Overview 8 Port Entry-level Unmanaged DIN-Rail Switches

Industrial Ethernet Solutions
Opal8
8 Port Entry-level Unmanaged
DIN-Rail Switches
2 Fast Ethernet fiber/RJ45 optional ports, 6 10/100Base-T(X)
ports
●● Both standard and wide operating temperature models are
available
●● IP30 protection class
●● UL508, Class I Div 2, ATEX Zone 2, IECEx, CE, FCC
●●
Overview
LED
Opal8 unmanaged 8-port switch is specially designed for automation
control applications. It is equipped with two fast Ethernet fiber/RJ45
optional ports and 6 10/100Base-TX RJ45 ports. Opal8 supports SC/
ST/SFP type fiber ports, redundant power inputs, metal housing with
IP30 protection class, thus ensuring fast and reliable data transmission
in harsh industrial environments. Opal8 provides both standard (-10
to 60°C) operating temperature range model and wide (-40 to 75°C)
operating temperature range models to meet different needs of
applications.
Technical Specification
Technical Parameters
Standard
▼▼ IEEE 802.3i (10Base-T)
▼▼ IEEE 802.3u (100Base-TX and 100Base-FX)
Switch Properties
MAC Table
Packet Buffer
Packet Forwarding Rate
Switching Delay
2K
1Mbit
1.2Mpps
<10μs
Interface
Fast Ethernet Port
▼▼ 100Base-FX, SM/MM, SC/ST connector
▼▼ 100Base-X, SFP slot
▼▼ 10/100Base-T(X), RJ45 port
118 www.kyland.com
LEDs on Front Panel Power LED: PWR1, PWR2
Interface LED: Link/ACT, Speed (RJ45 port); Link/ACT (Fiber port)
DIP-Switch
Enable/Disable broadcast storm protection
Power Requirements
Power Input
12-48VDC/18-30VAC
Power Terminal ▼▼ 4-pin 5.08mm-spacing plug-in terminal block
Power Consumption
<4.6W
Overload Protection
Support
Reverse Protection
Support
Redundancy Protection Support
Physical Characteristics
HousingMetal
Cooling
Natural convection, fanless
Protection Class
IP30
Dimension
46mm×115mm×68mm(W×H×D)
Weight0.32Kg
Mounting
DIN-Rail or Panel Mounting
Environmental Limits
Operating Temperature
▼▼ -10°C to +60°C (Opal8-E)
▼▼ -40°C to +75°C
Storage Temperature
Ambient Relative Humidity
-40°C to +85°C
5-95% (non-condensing)
Version: V1.11
6
MTBF
Warranty 4,044,813 hrs
5 years
Approvals
UL508,Class I Div 2, ATEX Zone 2, IECEx, CE, FCC
Industrial Standard
>
EMI
▼▼ FCC CFR47 Part 15,EN55022/CISPR22,Class A
EMS
▼▼ IEC61000-4-2(ESD): ±6kV (contact), ±8kV (air)
▼▼ IEC61000-4-3(RS): 10V/m (80MHz–2GHz)
▼▼ IEC61000-4-4(EFT): Power Port: ±2kV; Data Port: ±1kV
▼▼ IEC61000-4-5(Surge): Power Port: ±1kV/DM, ±2kV/CM; Data Port: ±1kV
▼▼ IEC61000-4-6(CS): 10V (150kHz –80MHz)
Machinery ▼▼ IEC60068-2-6 (Vibration)
▼▼ IEC60068-2-27 (Shock)
▼▼ IEC60068-2-32 (Free Fall)
Un-m anaged Ethe rn e t Swi tche s
Ordering Information
Opal8-X-Ports-Connector-PS
XO
perating temperature range
E
-10
-+60
operating temperature
None
-40
-+75
operating temperature
Ports
8T
8 10/100Base-T(X) RJ45 ports
1S7T
1
10/100Base-T(X) RJ45 ports
1M7T
1
10/100Base-T(X) RJ45 ports
1SFP7T
1 100Base-X, SFP slot; 7 10/100Base-T(X) RJ45 ports
2S6T
2
10/100Base-T(X) RJ45 ports
2M6T
2
10/100Base-T(X) RJ45 ports
2SFP6T
2 100Base-X, SFP slots; 6 10/100Base-T(X) RJ45 ports
Connector
SC05
SC connector, multi-mode, 1310nm, 5km
ST05
ST connector, multi-mode, 1310nm, 5km
SC40
SC connector, single-mode, 1310nm, 40km
ST40
ST connector, single-mode, 1310nm, 40km
SC60
SC connector, single-mode, 1310nm, 60km
SC80
SC connector, single-mode, 1550nm, 80km
None
PS
LV-LV
Industrial Ethernet Solutions
Mechanical Drawing
Warranty
12-48VDC/18-30VAC, redundant power inputs
Accessories
Model
Description
100Base-X SFP module
Please refer to the 100Base-X SFP module ordering list
DT-BGAZ-10
Panel for Panel mounting
DT-FCZ-RJ45-01
Dustproof cover for RJ45 port
www.kyland.com 119
Download PDF
Similar pages