12” 2-way Active Sound Reinforcement Loudspeaker

SF12A
12” 2-way Active Sound Reinforcement Loudspeaker
Live Sound, Speech, Playback, DJ, A/V, Institutional Venues
Specifications
General Description
model#
SF12A
Type
12" 2-way
LF Amplifier Power
200W (AB), RMS @ 1% THD
320W (AB), peak power
HF Amplifier Power
50W (AB), RMS @1% THD
80W(AB), peak power
Input Type
Balanced Differential Line
Input Impedance
Line: 20k ohms
Sensitivity
Line: 1.23V(+4dBu)
Freq. Range(-10dB)
55 Hz -20k Hz
Max Calculated SPL
125 dB
Crossover Frequency
2.4k Hz
EQ
Shelving:
12k Hz / +/-15dB
80 Hz / +/-15dB
Connectors
Input: XLR and 1/4" jack
Output: Male XLR Link
AC Input
Male IEC
AC Power Requirement
(Depends on region)
115V, 50 Hz/60 Hz
230V, 50 Hz/60 Hz
HF Horn Coverage
Angles(-6dB)
90°H x 45°V
Enclosure Material
Polypropylene
Suspension
M8
5 Forged Steel Eyebolts:
Top x 2, Bottom x 2and 1 on rear
of enclosure
Finish/Color
Black
Transducers/
Replacement Parts
LF: L12G 12”(305mm)
Ferrite driver
HF: H34G, 1.34”(34 mm) driver
Dimensions(HxWxD)
62.3 x 37.8 x 36.3 (cm)
24.5 x 14.9 x 14.3 (in.)
Net Weight
20 kg (44 lbs)
Shipping Weight
22.6 kg (49.8 lbs)
The SF12A sets a best value for powered speakers. Its design provides the user an
easy to use 2-band EQ section, reliable HF/LF protection circuit and plenty of power
in a very compact, attractive package. This is a full range loudspeaker ideal for
applications requiring
high-quality sound. Careful attention to the dynamic requirements of music guided
the amplifier design to provide high SPL. The high quality microphone preamplifier
provides great sounding vocals or speech. A master level control sets the desired
SPL, and the mic/line input is a flexible feature for a small PA with a single
microphone. Its linear response is easily optimized for speech or music with the on
board 2-band equalization. Built-in pole mount and optional rigging hardware make
it easy to position for your application. The high-frequency section of the SF12A
utilizes an integrated 90° x 45° horn to ensure high intelligibility. Vocals sound
natural yet “cut through” reverberant, noisy rooms. The SF12A’s high-frequency
horn is driven by the H34G, a 1.34 inch diaphragm, wide-bandwidth, titaniumdiaphragm driver for smooth and extended high-frequency response.
Features
•
•
•
•
•
•
•
•
•
•
•
•
Lightweight, Ergonomic Size - 44 lb (20 kg)
Angled Enclosure for Monitor Use
Mic/Line Inputs
320 W Dynamic LF Power
80 W Dynamic HF Power
LF and HF Equalization
Line Output for Additional Speakers
90° x 45° Constant Coverage Horn
High Sensitivity, 128 dB Maximum SPL
Overload Protection
Built-in Pole Mount
Easily Suspended with Optional Rigging Kit
SF12A Part Numbers
• 120V: WH00SF12A0100
• 230V: WH00SF12A0101
www.superlux.com.tw
Rear Panel
Frequency Response
A XLR and 1/4” balanced inputs for mic or line
signals
B
B This control will determine the line input level
to be sent to built-in power amplifier. Set the
A
knob to appropriate position to avoid overdrive the speaker.
The CLIP indicator will light up when input
level control is set too high to cause distortion.
c
Turn down the level control till the distortion
is gone to make sure you get the best
Dimension
performance from the speaker.
d
c Two band EQ can offer +/-15dB boost and
cut on 12kHz and 80Hz (shelving) for perfect
363 / 14.3
sound adjustment.
mm / inch.
d An additional line output for connecting to
another active speaker
Block Diagram
623 / 24.5
378 / 14.9
Installation & Placement
Performance Match
SF12AS, 12” active subwoofer loudspeaker
Disco / Pub
Small Concert
A pair of SF12A
One SF12AS
A pair of SF12A
A pair of SF12AS
Presentations
A pair of SF12A
LINE ARRAY
SUSPENDED
Optional Accessories
Tripod Stand
model# SPS400
Connecting Plate for
horizontal array
model# AX112AR
U-Bracket Kit
model# AX112
STACKING
SPS400
AX112
ON A STAND
AX112AR
FLOOR MORNITOR
ON A WALL