Avaya Ethernet Routing Switch 3500 Series

Highlights
•
Cost effective Fast Ethernet and Gigabit Ethernet switches available in 10-and-24 port model variants.
•
Enterprise class features at SME price points with 100+ enterprise class features at price points that fit into tight capital budgets.
•
Fanless models for silent operation in open areas – ideal for classrooms, boardrooms and retail shops.
•
Avaya Ethernet Routing Switch
3500 Series
The Avaya Ethernet Routing Switch
(ERS) 3500 is a series of six highperformance compact Ethernet switches
specifically designed for SMEs, branches
and open environments outside the
wiring closet.
Figure 1: The ERS 3500 product family
A cost-effective, feature-rich solution,
the ERS 3500 Series provides both standalone and stackable
Ethernet switching perfectly suited to the unique requirements of
SMEs and remote offices.
The Avaya Ethernet Routing Switch 3500
ports and 80 Gigabits of virtual backplane
is a reliable, low-cost solution that
capacity. The ERS 3500 stackable chassis
Resilient stacking that provides pay as you grow scaling with up to 80 Gbps of virtual backplane capacity in a stack of 8 units.
provides converged services within single
architecture can also improve network
or multiple sites typically of 200 users or
availability and resiliency through hot-
less.
swap and link aggregation capabilities
in fanless mode to provide silent operation
Delivering high performance Layer 2
•
Power over Ethernet/
Power over Ethernet+ models for powered connection of IP phones and other devices
for classrooms, hospitality suites, retail
switching, Layer 3 local and static routing,
sites or other noise sensitive environments
advanced convergence and a range of
– outside of the wiring closet.
security features, the ERS 3500 provides
•
Simplified operations including 1-minute plug- and-play capabilities for IP phones, automatic QoS provisioning and intuitive management options.
•
Unique quick set-up utility that simplifies installation with IP Office.
across the stack.
It offers three models which can operate
enterprise class features at an SME price.
It also supports IEEE 802.3at Power over
It also can automate many of today’s
Ethernet Plus (PoE+) which can power IP
manual processes to simplify operations
phones, wireless access points,
and reduce costs for the cost conscious
surveillance cameras and other devices.
enterprise.
PoE+ with its 32-watt power budget
ensures investment protection for current
as well as future high-powered end points.
For environments that need upside
capacity, all ERS 3500 24-port models
support Avaya’s Stackable Chassis
Architecture. This allows up to eight ERS
3500 units to be cabled together to form
a single logical chassis with up to 200
Simplified Operations
The ERS 3500 is well suited for smaller
environments where there might be little
or no local IT staff. It is designed to be
simple to install, manage and operate.
And when deployed in conjunction with an
Avaya IP Office system the ERS 3500
avaya.com | 1
offers increased operational
simplicity over third party switching
solutions through features that both
simplify the initial deployment as well
as ongoing adds, moves and changes.
Automated switch set up with
Avaya IP Office
Figure 2: ERS 3500 with IP Office, the Avaya Flare® Communicator for
iPad Device and an Avaya 9600 handset
For deployment scenarios where
there may not be a data networking
3500 provides an automated script to
Validated interoperability with
Avaya IP Office
Certified 1-minute plug-and-play
for IP phones
enable fast, error free installation
Avaya has also validated
Plug and play means that as soon as
when deployed with IP Office. This
interoperability between the ERS
an IP phone is plugged into an Avaya
installation script called “run ip office”
3500 and the IP Office system to
Ethernet switch, the IP phone is
automates the entire set up process
ensure the two products work
automatically recognized and
on the ERS 3500 switch by utilizing
together seamlessly. This eliminates
configured. This feature can
LLDP or ADAC functionality to
any complexities associated with
dramatically simplify the roll out of IP
automatically set up voice and data
having to provision, manage and
phones and simplify ongoing adds,
VLANs, QoS and policies on the IP
troubleshoot a third party switch with
moves and changes; empowering
phones, meaning that IP Office and IP
the Avaya voice / unified
employees to move their own phones
Phones are ready to be connected
communications infrastructure. A
without the assistance of an outside
immediately. This helps ensure fast
Technical Solutions Guide, available
contractor. To enable this plug and
setup and error free deployment
to partners and end customers,
play capability, Avaya offers IEEE
according to Avaya best practices
showcases best practice
802.1AB Link Layer Discovery
and consistency between different
configurations, ensuring optimal
Protocol and LLDP-Media Endpoint
locations for large rollouts in multiple
performance of the solution.
