Professional Headend Solutions
Operating instructions
SAT - TV Transmodulator
DVB-S (QPSK)
→
ATV (AM)
Contents
1. Safety and operating instructions.................................................................... 2
2. Device variants ................................................................................................. 2
3. General ............................................................................................................. 2
4. Front view ......................................................................................................... 3
5. Function description ........................................................................................ 3
6. Adjustments ..................................................................................................... 3
6.1 Adjustment with the Headend Controller................................................... 3
6.2 Adjustment with the PC / laptop................................................................. 3
7. LED`s on front panel......................................................................................... 4
8. Optional hardware variants .............................................................................. 4
8.1 IF interface ................................................................................................. 4
8.2 Additional A/V monitor outputs.................................................................. 5
9. Programming by Web server ........................................................................... 6
9.1 Main menu . ............................................................................................. 6
9.2 Software options . ...................................................................................... 6
9.3 Loading the programme list....................................................................... 7
9.4 Extended settings . .................................................................................... 8
9.5 Manual settings ......................................................................................... 9
9.6 Factory settings.......................................................................................... 9
9.7 Status of device ....................................................................................... 10
10. Manual menu control at the Headend Controller ........................................ 11
11. Trap messages ............................................................................................. 11
12. Block diagram . ........................................................................................... 12
13. Head end BUS structure............................................................................... 12
14. Example of use ............................................................................................ 13
15. Technical data .............................................................................................. 13
16. Glossary ....................................................................................................... 14
17. Bibliography ................................................................................................. 14
18. History .......................................................................................................... 14
STB 29x
Part No: 9818.xx
STB
29x
Part N : 9818.xx
SAT - TV Transmodulator
DVB-S (QPSK) → ATV (AM)
o
1. Safety and operating instructions
When assembling, starting-up and adjusting the modules, it is necessary to consider the system specific
references in the manual instruction!
The modules may only be installed and started up by authorized technical personnel!
When assembling the modules into the receiving points, the adherence of the EMC regulations is to be secured!
The assembly and wiring have to be done without voltage!
All active modules may only be operated with the Headend Controller HCB x00 or Bus Extender
BEB x00!
The main voltage and the operating voltage of the modules working by DC have to be in complience to the operating
parameters described in the technical data.
With all work the defaults of the DIN EN 50083 have to be considered! Especially the safetyrelevant execution of the
DIN EN 60728-11 [2] is necessary!
2. Device variants
STB 291
STB 291
STB 291
STB 291
STB 292
STB 292
STB 292
STB 292
STB 292
STB 292
9818.01
9818.02
9818.08
9818.09
9818.21
9818.22
9818.24
9818.25
9818.28
9818.29
DVB-S (QPSK) → ATV (AM) standard B/G (without BISS decryption)
DVB-S (QPSK) → ATV (AM) standard B/G
DVB-S (QPSK) → ATV (AM), A/V standard B/G
DVB-S (QPSK) → IFI → ATV (AM) standard B/G
DVB-S (QPSK) → ATV (AM) standard D/K 1*
DVB-S (QPSK) → ATV (AM) standard D/K 2*
DVB-S (QPSK) → ATV (AM), A/V standard D/K 2*
DVB-S (QPSK) → ATV (AM), A/V standard D/K 1*
DVB-S (QPSK) → IFI → ATV (AM) standard D/K 2*
DVB-S (QPSK) → IFI → ATV (AM) standard D/K 1*
* D/K 1: standard D/K with sound carrier 6,5 MHz and 6,25 MHz
D/K 2: standard D/K with sound carrier 6,5 MHz and 5,74 MHz
Minimum software requirements for HCB x00:
9650.03:
version 2.34**
9650.04/.05: version 3.18**
9652.01:
version 3.23**
**) Updates: www.blankom.de
3. General
The STB 29x SAT -TV transmodulators are components of the B-LINE head end system which has been designed as a complete
package for medium-sized distribution networks. They are components which select a programme from a DVB-S transport
stream and convert it into an analogue cable TV channel. All the components are programmed via a single central control unit and
thereafter each component will function independently. The status of the modules are displayed via LED’s (see chapter 7 „LED`s
on front panel“).
