D
oa
nl
ow
d
de
®*
m
fro
JBL On Stage Micro III
e
.b
re
or
nb
de
an
.v
w
w
w
Speaker Dock for iPod/iPhone
Owner’s Manual
D
oa
nl
ow
d
de
8. D
o not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. D
o not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wide
blade or third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched,
particularly at the plugs, convenience receptacles and
the point where they exit from the apparatus.
11. O
nly use attachments/accessories specified by the
manufacturer.
12. U
se only with the cart, stand, tripod,
bracket or table specified by the
manufacturer or sold with the apparatus.
When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13. U
nplug this apparatus during lightning storms or when
unused for long periods of time.
2
15. D
o not expose this apparatus to dripping or splashing
and ensure that no objects filled with liquids, such as
vases, are placed on the apparatus.
16. To completely disconnect this apparatus from the AC
mains, disconnect the power supply cord plug from the
AC receptacle.
17. The mains plug of the power supply cord shall remain
readily operable.
18. D
o not expose batteries to excessive heat such as
sunshine, fire or the like.
T he lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to
persons.
T he exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
WARNING: To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
e
7. D
o not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
.b
re
6. Clean only with dry cloth.
FCC Information For Users
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference; and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
or
5. Do not use this apparatus near water.
FCC regulations
nb
de
4. Follow all instructions.
an
.v
3. Heed all warnings.
14. R
efer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as: when the power
supply cord or plug has become damaged, when
liquid has been spilled or objects have fallen into the
apparatus, when the apparatus has been exposed to
rain or moisture, when the apparatus does not operate
normally, or the apparatus has been dropped.
w
w
2. Keep these instructions.
w
1. Read these instructions.
m
fro
Important Safety Instructions
Radio and Television Interference
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause interference to radio or television reception, which can be
determined by turning the equipment off and then on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment to a different outlet so that the equipment and receiver
are on different branch circuits.
• Consult the dealer or an experienced radio/TV technician for help. Changes or
modifications not expressly approved by JBL could void the user’s authority to
operate the equipment.
IC Statement and Warning
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil
numérique de la classe B est conforme à la norme NMB-003 du Canada.
Important Note for All Electronic Products: Before
inserting or unplugging audio cables from the source device’s headphones
or line-level output jacks, it is good practice to turn off the device first.
This will prolong the life of your unit, help protect your device from static
electricity and prevent potential damage.
English
D
oa
nl
ow
d
de
nb
de
Notes on battery use:
an
.v
w
w
w
• If you are using rechargeable batteries, make sure all of them are fully
charged before inserting them. The JBL On Stage Micro III will not
charge rechargeable batteries.
e
.b
re
or
1. C
arefully unpack your speaker dock and confirm that all the items
shown here are included: JBL On Stage®* Micro III Speaker Dock,
power supply, remote control and iPod/iPhone adapter.
m
fro
JBL On Stage®* Micro III Easy Setup Guide
• If you are using conventional batteries, make sure that all of them are
fresh.
*
• Do not use a combination of rechargeable and conventional batteries.
Use all of one type or the other.
• The Status LED will illuminate amber when the batteries need to be
replaced.
4. Replace the battery door and rotate it to the locked position.
* AC outlet adapter varies by region.
MENU
2. Rotate the battery door to the unlocked position and remove it.
• Do not mix battery types.
• Do not mix charged and partially charged batteries.
• Batteries will not recharge while in JBL On Stage Micro III.
3. Insert four AAA batteries in the compartment. Observe the battery
polarity that is indicated inside the battery compartment.
CAUTION: Risk of explosion of battery if replaced with incorrect type.
Dispose of used batteries according to the instructions.
www.jbl.com
3
D
oa
nl
ow
d
de
m
fro
an
.v
w
w
w
IMPORTANT: If you play audio through a docked iPod/iPhone and
an audio source connected to the Audio In connection at the same
time, you will hear both of their outputs mixed through the JBL On
Stage Micro III. To hear only one source you will need to manually
turn off the source you do not want to hear.
e
.b
re
or
nb
de
5. C
onnect a USB Type Mini-B cable (not included) to the JBL On Stage
Micro III’s USB port and to a USB port on the computer on which your
iTunes is located.
