View Manual - PLAYMATE Tennis Ball Machine

Copyright by METALTEK
All rights reserved. This document is supplied to the user with the understanding
that no part of the contents may be reproduced or transmitted in any form or by
any means without the written permission of METALTEK.
METALTEK has attempted to insure that the information included in this
document was accurate and correct at the time of printing. METALTEK cannot be
held accountable for typographical errors or mistakes. The information in this
document is subject to change without notice.
“Made for iPod” and ”Made for iPhone” mean that an electronic accessory has
been designed to connect specifically to iPod or iPhone respectively, and has
been certified by the developer to meet Apple performance standards. Apple is
not responsible for the operation of this device or its compliance with safety and
regulatory standards. Please note that the use of this accessory with iPod or
iPhone may affect wireless performance.
iPhone and iPod touch are trademarks of Apple Inc., registered in the U.S. and
other countries. App Store is a service mark of Apple Inc.
Information in this document is subject to change without notice and does not
represent a commitment on the part of METALTEK.
METALTEK provides this document “as is”, without warranty of any kind, either
expressed or implied, including, but not limited to, the particular purpose.
METALTEK reserves the right to make improvements and/or changes to this
manual or the product(s) described herein at any time.
Information provided in this manual is intended to be accurate and reliable.
However, METALTEK assumes no responsibility for its use, or any infringements
on the rights of fourth parties that may result from its use.
This manual could include unintentional technical or typographical errors.
Changes are periodically made to the information herein, with the changes
incorporated into new editions of the publication.
Preparing the Ball Machine
Your new iPLAYMATE Tennis receiver should be ready for use in only a few
minutes by completing the following easy steps.
1. HANG IT – Hang the iPLAYMATE Tennis
receiver onto the hopper. As an option,
you can use the included velcro to mount
it more securely.
PLUG IN THE CORD – Plug one end of
the included retractable cable into the
iPLAYMATE Tennis receiver. Plug the other
end of the cable into the port next to the
power switch on the ball machine.
Although this cable looks like a standard
coiled telephone cable, it is NOT. Please
only use the cable included with the
iPLAYMATE Tennis receiver.
TURN ON THE BALL MACHINE – Plug in the ball machine and turn its
power switch to the ON position.
Rev B
The App
Download the Like My Drill app on your iPod touch® or iPhone® in order to
load drills onto or control your ball machine.
DOWNLOAD THE APP – Go to the App StoreSM on
your iPod touch or iPhone and purchase and
download the Like My Drill app.
REGISTER – Go to and click on Sign
Up or tap the Sign Up button in the Like My Drill app.
CHECK EMAIL – Go to your email and look for a PLAYMATE Tennis Drill
Community email. Inside this email is a link to Complete Registration. Click
on the link to automatically complete your registrati
SIGN IN – Start the Like My
Drill app on your iPod touch or
iPhone. Enter your email address
for Username and your selected
password for Password.
For instructions and info about using Like My Drill, visit:
Rev B
This device contains
IC: 5325A-0925
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions;
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Rev B
Download PDF
Similar pages