2
STB
29x
Part N : 9818.xx
o
SAT - TV Transmodulator
DVB-S (QPSK) → ATV (AM)
4. Front view
SAT-TV input port
Operating voltage/
control bus
“STANDBY“ LED (red)
“READY“ LED (green)
“ADDR.“ LED (yellow)
Adress selector switch
RF output for TV
5. Function description
The digital SAT IF signal (transponder) passes through an input amplifier and then will be transported to the frontend, where it will be
selected and demodulated to the transport stream level. From the transport stream, the succeeding MPEG decoder selects a programme and generates an analogue video signal and a digital audio signal. In the D/A converter which comes next; these two are
converted into two analogue audio channels. The analogue signals are fed into separate modulators and then aggregated in the IF
(intermediate frequency) position. Then the IF filtering takes place, and after that the production in the desired output channel. The
fact that mixers are used which can accommodate a high output, also fractional N-PLLs, guarantees high-quality transmission. There
is a free choice of frequency in the output channel from 45 to 862 MHz. On the output side, the modulator does not leak to adjacent
channels. If the output level changes, the red LED will flash. Every time the level or frequency figures are programmed, automatic
measurement of the reference level takes place; his function will, however, not start until 100 seconds have elapsed after start-up of
the system. When the output load changes (perhaps because the output cable is disconnected), a warning and display item for a
level fault may also appear. When the fault has been identified, the appropriate SNMP Trap message will be sent. Use of this function
is optional. By activation of the respective software option the services like test lines, the flash of subtitles and BISS decryption can be
used.Supported are the BISS mode 1 and the BISS mode E with input of the necessary Injected ID, but not the BISS mode E with the
additional input of the optional Buried ID.*
*
BISS decryption isn‘t available in the device variat 9818.01!
6. Adjustments
6.1 Adjustment with the Headend Controller
· Adjustment of the addresses at the Bus Extender BEB x00 and at the modules
·Activation of the programming mode of each module by selecting the line (BEB x00) and the module position (01... 15) at the
Headend Controller(HCB x00)
→ yellow LED will be lit up til the beginning of the parameter adjustment
·Adjustment of the STB 29x parameter (see chapter 10) → green LED is lit up
·After the programming the STB 29x will be automatically switched into the operating
→ yellow LED lights up briefly / green LED is lit up
6.2 Adjustment with the PC / Laptop
·Condition for the remote programming is an “online - connection” after IP - standard and an ethernet connection at the PC / Laptop
·Adjustment of the line / position addresses at the Bus Extender BEB x00 as well as at the modules
·At the Headend Controller HCB x00 IP - address input (e.g. 192.168.001.001)
·For “direct connection” between a PC and HCB x00 use a crossed patch cable (RJ 45)
·For connection over a deviation use an uncrossed patch cable
·HTML - browser start-up and put in IP - address as target address
·If connected correctly the HTML - control surface at the PC will open up and a blue LED (LINK) at the HCB x00 will be lit up).
·All adjustment of the modules are specified at the control surface.
The manual instructions of the Headend Controller HCB x00 and the Bus Extender BEB x00 have to be considered!
3
STB
29x
Part N : 9818.xx
o
SAT - TV Transmodulator
DVB-S (QPSK) → ATV (AM)
7. LED`s on front panel
Designation (Colour)
Status
Meaning of display
STANDBY (red)
permanently illuminated
Component is on standby
flashing
Component faulty (hardware) or level fault
permanently illuminated
Component working, everything ok
flashing
error warnings, depending on signal:
- tuner not sync (e.g. when there is no input signal)
- service settings are not valid
- service is decrypted
illuminated or flashing
remote control making contact / data being exchanged
READY (green)
ADDR. (yellow)
8. Optional hardware variants
8.1 IF interface
The IF interface is an optional additional function/equipment for the modules of the head end system B - LINE. The IF - interface separates the internal analogue TV- IF - signal - path and enables the lead out, the external processing and the re-feeding of the IF- signal
into the module.The connection sockets (type SMA) are located at the backside of the individual modules. The impedance is 75 Ohm.