USB Type Mini-B
7. Insert the included AC outlet adapter all the way into the power supply
(if there is more than one adapter, use the correct one for your region).
Then connect the power supply into the JBL On Stage Micro III’s 6V
DC In connector and plug it into an AC wall outlet.
1.
6. If you are going to use your JBL On Stage Micro III with another audio
source, plug one end of a 3.5mm stereo cable (not included) into the
Audio In connector, and plug the other end into the audio source’s
audio out or headphone out connector.
3.5mm
4
2.
English
D
oa
nl
ow
d
de
m
fro
an
.v
w
w
w
9. P
ress the JBL On Stage Micro III’s On/Off button. The unit’s Status
LED will light white when the system is on.
e
.b
re
or
nb
de
8. P
lace the appropriate iPod/iPhone adapter into the JBL On Stage Micro
III’s iPod well and place your iPod/iPhone on the docking connector.
Make sure the iPod/iPhone is inserted all the way onto the connector.
10. A
djust the volume using the (+) and (–) buttons. Press both buttons to
mute the sound; press either button to unmute the sound.
Note: If applicable, use the adapter supplied with your iPod or iPhone.
www.jbl.com
5
D
oa
nl
ow
d
de
an
.v
w
w
w
Status LED
m
fro
Remote Control Buttons
Volume Down
Play/Pause
Previous/Rewind
(Hold for rewind)
Volume Up
Mute/Unmute
Next/Fast Forward
(Hold for fast forward)
Menu Scroll Up
Menu Scroll Down
Menu
Menu Select/Enter
NOTE: iPod touch and iPhone menu navigation may require
you to manually put the iPod/iPhone in music mode.
6
e
LED Display
.b
re
or
nb
de
Your JBL On Stage Micro III’s LED will display different colors to indicate
the unit’s status:
State
White – Constant
JBL On Stage Micro III is on
White – Flashing
JBL On Stage Micro III is muted
Amber – Constant
Low battery
Amber – Flashing
JBL On Stage Micro III is muted
and low battery
No LED
JBL On Stage Micro III is in
Standby or off
English
D
oa
nl
ow
d
de
Operating Your JBL On Stage Micro III
on Battery Power
nb
de
an
.v
w
w
w
If you have inserted batteries as explained in the JBL On Stage Micro III
Easy Setup Guide – Step 3, on page 3, you can unplug the JBL On Stage
Micro III’s power adapter and the unit will operate on battery power.
e
.b
re
or
NOTE: Before attempting to synchronize your iPod/iPhone with iTunes,
be sure both your iPod/iPhone and iTunes are updated to the latest
software version.
m
fro
Synchronizing with iTunes
Before attempting to synchronize, be sure the JBL On Stage Micro III’s
USB port is connected to the computer on which your iTunes is located.
1. P
lace your iPod/iPhone on the JBL On Stage Micro III’s docking
connector. Make sure the iPod/iPhone is inserted all the way onto
the connector.
2. U
se your computer’s iTunes software to synchronize the iPod/
iPhone with iTunes.
3. W
hen you’re finished synchronizing, eject the iPod/iPhone from
iTunes.
While running on battery power, the JBL On Stage Micro III will
automatically enter the Standby mode after the system detects no audio
signal for 5 minutes. Upon detecting an audio signal the system will
return to normal operation and the LED will light up.
When running on AC power, the JBL On Stage Micro III will automatically
enter the Standby mode after the system detects no audio signal for 10
minutes. As above, it will return to normal operation upon detecting an
audio signal, and the LED will light up.
Notes on battery power operation:
• The JBL On Stage Micro III will not charge rechargeable batteries.
iPod/iPhone Charging
The JBL On Stage Micro III will charge a docked iPod/iPhone under
these conditions:
• The JBL On Stage Micro III will not charge a docked iPod/iPhone
while under battery power unless it is also connected to a computer
via a USB cable.
