Canada (English) Product Family North BP1000 Series Backpack Adapter Convert your half mask or full facepiece to a welding respirator with this welding attachment. Puts cartridges on the back, increasing service life and minimizing weight to the facepiece. Product Numbers & Ordering Information Product Numbers Details BP1002 Backpack Adapter Back pack adapter to convert your north 5500, 7700, 5400 or 7600 facepiece into a BP1000 series respirator. BP1002H Harness for BP1000 Backpack Optional harness for Backpack Adapter, BP1002. BP1002HFR Harness for BP1000 Backpack, Flame Retardant Optional fire resistant harness for Backpack Adapter, BP1002. BP1201L Backpack with 7700 Half Mask, size Large 7700 Series Half Mask with BP1002 Backpack Adapter. Size large BP1201M Backpack with 7700 Half Mask, Size Medium 7700 Series Half Mask with BP1002 Backpack Adapter. Size medium BP1201S Backpack with 7700 Half Mask, Size Small 7700 Series Half Mask with BP1002 Backpack Adapter. Size small Additional Information Facepiece, filters and cartridges sold separately Packaging Information Includes one backpack adapter. Kit with facepiece includes one 7700 Series half mask. Hazardous Materials Page 1 of 3 © Honeywell International Inc. North BP1000 Series Backpack Adapter Not Applicable Overview Key Features Cartridges are located away from the immediate contaminate area so they last longer. Connects to North 5500, North 7700, RU8500, North 5400 and North 7600 Series facepieces. Convert your half mask or full facepiece to a welding respirator with this welding attachment. Puts cartridges on the back, increasing service life and minimizing weight to the facepiece. Creates a low profile that fits easily under welding helmets and faceshields when used with half masks. Weight is balanced on the shoulders, limiting worker fatigue. Recommended Industries/Use Chemical Government Manufacturing Welding Hazards Chemical Contamination Gas, Vapors, Smoke Welding Flash Regulations Regulation - NIOSH certified for use with North 5500 and 7700 Series half masks, RU8500 half masks, and North 5400 and 7600 Series full facepieces Historical Brand North Warranty Information Honeywell Safety Products warrants the BP1000 Series to the original owner to be free from defects in materials and workmanship for a period of one (1) year from the date of original shipment from Honeywell’s factory. Honeywell’s obligation under this warranty will be, at Honeywell’s option, to repair or replace without charge the BP1000 or any of its components found by Honeywell to have been defective during the warranty period, under the following terms:1) The warranty claim is made (i) by the owner who purchased the BP1000 new from Honeywell or an authorized Honeywell Distributor, and (ii) not more than three (3) months after the end of the warranty period. 2) The BP1000 or component is found by Honeywell to have been defective in normal use and service during the warranty period of one (1) year from the date of purchase by the owner. 3) The BP1000 or component is returned freight prepaid to Honeywell, either to its factory or to a Honeywell authorized service center, and is thereafter returned to the owner freight collect. 4) This warranty does not apply to (i) any respirator or component found by Honeywell to have become defective as a result of any accident, alteration, misuse, abuse, or servicing with parts not approved by Honeywell; or (ii) deterioration or aging of any component made of rubber or other elastomer since such components can be adversely affected by undue exposure to heat, sun, water, chemicals, ozone or other deteriorating elements; (iii) ) facepiece lens, compressed-air cylinders and parts that become defective through normal use. The decision as to what constitutes normal use shall be made solely by HONEYWELL SAFETY PRODUCTS. 5) To maintain this warranty, the purchaser must perform maintenance and inspections as set forth in the Instruction Manual which shall include prompt replacement or repair of defective parts, and replacement of parts per the maintenance schedule as set forth in the User’s Instructions. THE OWNER ASSUMES ALL OTHER RISKS, IF ANY, SUCH AS THE RISK OF ANY DIRECT, INDIRECT OR CONSEQUENTIAL LOSS OR DAMAGE ARISING OUT OF THE USE OF, OR INABLILTY TO USE, THE PRODUCT. SERVICING HONEYWELL SAFETY PRODUCTS RESPIRATORS WITH PARTS NOT APPROVED BY HONEYWELL WILL VOID THIS WARRANTY AND THE NIOSH APPROVAL FOR THE RESPIRATOR UNIT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED AND MAY NOT BE VARIED OR EXTENDED EXCEPT IN WRITING BY AN AUTHORIZED OFFICIAL OF HONEYWELL SAFETY PRODUCTS Specifications Base Plate ABS (acrylonitrile butadiene styrene) plastic Breathing Tube EPDM Rubber Software Downloads Technical Info BP1002 on NIOSH Approvals Page 2 of 3 © Honeywell International Inc. North BP1000 Series Backpack Adapter http://www.honeywellsafety.com/Supplementary/Documents_and_Downloads/Respiratory_Protection /Reusable_Respirators/4294996331/1033.aspx For more information www.honeywellsafety.com TECHNICAL DATA Honeywell Safety Products USA 900 Douglas Pike Smithfield, RI 02917 Phone: 800.873.5242 www.honeywell.com CANADA 10550 Parkway Boulevard Anjou, Quebec H2W 2R2 Phone: 800.873.5242 North BP1000 Backpack Adapter NIOSH Approval Information The National Institute o NIOSH Approval Label BP1002 5400 4-16 http://www.honeywellsafety.com/Supplementary/Documents_and_Downloads/Respiratory_Protection /Reusable_Respirators/4294996334/1033.aspx Honeywell International Inc. 900 Douglas Pike Smithfield RI, 02917 USA 1-800-873-5242 5400 Series Respirator 54001 54001S 7580P100 7506N95 7506N99 7506R95 75FFP100 75FFP100NL 7581P100 7582P100 7583P100 7584P100 75852P100 75SCP100 N7500-1 N7500-2 N7500-3 N7500-4 N7500-52 75SC 7581P100L 7582P100L 7583P100L 7584P100L 7585 NIOSH Approval Label BP1002 7600 4-16 http://www.honeywellsafety.com/Supplementary/Documents_and_Downloads/Respiratory_Protection /Reusable_Respirators/4294996332/1033.aspx Honeywell International Inc. 900 Douglas Pike Smithfield RI, 02917 USA 1-800-873-5242 7600 Series Respirator 76008A 76008AS 7580P100 7506N95 7506N99 7506R95 75FFP100 75FFP100NL 7581P100 7582P100 7583P100 7584P100 75852P100 75SCP100 N7500-1 N7500-2 N7500-3 N7500-4 N7500-52 75SC 7581P100L 7582P100L 7583P100L 7584P100L 75 NIOSH Approval Label BP1002 5500 7700 4-16 http://www.honeywellsafety.com/Supplementary/Documents_and_Downloads/Respiratory_Protection /Reusable_Respirators/4294996333/1033.aspx Honeywell International Inc. 900 Douglas Pike Smithfield RI, 02917 USA 1-800-873-5242 5500/7700 Series Respirators THESE RESPIRATORS ARE APPROVED ONLY IN THE FOLLOWING CONFIGURATIONS: PROTECTION 1 550030L 550030M 550030S 770030L 770030M 770030S 7580P100 7506N95 7506N99 7506R95 75FFP100 75FFP100NL 7581P100 7582P100 7583 Training & Proper Use Refer to User Instructions for use, cleaning and storage. Technical Support 800-873-5242 © Honeywell International Inc. Page 3 of 3 © Honeywell International Inc.