The following device variants are equipped with an IF interface:
9818.09
9818.28
9818.29
View (back side of component
Function description
The analogue TV - IF signal (picture and sound carrier) will be split after the main selection (SAW filter) and transported to the IF output socket. The processed signal will go from the IF input socket over an absorption- and adjustment unit directly to the upward
mixer. It has to be considered that no other channel selective filter stages are located in the input signal path and no level adjustments
and/or level control possibilities are available..
For the normal function of the interface, the conditions defined in the manual instructions have to be considered!
4
STB
29x
Part N : 9818.xx
o
SAT - TV Transmodulator
DVB-S (QPSK) → ATV (AM)
Operating instructions
1. The IF input level may only vary ±1 dB from the IF output level (95 dBμV). External IF modules may not change the level of the
signal and/or have to provide the necessary level at the output!
2. The external IF module, which is used for the processing and/or feeding of the IF signal, may not produce any spurious, which fall
below the necessary signal-to-noise ratio (>60 dB). If necessary, an additional IF filter has to be connected between the output of
the external module and the IF interface input..
3. If a module with IF interface is mounted to the wall, the usage of SMA angle plugs for the interface side of the connection cable is
recommended. The cables have to be screwed onto the interface socket before installing the module.
4. The connection cables and the plug connectors for the external IF modules, as well as their IF connections must have an impedance of 75 ohm (e.g. RG 179 B/U with 75 ohm - BNC - plug connections).
5. To bypass the IF interfaces, the interface sockets have to be connected with a short cable (jumper). An internal module bypass
(e.g. by a jumper) is not possible!
Technical data
Output / input frequency (picture carrier analogue TV)
Frequency range
Output / input level
Impedance
Connector
IF decoupling
38,9 MHz
32,15 ... 40,15 MHz
95 dBμV
75 Ω
2 x SMA socket
≥ 80 dB
8.2 Additional A/V monitor outputs
These options have in comparison with the relevant basic variant a video output and two audio outputs for monitoring. The additional
outputs are located in the upper part of the front side and are implemented as MCX sockets.
The following device variants are equipped with additional A/V outputs:
9818.08
9818.24
9818.25
Front view
SAT-TV input port
Audio output L,R
Video output
Operating voltage/
control bus
“STANDBY“ LED (red)
“READY“ LED (green)
“ADDR.“ LED (yellow)
Adress selector switch
RF output for TV
Technical data
Audio output
Connector
Video output
Connector
0,7 Veff at 10 kΩ
MCX socket
1 Vss at 75 Ω
MCX socket
5
STB
29x
Part N : 9818.xx
o
SAT - TV Transmodulator
DVB-S (QPSK) → ATV (AM)
9. Programming by Web server*
9.1 Main menu
Name of device, item number, address in head end
Description Input
SAT IF
QPSK Symbol rate
FEC
Status Name of programme (max. 30 characters)
adjustment range 950 ... 2150 MHz
adjustment range 1000 ... 45000 kSps
selection: 1/2, 2/3, 3/4, 5/6, 7/8, auto
display wether SYNChronization or
noSYNChronisation with Input
Decryption settings
(will only be available if “BISS decryption” option is on)
BISS key
BISS-E injected ID input of the 12-digit code in BISS mode 1
or of the 16-digit code in BISS mode E
input of the 14-digit code in BISS mode E,
no input in BISS mode 1!
Program settings
Program listing Service ID Language Language code Service type see Menu 2
freely selectable (0...65535)
freely selectable (0...255)
shows the code for the language selected
shows the type of service selected
(TV, radio)
Output
Frequency table standard B/G standard D/K
Attenuation channel selection:
channel 2..69
channel R1.. 69
adjustment range 0 ... 31.5 dB
Module settings
Operating status Transmit trap SYNC check Level monitoring selection: On, Off, Reset
On/Off, if SNMP option in HCB x00
enabled,otherwise “locked“ display
checks SYNC at input port. selection:
fast, normal, slow
at output port. selection: On, Off
Routing to the appropriate adjustment menu:
Software option see menu 1
Extended settings see menu 3
Status see menu 6
Default set see menu 5
9.2 Software option (menu 1)
Name of device, item number, address in head end
Dialogue for entering code to activate the “test line”
(CKB 101), “subtitling” (CKB 102) and “BISS decryption”
(CKB 104) software options. When the page is called up, the
current state of activation for the relevant option will be displayed. The option „BISS decryption“ is not available in the
device variant 9818.01!