Discovery (LLDP-MED) as well as the
support specialist on site, the ERS
branch offices.
Avaya Auto Discovery and Auto
The ERS 3500 Series models
Configuration (ADAC) feature.
Fast Ethernet Models
With LLDP enabled, the ERS 3500
ERS 3526T
24 x 10/100Mbps + 2 Combo 10/100/1000 or SFP ports +
2 SFP / 2.5G rear ports. Fanless.
ERS 3526T-PWR+
24 x 10/100Mbps PoE+ ports + 2 Combo 10/100/1000 or
SFP ports + 2 SFP / 2.5G rear ports. PoE budget 370W.
learns the identification of
neighboring devices and provides
these details to the network
management system. This enables the
Gigabit Ethernet Models
system to have the most up-to-date
physical view of the network. In
ERS 3510GT
8 x 10/100/1000Mbps + 2 SFP ports. Standalone, fanless.
ERS 3510GT-PWR+
8 x 10/100/1000Mbps PoE+ ports + 2 SFP ports.
Standalone. Fanless mode @ 60W PoE budget, Fan
operation mode @ 170W PoE budget.
ERS 3524GT
24 x 10/100/1000Mbps with 4 shared SFP ports (combo
with ports 21-24) + 2 SFP / 2.5G rear ports.
switch port. When the IP phone is
ERS 3524GT-PWR+
24 x 10/100/1000Mbps PoE+ ports with 4 shared SFP
ports (combo with ports 21-24) + 2 SFP / 2.5G rear ports.
PoE budget 370W.
configuration is automatically
2
| avaya.com
addition, ERS 3500 can dynamically
apply voice VLANs and QoS to both
the IP phone and the attached edge
moved to another location, the
updated. QoS is also automatically
provisioned on the ERS 3500 uplink
and monitoring of a single device
ensuring voice is given top priority
using either HTTP or HTTPS (Secure
into the network core. With one of
Web). The on-box embedded
the most comprehensive
version of EDM is available at no
implementations of LLDP in the
extra charge with every switch and
industry, Avaya offers enhancements
can be accessed by a standard web
for standards based provisioning of
browser. There is also an off-box
Avaya IP Phones via integrated and
version available as a free
customizable TLV support.
downloadable software plug-in that
can be installed on Avaya’s
These features not only save network
Configuration and Orchestration
operators time, they can virtually
Manager (COM) application.
eliminate the likelihood of a
provisioning error during a large IP
phone deployment. Third-party
testing conducted by Miercom1
validated that when IP phones were
plugged into an Avaya Ethernet
Switch, they were operational in just
over 1 minute.
Intuitive Management
•For customers rolling out many ERS
3500 devices, the Avaya
Configuration and Orchestration
Manager (COM) application,
simplifies multi-element
configuration via wizards and
templates – increasing consistency
and reducing the chances of error
during configuration changes. COM
also provides network discovery,
ERS 3500 Series offers flexible
device backup, bulk configuration
options for managing,
management and audits of
troubleshooting and operating your
configuration changes.
devices.
•For customers most comfortable
using the Command Line Interface
(CLI), the ERS 3500 offers an
industry-aligned CLI that is intuitive
and requires little to no formal
•SNMP-based management (SNMP
v1, v2 and v3) provides an
alternative standards-based
an interface for Configuration and
Orchestration Manager.
