4K HD Cable Clicker Designed for Single

4K HD Cable Clicker Designed for
Single-Click to Display
The KanexPro 4K-HDCLICKER is an HDMI based cable controller
designed to Click and show the content from your laptop. It
also acts as a fast-switch to toggle HDMI source devices such as
laptops, tablets and other smart devices enabling you to display
the content instantly by a click of a button. Just single “Click-toshow me” button to selection switch any source to display under
single window layout or single Click-to-show me button to step
in or step out any source under multiple window layouts. Press &
hold the Click-to-show me button to select switch any source to
full-screen display under multiple window layouts.
Zero Configuration required
There is absolutely no set up or configurations required in
order to use this cable clicker. No Wi-Fi connectivity or Internet
needed since its wired using existing HDMI/ DisplayPort cabling.
HDMI Locking interface
The 4K-HDCLICKER comes with a cable lock screw hole and
two tiny screws to tightly lock and fasten the cable firmly, which
are then connected to the HDMI devices being, used to Click-toshow me. This will prevent from accidental cable jostle or cable
pull while connected in the conference room.
Click-to-Show up to 4 video tiles
on one 4K display.
Connect HDMI or DisplayPort
4K-HD Clickers to your laptops
to instantly share your content.
•
Pre-configured HDMI dongle for connecting
one-end to a Laptop/PC
•
Supports Click-to-show me function to display
content on to the display
•
Supports HDMI 1.4 revision up to 4K@30Hz for
input & loop out
•
Supports 1080p, 1920x1200 WUXGA
resolutions
•
Available in HDMI and DisplayPort
interconnects
•
Press & Hold “to select entire display
•
Lets you connect the other end to the input of
the Presentation Scaler Switcher
•
Zero configuration and does not require Wi-Fi
or internet
•
Lockable HDMI controller – to prevent signal
loss or cable jostle
•
Enables multiple functions to see in/out of the
display
MODEL
DESCRIPTION
INPUTS
OUTPUTS
BENEFITS
4K-HDCLICKER
HD Cable Clicker
Designed for
Single-Click to
Display
1x HDMI 19-pin
female connector
1x HDMI 19-pin
female connector
The 4K-HDCLICKER can be easily integrated with floor, table or wall cable
connection boxes by purely connecting existing HDMI or DisplayPort
wiring to HDBT-VTSC72-4K or HD-SC71D-4K Presentation Systems in
conference room or corporate executive boardrooms to ensure the team
can visually focus on the work at hand and elevate the role of content
sharing to one 4K Display. And it seamlessly works with any Video
conferencing systems such as Polycom, Cisco, and Avaya.
4K-DPCLICKER
DP Cable Clicker
Designed for
Single-Click to
Display
1x 20-pin
DisplayPort female
connectors with
locking mechanism
1x 20-pin
DisplayPort female
connectors with
locking mechanism
The 4K-DPCLICKER can be easily integrated with floor, table or wall cable
connection boxes by purely connecting existing DisplayPort wiring to HDQVSC72-4K or HDSC71D-4K Presentation Systems in conference room or
corporate executive boardrooms to ensure the team can visually focus on
the work at hand and elevate the role of content sharing to one 4K Display.
And it seamlessly works with any Video conferencing systems such as
Polycom, Cisco, and Avaya.
KANEXPRO
|
1405 PIONEER STREET
|
BREA
|
CA |
P H ( 8 8 8 ) 9 7 5 - 1 3 6 8 | w w w. k a n e x p r o . c o m
92821