* Further details on this are to be found in the HCB manual
6
STB
29x
Part N : 9818.xx
o
SAT - TV Transmodulator
DVB-S (QPSK) → ATV (AM)
9.3 Loading the programme list (menu 2)
This menu contains a list of all services contained in the data stream. Language selection can take place here if available. Any service
is adopted or given new settings by clicking the relevant “Set” button.
7
STB
29x
Part N : 9818.xx
o
SAT - TV Transmodulator
DVB-S (QPSK) → ATV (AM)
9.4 Extended settings (menu 3)
Name of device, item number, address in head end
Video for setting the video parameters
Video output selection: On, auto off, auto colour
palette bar
Colour bar selection: On, Off
Colour system selection: PAL, SECAM, NTSC
Video format selection: Letterbox,center cut,1:1,
pillarbox, 4:3 vertical cut, 20:9 letterbox
Audio settings
Audio gain adjustment range +6...-20 dB
Audio mode selection: auto, monoL, monoR, stereo,
dual, dual invers (2 sound carriers)
auto, monoL, monoR, monoL+R (only 1
sound carrier)
Output
Sound deviation selection: 30 kHz (2 sound carriers)
30 kHz, 50 kHz (only 1 sound carrier)
Sound carrier 2 selection: On, Off
Picture carrier frequency input in kHz, automatic
frequency
rounding up or down to next 10 kHz on
adoption
VPS settings
CNI code freely selectable hex. (0x000…0xFFF)
Source audiomode selection: MPEG, A056(MPEG)
Source PIL selection: A056(PDC), A056, PDC,
TimerControlCode
Complementary data
Teletext
selection: On, Off
WSS insertion selection: On, Off
Subtitling
(will only be available if “Subtitling” option is on)
Mode Selection: Off, Teletext, DVB
Settings DVB Subtitling
(will only be available if “Subtitling” option is on)
DVB languages index freely selectable (0...255)
DVB language code shows the code for the language
selected
Use extended ID‘s
selection: yes, no
Composition Page ID shows the ID (decimal figure)
Ancillary Page ID shows the ID (decimal figure)
Settings Teletext subtitling
(will only be available if “Subtitling” option is on)
Teletext site Background Character mode freely selectable (0...65535)
selection: not transparent, semi-transpa
rent, transparent, black transparent
selection: auto, manual
The following parameters only apply if the manual mode has been selected for the font:
Basic character Supplementary character
National table Test lines
selection: Latin,Cyrillic-1,Cyrillic-2, Cyril-
lic-3, Arabic, Greek, Hebrew
selection: Latin, Cyrillic, Arabic, Greek,
Hebrew
selection: standard table, alternative
table, no country code, English, German,
Swedish, Italian, French,Spanish, Czech,
Rumanian, Polish, Estonian, Latvian,
Serbian, Turkish, Danish
(will only be available if “Test lines” option is on)
Line 17 Line 18
Line 330
Line 331
a test signal can be sent on all four of
these lines,the signal selection is:
off, CCIR17, CCIR 18, CCIR 330m,
CCIR331, Sinus (x)/x, Ramp
Extended monitoring options
Internal AVsync Info display option on status page (menu 6),
selection: On, Off
Routing to the appropriate adjustment menu:
Manual settings see menu 4
8
STB
29x
Part N : 9818.xx
o
SAT - TV Transmodulator
DVB-S (QPSK) → ATV (AM)
9.5 Manual settings (menu 4)
Name of device, item number, address in head end
PCR for current service
Use PCR PID freely selectable (0...65535))
Manual PID settings
PCR-PID freely selectable (0...65535)
Video-PID freely selectable (0...65535)
Audio-PID freely selectable (0...16383)
Teletext-PID freely selectable (0...65535)
VBI-PID freely selectable (0...65535)
Subtitle-PID freely selectable (0...65535)
Composition Page-ID freely selectable (0...65535)
Ancillary Page-ID freely selectable (0...65535)
9.6 Factory settings (menu 5)
When this menu is called up, all the settings made on the
EEPROM will be deleted and replaced by the default
settings. The modul will go back to these default values.