The Avaya ERS 3500 supports secure
Ethernet switching backgrounds.
management via IPv4 or IPv6
simple Graphical User Interface
(GUI) for management and
provisioning, Avaya’s Enterprise
Device Manager (EDM) is an
embedded web-based element
management and configuration tool
that enables set-up, configuration
• Introducing resilient stacking
on all ERS 3500 24-port
models. Up to 8 units can be
connected into a single stack
with up to 192 ports of
capacity and 80 Gbps of
virtual backplane bandwidth
• New DHCP Server support
enabling the ERS 3500 to
automatically assign IP
addresses to end-devices,
such as IP phones and PCs.
• Improved 802.1X EAP/NEAP
set-up and accounting for
more flexible configuration
and reporting.
• Enhanced storm control
providing per port granular
broadcast, multicast & unicast
packet rate control
The ERS 3500 v5.1 also
incorporates several features
from prior feature pack releases,
including:
management approach as well as
training for individuals with
•For customers who are looking for a
ERS 3500 Series
capabilities have been
enhanced with the v5.1
feature release. Key
features include:
through features such as Secure Shell
(SSHv1/2), Secure Sockets Layer
(SSL), Simple Network Management
Protocol (SNMPv1,2,3), IP Manager
Lists, and administrative
authentication via RADIUS or
TACACS+ when connecting to the
switch or stack.
• Quick Set-up for IP Office
script to automate the set-up
of IP Office systems and
phones on the ERS 3500.
With v5.1, the script has also
been enhanced to extend IP
Office set-up across multiple
ERS 3500s in a stack.
• Voice VLAN Integration that
centralizes and simplifies
Voice VLAN set-up. Functions,
such as Layer 3 routing or
static ports, can be easily
assigned across the VLAN.
avaya.com | 3
Convergence-ready
for Unified
Communications,
High-Definition Video
and more
For businesses looking to consolidate
all forms of communication – voice,
video and data – on a single
infrastructure, the Avaya ERS 3500
Series delivers functionality that
simplifies convergence of these
technologies.
Support for IEEE 802.3at PoE+ to
power your device
Through support for IEEE 802.3at
PoE+ which delivers up to 32 Watts of
power per port to end devices, ERS
3500s are able to power IP phones,
wireless LAN access points,
networked high-definition CCTV
Figure 3: ERS 3500 deployment scenario
cameras and other devices. This
eliminates the need for separate
power supplies for each unit, enabling
The 24-port PoE+ enabled products
classifies, prioritizes and marks LAN
reduced cabling and management
(ERS 3526T-PWR+ and ERS
IP traffic using up to four hardware
costs for adds, moves, or changes.
3524GT-PWR+) support a maximum
queues on every port – including the
power budget of 370 Watts and the
rear SFP ports.
The higher power budget delivered
10-port Gigabit Ethernet model (ERS
by the PoE+ standard ensures that
3510-PWR+) supports a maximum
Classification can be based on MAC
customers have the added flexibility
power budget of 170 Watts –
address, IP ToS/DSCP marking, IP
of converging video surveillance
dramatically higher than competitive
source/destination address or
traffic over the network, since pan, tilt
switches in its class – enabling it to
subnets, TCP/UDP source/destination
and zoom cameras are one of the end
deliver a concurrent average of 20
port/port range, IEEE 802.1p user
devices that require the additional
Watts of power to each of the eight
priority bits, ingress source port, IP
power provided by PoE+. It also
PoE+ enabled access ports.
Protocol ID (e.g., TCP, UDP, IGMP),
EtherType (e.g., IP, IPX) or the IEEE
ensures investment protection for
future end points, such as new
Wireless LAN Access Points (3x3
802.11n access points and emerging
802.11ac access points) as well as
next-generation video phones.
4
| avaya.com
Comprehensive QoS capabilities
The ERS 3500 series delivers
unsurpassed control for networks
supporting a wide range of different
application types. The ERS 3500
802.1Q VLAN ID. Comprehensive
traffic policing and traffic shaping are
also supported.