• When the JBL On Stage Micro III is being powered by its AC power
adapter
• When the JBL On Stage Micro III is connected to a computer via a
USB cable
The JBL On Stage Micro III will not charge a docked iPod/iPhone while
under battery power unless it is also connected to a computer via a USB
cable.
www.jbl.com
7
D
oa
nl
ow
d
de
m
fro
an
.v
w
w
w
Troubleshooting Your JBL On Stage Micro III
Troubleshooting Your JBL JBL On Stage Micro III
Solution
No sound (white LED is not illuminated):
• Make sure that the power supply is properly connected to the JBL On Stage Micro III
and to a working AC outlet.
e
.b
re
or
nb
de
Problem
• If you’re using battery power, replace all four batteries with brand-new disposable or
freshly charged rechargeable batteries. The LED will illuminate amber if the batteries
need replacing.
• JBL On Stage Micro III is in the energy conservation mode (no sound was detected
for at least 10 minutes).
No sound (white LED is illuminated):
• Touch the Volume Up (+) button to increase the system volume.
• If you’re using a docked iPod/iPhone, make sure that it is properly docked in the JBL
On Stage Micro III.
• If you’re using an auxiliary source, make sure that the audio cable is properly
connected to the JBL On Stage Micro III’s Audio In connector and to the source
component’s audio output.
• Make sure that the iPod or source component is not in the Pause mode, and that its
volume control is not turned all the way down.
Sound crackles, hisses or is distorted:
• Turn the iPod or source component’s volume down.
• Make sure the iPod’s EQ setting is set to “Off.”
Loud hum or buzzing:
• Make sure the audio cable is plugged all the way into the Audio Input jack.
• Replace the audio cable.
• Unplug the power supply and connect it to a different AC outlet.
8
English
D
oa
nl
ow
d
de
m
fro
an
.v
w
w
w
Solution
Maximum volume level is reduced:
• JBL On Stage Micro III is in Battery Conservation Mode (BCM). Switch to AC power
for higher performance.
Sound comes from only one speaker:
• Make sure that the iPod/iPhone is properly seated all the way into the docking
connector.
e
.b
re
or
nb
de
Problem
• Make sure that the audio cable is plugged all the way into the Audio In jack.
• Make sure that the audio cable is a stereo cable.
www.jbl.com
9
D
oa
nl
ow
d
de
m
fro
an
.v
w
w
w
Specifications
Docking versions of the iPod (including iPod nano 5th generation, iPod touch 2nd generation, iPod
nano 4th generation, iPod classic, iPod touch 1st generation, iPod nano 3rd generation, iPod nano 2nd
generation, iPod 5th generation, iPhone 4GB, 8GB, 16GB, iPhone 3G 8GB, 16GB, iPhone 3GS 16GB,
32GB, MP3 and CD players, desktop and laptop computers (all platforms)
Transducers:
2 x 1" JBL Odyssey™ full-range
Power:
2 watts x 2
Frequency response:
110Hz – 20kHz
Signal-to-noise ratio:
63dB
Input impedance (Aux):
3k ohms
Input connections:
Main connection – iPod and iPhone docking connector; Aux input connection – 3.5mm (1/8") stereo
mini jack
Battery requirement:
4 x AAA, NiMh or alkaline
Power requirement:
6V DC, 1.5A
Power consumption:
10W (maximum)
Dimensions (D x W x H):
6-5/8" x 6-5/8" x 2-1/4" (168mm x 168mm x 54mm)
Weight:
0.8 lb (0.36kg)
Available finishes:
Black; white
e
.b
re
or
nb
de
Compatibility:
10
English
D
oa
nl
ow
d
de
m
fro
e
.b
re
or
nb
de
an
.v
w
w
w
Harman Consumer, Inc.
8500 Balboa Boulevard, Northridge, CA 91329 USA
www.jbl.com
© 2010 Harman International Industries, Incorporated. All rights
reserved.
Features, specifications and appearance are subject to change without
notice.
JBL is a trademark of Harman International Industries, Incorporated,
registered in the United States and/or other countries. Odyssey is a
trademark of Harman International Industries, Incorporated.
*The trademark On Stage is used with permission of OSA International, Inc.
iPhone, iPod, iPod nano, iTunes and iPod touch are trademarks of
Apple, Inc., registered in the U.S. and other countries. iPod/iPhone not
included.
“Made for iPod and “Made for iPhone” mean that an electronic
accessory has been designed to connect specifically to iPod and
iPhone, respectively, and has been certified by the developer to
meet Apple performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and regulatory
standards.
www.jbl.com
11