Once the setting process is over, there will be automatic
return to the main menu.
9
STB
29x
Part N : 9818.xx
o
SAT - TV Transmodulator
DVB-S (QPSK) → ATV (AM)
9.7 Status of device (menu 6)
Name of device, item number, address in head end
Tuner
Status BER
Noise margin
Gain margin
FEC
input frequency
offset
synchronisation status
shows the bit error ratio
... in dB
... in dB
shows the FEC of the transponder
shows the frequency departure from
adjusted input frequency
MPEG Decoder
Status Synchronisation status for the TS and the
audio and video decoder
SysClock AudioSync VideoSync details of system timing
extended details of synchronisation status of the audio decoder
extended details of synchronisation status of the video decoder
The following will only be displayed if the internal AVsync info
option is switched on (see menu 3)
Complementary data
Current VPS data shows detailed information about
current VPS data
Current WSS data shows detailed information about
current WSS data
The following will only be displayed if the “test lines” option is switched
on:
Test line insertion Shows which test signal is set for the 4
lines
Status output
Signal level Status PLL1/2 Sound carrier 1/2 Shows status of signal level at output
(ok, too high, too low)
Shows whether or not PLL1 (or PLL2) is
activated (ok, not ok)
Shows frequency of sound carrier 1 or 2
Software versions
Shows the software versions for the controllers as follows:
- Controller of terminals board
- MPEG Controller
- Controller IF converter
Information
Temperature AP Device number Device index 10
Temperature of terminals board
display of the device number
display of the device index (hardware)
STB
29x
Part N : 9818.xx
SAT - TV Transmodulator
DVB-S (QPSK) → ATV (AM)
o
10. Manual menu control at the Headend Controller (HCB x00)
STB 29x start
Edit or Close
Power status
On / Off
SAT - IF input
Frequency
QPSK Symbol rate
FEC
950 ... 2150 MHz
1000 ... 45000 kSps
auto, 1/2, 2/3, 3/4, 5/6, 7/8
Scan
No
Service ID
0 .. 65535
Audio - Index 0 .. 16383
Yes
Program selection
Languages
TV sound
Audio gain
+6 ... -20 dB
Video settings
Video output
Colour system
Colour bar
Video format
On, auto off, auto colour palette bar
PAL, SECAM, NTSC
On / Off
Letterbox, center cut, 1:1, pillarbox,
4:3 vertical cut, 20:9 Letterbox
VPS settings
VPS - CNI Code
Source VPS Audio
Source VPS - PIL
0x000 ... 0xFFF
MPEG, A056(MPEG)
A056(PDC), A056, PDC,
Timer Control Code,
Additional data
Teletext
WSS insertion
Teletext site
Background
On / Off
On / Off
0 .. 65535
not transparent, semi-transparent,
transparent, black transparent
Output
Output frequency
45000...862000 kHz
Output attenuation
0...31.5 dB
Sound carrier 2
Off Sound carrier 2
On
Sound deviation 30/50 kHz Sound deviation 30 kHz
Audio mode
Audio mode
auto, mono L,
auto, mono L,
mono R, mono L+R
mono R, stereo,
dual,dual invers
Level monitoring
On / Off
Channel name
STB 29x end
11. Trap messages
Item
Message
Message Typ
Explanation
01
Signal OK
INFORMATION
Component working, everything ok
02
Input not sync
WARNING
Input not synchronised
03
MPEG Error
CRITICAL
MPEG error
04
System reset
WARNING
System has been reset after internal error
05
MPEG-Decoder not sync
WARNING
MPEG decoder not synchronised
06
Power fail
CRITICAL
Error in power supply
07
Tuner PLL out of range
WARNING
Tuner PLL not locked
08
IIC Error
CRITICAL
Error in IIC or internal hardware
11
STB
29x
Part N : 9818.xx
SAT - TV Transmodulator
DVB-S (QPSK) → ATV (AM)
o
Item
Message
Message Typ
Explanation
09
Output Signallevel too small
WARNING
Level of output signal too low
10
Output Signallevel too large
WARNING
Level of output signal too high
11
Output Signallevel ok
INFORMATION
Level of output signal ok
12
PLL error
CRITICAL
PLL at output not activated
13
Tonmode Mono L+R
INFORMATION
Sound mode set as mono total
14
Tonmode Mono L
INFORMATION
Sound mode set as mono on left
15
Tonmode Mono R
INFORMATION
Sound mode set as mono on right
16
Tonmode Stereo
INFORMATION
Sound mode set as stereo
17
Tonmode Dual
INFORMATION
Sound mode set as dual
18
Tonmode Dual invers
INFORMATION
Sound mode set as dual inverse
12. Block diagram
DVB - MPEG 2
TS
SAT IF
950...