Intelligent stacking
solution delivering
scalability, flexibility,
resilience and
performance
No one
knows
stacking like
Avaya. We
introduced
our first Stackable Chassis product in
1998 and have been perfecting the
technology ever since. We were the
first and only vendor to break the
Terabit boundary with our ERS 5600
Series products and we have
differentiated ourselves in the industry
by ensuring that our Stackable Chassis
perform like a traditional modular
chassis implementation. We offer
genuine chassis-like features including
true pay-as-you-grow scaling and in
service maintenance and restoration.
From a management perspective, our
Stackable Chassis looks like a single
network entity – utilizing only a single
IP address.
A stack of up to eight 24-port Avaya
ERS 3500 units can be created,
enabling the Ethernet Routing Switch
3500 series to deliver up to 80Gbps
stacking throughput by scaling up
to 192 x 10/100 ports and 16 x
10/100/1000/ SFP combo ports, or
192 x 10/100/1000 ports. Stacking is
supported on ERS 3526T/ERS 3526TPWR+ and ERS 3524GT/
3524GT-PWR+ models.
High performance architecture
with true pay-as-you grow scaling
Our Stackable Chassis products
combine non-blocking internal
switching fabrics with high-speed
virtual backplane architecture for a
high performance solution that
scales proportionally as new
switches are added. The ERS 3500
series scales to a maximum of
80Gbps of virtual backplane
throughput by simply cabling up 8
units together. Avaya’s Stackable
Chassis architecture simplifies stack
management. Customers do not
have to worry about different
software versions on different
products, since all ERS 3500 units
run the same software image. The
software image is loaded onto the
base unit of the stack which then
loads the image to all the other
switches in the stack. As new units
are added to the stack, the ERS 3500
automates the software image and
configuration download process.
Third party testing1 has validated that
new ERS 3500 units can become
that Quality-of-Service settings are
honored as traffic passes over the
stacking connections – providing
applications with optimal
performance, and a positive user
experience.
All ERS 3500 24-port models come
with two in-built Stackable Chassis
interfaces for simple, cost-effective
and efficient connectivity. Unlike
comparative offerings which daisy
chain low-speed interfaces, this
design frees uplink ports for
dedicated connectivity to the
backbone. In addition to the stacking
cables, a return cable is also used to
provide full virtual chassis resiliency
and to protect against any stack
port, switch unit or cable failures.
Unlike competitive solutions which
charge large premiums for stacking,
the ERS 3500 offers the ability for
customers to utilize its Stackable
Chassis architecture without
incurring any licensing or hardware
costs.
operational in just over 2 minutes of
being cabled into the stack.
To ensure wire-speed performance,
our Stackable Chassis architecture is
based on a shortest-path forwarding
algorithm for optimal data flow
across the stack. Unlike competitive
solutions that use unwieldy logical
ring or token technology, Avaya
allows traffic to flow upstream and
downstream simultaneously from
every switch connected to the virtual
backplane, optimizing performance,
resiliency, and resource utilization.
Avaya has an additional advantage in
In-service maintenance and
restoration
Virtual hot swap, a critical
serviceability and operability
capability, helps ensure that failure in
any stacked unit is quickly and easily
avaya.com | 5
rectified. Pioneered in modular
enhances operational and
including full tracking of network
switches, virtual hot swap is available
management simplicity.
connections. Network access is
in Avaya stackable chassis solutions
where, without complex engineering,
it enables immediate like-for-like unit
replacement with no impact on other
functionality and traffic, empowering
operators to deploy our solutions just
as they would a chassis. If a failure
occurs, neighboring switches
automatically wrap their fabric
connections to help ensure that other
switches in the stack are not
granted or denied via proper MAC-
Centralized Management
From a management perspective, an
ERS 3500 stackable chassis solution
appears as a single networking entity
– utilizing only a single IP Address.
