NetworkAV™ H.264 HDMI® Transmitter over IP w/ POE

NetworkAV™ H.264
HDMI® Transmitter
over IP w/ POE
& RS-232
Send HDMI® Audio & Video over
an Ethernet network to multiple
screens
MPN: EXT-AVIPH264TX
FEATURES
The KanexPro EXT-AVIPH264TX is an AV
•
Encode and extend pure 1080p resolutions up to 394’ / 120 meters
over IP transmitter with an HDMI input
•
Features real-time AV coding and decoding to broadcast 1080p
and Ethernet out which uses advanced
•
H.264 Compression technology
H.264 compression algorithm to transmit
•
Can be used with DVI connection
full HD 1080p from HDMI based sources
•
Supports one to many, many to many and point to point broadcasting
with less bandwidth over LAN network.
•
Dual power input: 802.3af compliant w/ POE & DC 5V
•
(No need power supply when connecting with POE Switch)
•
Can be cascaded to multiple AV over IP Extenders
•
Support LPCM audio format
•
Smart IP Address Setting: Dynamic Host Configuration Protocol (DHCP)
•
Wide-band IR pass through to control the source (38khz to 56khz)
•
By pass 2 - way UART/RS232 (Up to 115200), use remote controller to select
8 group Baud rate
•
Support one to one, one to many, many to one, many to many modes, with large cascading
It supports PoE (power over Ethernet)
with distances over a single CATx up
to 394 ft. (120m) delivering one to one,
one to many and many to many over the
Ethernet switch.
Applications:
Ideal for digital signage and networked
AV applications where full HD 1080p can
be passed over IP network delivering full
audio, video, power, data and control
using a single Ethernet cable.
SPECIFICATIONS
Performance
• Protocol: H.264 encoder over TCP/IP
• Supported Video formats: 480i/480p/576i/576p/720p/1080i/1080p@60HZ
• Supported Audio formats: LPCM, Audio sampling rate 48KHz
• Streaming Bit Rate: 15Mbps
• HDCP Compliant
• IR Frequency 38 -56 KHz
• RS232 Baud rate: Default 2400bps, total 8 options
IP setting & Group ID settings
Default IP:
• TX: 192.168.1.11
• RX: 192.168.1.12
• Group ID Group 00 ~ group 63
• Request for Switch/Router Support: IGMP, supports DHCP
Connectors on Transmitter
• Input 1xHDMI Female port
• Output 1x RJ45 output, 1x HDMI looping output
• RS232 Phoenix RS232 port IR IR TX port (Support 38K-56KHz)
1405 Pioneer Street, Brea, CA 92821 | 888.975.1368 | sales@kanexpro.com | kanexpro.com
VESA Resolutions:
• IR Ext port (Support 38KHz)
Connectors on Receiver
Frequency
• Input 1xRJ45 input
Resolution
• Output 1x HDMI Female port looping output
576i
• RS232 Phoenix RS232 port
• IR IR RX port (Support 38K-56KHz)
576P
• IR Ext port (Support 38KHz)
Environmental & Power RequirementsEnvironment
50Hz
720P
• Operating temperature: -5 to +35 C (+23 to +95 F)
• Operating Humidity Range: 5 to 90%RH (No Condensation)
1080P
• Power supply: DC 5V 1A
1080i
• Power consumption: Max 3 watts
Physical Dimensions:
480i
• Tx:119x79.5x28mm
• Rx: 119x79.5x28mm
480P
• Net Weight TX: 0.28Kg RX:0.28Kg
60Hz/59.94Hz
Supported Input Resolutions:
Frequency
50Hz
720P
1080P
Resolution
576i
30Hz/29.97Hz
1080P
576P
24Hz
1080P
720P
25Hz
1080P
1080P
Helpful Tips & Recommendations:
1080i
480i
480P
60Hz/59.94Hz
720P
• Solid core CAT5e/6 or greater with TIA/ EIA-568B crimp pattern
• Do not share ground connection with display
• Shielded CAT5/6 with metal RJ-45 connectors are recommended to
safeguard against random video flashes caused by electromagnetic
interference (EMI).
• If the power LED indicator on the Tx/Rx unit is not on, check to make
sure that the CAT5/6 cables are not crossed i.e., Ethernet to Link instead
of Ethernet to Ethernet.
1080P
30Hz/29.97Hz
1080P
24Hz
1080P
25Hz
1080P
1405 Pioneer Street, Brea, CA 92821 | 888.975.1368 | sales@kanexpro.com | kanexpro.com