2150 MHz
TS
MPEG
decoder
DVB-S
frontend
Video/Audioprocessing
Vestigial
sideband
IF modulator
2x FMmodulator
Modul
ADDR. 15
Modul
ADDR. 15
Modul
ADDR. 15
Modul
ADDR. 01
Modul
ADDR. 01
Modul
ADDR. 01
.
BEB x00
ADDR. 02
Modul
signal processing
unit
BEB x00
ADDR. 15
BEB x00
Bus Extender
HCB x00
HCB x00
Headend
Controller
BEB x00
ADDR. 01
13. Head end BUS structure
The number of the possible module connections (00 ... 15) to a
BEB x00 depends on the total power consumption of this line!
12
IF
RF
45...
862 MHz
RF
STB
29x
Part N : 9818.xx
SAT - TV Transmodulator
DVB-S (QPSK) → ATV (AM)
o
14. Example of use
Integration in existing B-LINE configuration
conversion of 8 programs
QPSK in PAL
SAT-IF Input
Pin min.:42 dBµV
0.95...2.15 GHz
Output to existing combining
i.e. Astra 19,2°
High Horizontal
TP
- 20 dB
DVB-S
3X
DVB-S
DVB-S
DVB-S
DVB-S
DVB-S
DVB-S
DVB-S
X2
1X
HCB100
BEB100
STB291
STB291
STB291
STB291
STB291
STB291
STB291
STB291
PCB190
15. Technical data
Antennenanlage
Betreiber
Version
SAT - IF Input
Frequency range Frequency step AFC range AGC level range Connector Impedance Größe
DIN A4
950 … 2150 MHz
1 MHz
± 3 MHz
42 … 82 dBμV
F socket
75 Ω
QPSK demodulator / decoder
Symbol rate Code rate Roll off Signal processing
1 … 45 MSps
1/2, 2/3, 3/4, 5/6, 7/8
35 %
ETS 300 421 (DVB - S) [1]
TV ouput
9818.01/.02/.08/.09:
TV standard
Sound carrier frequencies
B/G
5.5 / 5.742 MHz above pic.carr.
D/K
6.5 / 6.25 MHz above pic.carr.
9818.21/.25/.29:
TV standard
Sound carrier frequencies
9818.22/.24/.28:
TV standard
D/K
Sound carrier frequencies 6.5 / 5.742 MHz above pic.carr.
Sound type double carrier FM
Sound mode mono / stereo / dual /auto
(PDC controlled)
Audio deviation 1 mono – carrier 30 / 50 kHz
Audio deviation 2 mono - carrier 30 kHz
Audio deviation dual sound
30 kHz
Output frequency range 45 … 862 MHz
Tuning steps 10 kHz
Output level max. 116 dBµV
Range for level adjustment
0...31.5 dB (0.5 dB steps)
Channel allocation adj.channel compatible
Connector F socket
Impedace 75 Ω
Return loss ≥ 18 dB 45 MHz
-1.5 dB/ Octave
Signal quality
Single channel intermodulation ≥ 66 dB
Signal to noise ratio (S/N)
3rd order ≥ 60 dB
Spurious 45 ... 862 MHz ≥ 60 dB
C/N in channel (BW = 4.8 MHz) typ. 69 dB
Bearbeitet von
Wuckel
C/N (> 25 MHz, distance from
centre of channel;BW=4.8 MHz) typ. 80 dB
S/N ratio parallel sound
unweighted/ weighted typ. 62/ 56 dB
Output level stability max.1 dBpp
Frequency stability ± 30 kHz
Datei
Beispiel_STB291.net
AND Version 3.3, Serien-Nr. 1581 für:
Datum
02.03.2009
Blatt
1 von 1
Blattname
Blankom Antennentechnik GmbH Hermann-Petersilge-Str. 1 07422 Bad Blankenburg
Operating parameters
Current / voltage Residual ripple of
supply voltage
Enviromental conditions
Temperature range Temperature range for
data keeping Relative humidity Method of mounting Location of mounting Physical information
Dimensions (l x w x h)
without 19” - adapter with 19” - adapter Weight 12 V (0.2 V)/ 750 mA
≤ 10 mVpp
-10 ... +55 °C
5 ... 45 °C
≤ 80 % (non condensing)
vertical
splash-proof and
drip-proof
