which
can run simple test of wi-fi/ Bluetooth/GPS signal within few clicks. Supported measurement items include
EVM, power, frequency error, IQ imbalance, 20dB Bandwidth, FM Demodulator Output, etc.
The MP5010 comes fully programmed test waveforms for wi-fi 802.11a/b/g/n/ac & Bluetooth V.1.x/2.x/3.x
EDR/4.x BLE & 8 channel GPS simulator which allows immediate testing for DUTs. Moreover, a built-in
waveform generator utility let users being to establish arbitrary Wi-Fi/Bluetooth testing signals& Set GPS
signal location point arbitrarily. Automatic mass production turnkey software is also available upon request.
The MP5010 support up to 8 channel GPS simulator and allow to create arbitrary GPS location signal.
Furthermore, it provides adjustable output power level for each every satellite.
atellite.
MP5010
Smartphone Connectivity Test Station
MP5010
MP5010 R&D / QA Graphic Program
MP5010 Full Test Setup for R&D/QA
MP5010 Smartphone
phone Connectivity Test Station
Customer PC
Windows Remote Desktop
Ethernet Cable
WiFi / Bluetooth / GPS signal
RF cable
DUT
DUT control
USB, UART, LPT, miniPCIe,
SDIO, Ethernet…
GUI application runs on the MP5010 Tester
Manage the GUI application thru Windows Remote Desktop
No need to install additional software package into your PC/NB
MP5010 Simple Test Setup for R&D/QA
MP5010 Smartphone
Connectivity Test Station
Customer PC
WiFi / Bluetooth / GPS signal
RF cable
GUI application runs on the MP5010 Tester
Manage MP5010 as a PC
DUT
DUT control
USB, UART, LPT, miniPCIe,
SDIO, Ethernet…
MP5010
Smartphone Connectivity Test Station
MP5010 GUI Outlook (Wi-Fi)
MP5010 GUI Outlook (Bluetooth)
MP5010
MP5010 Automated Test Setup for Mass-Production
MP5010 Smartphone Connectivity
y Test Station
St
Customer PC
SCPI commands
Ethernet Cable
WiFi / Bluetooth / GPS signal
RF cable
DUT
VSA/VSG engines run on the MP5010 Tester
Mass-production software runs on the customer’s PC
MP5010 Automated Mass-Production Turnkey Software
DUT control
USB, UART, LPT, miniPCIe,
SDIO, Ethernet…
MP5010
Smartphone Connectivity Test Station
MP5010 GUI Outlook(GPS), 1CH
MP5010
Smartphone Connectivity Test Station
MP5010 GUI Outlook(GPS), Opt : 8CH
Arbitrary GPS Location Setting, Opt : 8CH
MP5010
Copyright 2007 ADIVIC Technology Corporation. All rights reserved.
All company and product names are trademarks or registered trademarks of their respective manufactures.
ADIVIC Technology Corporation reserves the right to change without notice
www.adivic.com
6F., No.345, Xinhu 2nd Rd., Neihu Dist., Taipei City 114, Taiwan
TEL : +886 2 2791 1718 FAX : +886 2 2791 1887 e-mail : info@adivic.com
Download PDF
Similar pages