Pico OUTPUT Manual

PICO
OUTPUT
Thank you for purchasing Erica Synths Pico Series module!
With Pico Series we challenged ourselves – can we make ANY
superior functionality synth module 3HP wide and affordable?
FEATURES
Stereo input
High quality headphones amplifier
3,5mm headphones output jack
Headphones volume control
3,5mm stereo line output jack
TECHNICAL SPECS
Erica Pico OUTPUT module is just what you need to monitor your
music on headphones and have standardized connection to
mixing desks. 3,5mm stereo output jack allows you to connect
the Pico System directly to virtually any speaker system or
line input. Even in your car.
Input level
Power consumption
Module width
Module depth.
10Vptp
+20mA, -7mA
3HP
35mm
PICO
OUTPUT
OUTPUT
PHONES
Connect your stereo headphones here!
Hi-Fi headphones amplifier ensures the
best monitoring quality.
Adjust phones volume with this
potentiometer
VOLUME
IN L
Connect audio signals here! The Left
channel is normalled to the right, so,
if nothing is patched to the Right
input, you still will have a signal in
both left and right outputs.
IN R
USE 3,5MM STEREO JACK TO CONECT THE
OUTPUT TO YOUR MIXING DESK!
OUT
PICO
Safety Instructions
Please follow the instructions for use of the Erica Synths module
below, ‘cause only this will guarantee proper operation of the module
and ensure warranty from Erica Synths.
Water is lethal for most of the electric devices, unless they are made
waterproof. This Erica Synths module is NOT intended for use in a humid or
wet environment. No liquids or other conducting substances must get
into the module. Should this happen, the module should be disconnected
from mains power immediately, dried, examined and cleaned by
a qualified technician.
Do not expose the module to temperatures above +50° C or below -20° C.
If you have transported module in extreme low temperatures, leave it in
room temperature for an hour before plugging it in.
Transport the instrument carefully, never let it drop or fall over.
Warranty does not apply to modules with visual damages.
The module has to be shipped in the original packaging only. Any module
shipped to us for return, exchange and/or warranty repair has to be in
its original packaging. All other deliveries will be rejected
and returned to you. Make sure you keep the original packaging and
technical documentation.
This device complies to the EU guidelines and is manufactured ROHS
conforming without use of led, mercury, cadmium and chrome.
Nevertheless, this device is special waste and disposal in household
waste is not recommended.
You will find Erica Synths terms of warranty at www.ericasynths.lv.
Items for return, exchange and/or warranty repair have to be sent to:
Erica Synths
Andrejostas Str. 12
Riga
Latvia
LV-1045
User manual by Girts Ozolins@Erica Synths
Design by Ineta Briede@Carre Branding
Copying, distribution or any commercial use in any way is prohibited and needs the written
permission by Erica Synths. Specifications are subject to change without notice.
In case of any questions, feel free to contact us through www.ericasynths.lv or via e-mail
info@ericasynths.lv