50 x 276 x 148 mm
50 x 301 x 148 mm
1,250 g
Delivery content
1 x BUS connector
Software options
Test lines Subtitling BISS decryption *
13
CKB 101 (9650.51)
CKB 102 (9650.52)
CKB 104 (9650.54)*
not available for device variant 9818.01
STB
29x
Part N : 9818.xx
o
SAT - TV Transmodulator
DVB-S (QPSK) → ATV (AM)
16. Glossary
AFC AGC AM AP ATV AV BER BISS
BW CCIR C/N D/A
DVB ETSI FEC FIFO FPGA HTML
HTTP I/Q ID IF IFI
IIC IP LED MC MIB MPEG NIM NTSC
PAL
PCR PDC
PID
PMT PLL
RF
SECAM
SNMP SPI SPTS TS TV VPS WSS Automatic Frequency Control
Automatic Gain Control
Amplitude modulation
Anschlussplatte (Terminals board)
Analogue Television
Audio/Video
Bit Error Ratio
Basic Interoperable Scrambling System
Bandwidth
Comité Consultatif International des Radiocommunications
Carrier to Noise ratio
Digital-/ AnalogDigital Video Broadcasting (-C Cable, -S Satellit, -S2 Satellite 2, -T Terrestrial)
European Telecommunications Standards Institute
Forward Error Correction
First In – First Out
Field Programmable Gate Array
Hypertext Markup Language
Hypertext Transfer Protocol
In-phase/Quadrature-phase
Identifier
Intermediate Frequency
Intermediate Frequency Interface
Inter-Integrated Circuit (I²C bus, data bus within device)
Internet Protocol
Light Emitting Diode
Microcontroller
Management Information Base
Moving Picture Experts Group
Network Interface Module
National Television Systems Committee*
Phase Alternating Line*
Program Clock Reference
Program Delivery Control
Packed Identifier
Program Map Table
Phase-locked loop,
Radio Frequency
Séquentiel couleur à mémoire*
Simple Network Management Protocol
Serial Peripheral Interface
Single Program Transport Stream
Transport Stream
Television
Video Programming System
Wide Screen Signalling
*
colour-encoding systems of analogue television
17. Bibliography
[1] EN 300 421: Digital Video Broadcasting (DVB): Framing structure, channel coding and modulation for 11/12 GHz satellite
services
[2]EN 60728-11: Cable networks for television signals, sound signals and interactive services Part 11: Safety
(IEC 60728-11:2005); German version EN 60728-11:2005
[3]RFC 1157 Request for Comments (RFC): RFC Database URL: http://www.rfc-editor.org/rfc.html
18. History
Version
Date
Modification
Author
1.00
04.03.2009
basic document
Häußer
Options and other TV standards available upon request! Changes due to technical progress possible
BLANKOM Antennentechnik GmbH
Hermann-Petersilge-Straße 1 • 07422 Bad Blankenburg • Germany • Telefon +49 (0) 3 67 41 / 60-0 • Fax +49 (0) 3 67 41 / 60-100
14
Declaration of Conformity
The Manufacturer
BLANKOM Antennentechnik GmbH ∙ Hermann-Petersilge-Str. 1 ∙ 07422 Bad Blankenburg ∙ Germany
herewith declares the conformity of the product group
Product name:
SAT - TV Transmodulator
Type:
STB 29x
Product number:
9818.xx
according to the following regulations
EN 50083-2
EN 60728-11 (as far as relevant)
and additional device-specific regulations, enclosed above, which these products are subjected to.
Datum: 25.02.2009
Unterschrift:
(Geschäftsführer)
15