This can significantly reduce the
number of switches to be managed
within the network as a stack of up to
8 switches can be managed just as
easily as a single switch.
address identification (up to a
maximum of 448).
When advanced, policy-based and
centralized user/device authentication
is required, the Avaya ERS 3500 can
be used in conjunction with the
innovative Avaya Identity Engines
portfolio solution. This easy-todeploy, policy-based solution assigns
impacted. The failed unit is simply
network access rights and
disconnected from the fabric and,
permissions based on user role, where
without pre-staging of software or
configuration, a like unit is inserted,
cabled, and powered-up. The
Securing access at the
edge
the user connects (local or remote)
and how the user connects (wired or
wireless). In this way, each connected
Automatic Unit Replacement (AUR)
The Ethernet Routing Switch 3500
device and user are known and are
process self-manages the software
offers the highest level of security
governed by device-specific security
and configuration downloads to the
with authenticated network access
policies. For example, based on their
new switch then brings it online,
that leverages IEEE 802.1X Extensible
network credentials, an employee
without the need for an engineer to
Authentication Protocol (EAP) with
using a corporate owned device will
manage the process.
multiple extensions including support
be granted full corporate access
for Multi-Host Multi-Authentication
however, while using a non-
Further complementing the Avaya
mode (MHMA), Multi-Host Single-
corporate-owned device, they will be
ERS 3500 stacking architecture,
Authentication mode (MHSA), non
granted limited access.
Avaya supports standards-based
EAP device support (i.e. printers, etc.)
802.3ad Link Aggregation as well as
and RADIUS based MAC
As the number of employee-owned
its own Multi-Link Trunking
authentication support. Up to 32 host
devices increases, Identity Engines
technology that allows grouping of
devices per switch port are supported
can help network operators retain
ports to form high-speed trunks/
in these modes.
control by running device health
checks and verifying user and device
aggregations. These bundles or
groups of ports can be distributed
Based on the IEEE 802.1X standard,
credentials. Identity Engines helps
across different units in the same
EAP limits access to the network
ensure that network access
stack, delivering higher levels of
based on user credentials. A user is
permission levels are enforced and
resilience in case of link or switch
required to login to the network using
adhered to without undue effort on
failure to help ensure that traffic gets
a username/password; the user
the part of the IT staff. It also helps
to its destination.
database is maintained on the
ensure that consistent access and
authentication server (not the switch).
security policies are applied to all end
Stack health-check monitoring, a real-
Additionally MAC-address based
points – whether they be wired or
time, at-a-glance view of stack
security limits access to only network-
wireless.
operational status and health, further
authorized and trusted personnel,
6
| avaya.com
In addition, the Avaya ERS 3500
offers security features that actively
protect against malicious network
attacks. These include protection
from snooping of DHCP services,
verification and filtering of ARP traffic
via in-hardware processing (Dynamic
ARP inspection), restriction of IP
traffic to registered end devices (IP
Source Guard), and control of the
flow of Spanning Tree BPDUs within
the network (BPDU Filtering).
Compact Form Factors
with Flexible Installation
Options
Energy Efficiency
Lifetime Warranty
New regulations and rising awareness
Avaya includes industry-leading
of the ever-increasing cost of
warranty services for our portfolio of
electrical power keep energy
stackable switches, including Avaya
efficiency top of mind. An innovator
ERS 3500 Series products. The
in this area, Avaya has built energy
warranty includes complimentary
efficiency into many of its hardware
next-business-day shipment of failed
products. In fact, independent testing
units for the life of the product, and
indicates that Avaya LAN Switches,
ongoing technical support. This
Call Servers, Gateways, Unified
includes support for the shipped
Messaging Servers and Gigabit IP
software version, with an optional
Phones are typically more energy
Software Release Service available to
efficient than competitive equipment.
provide access to new feature
The ERS 3500 is based on highly
releases.
efficient power supplies – delivering
over 80% efficiency. 2 The ERS 3500
also supports dynamic power
The 10 port ERS 3500 models
management where each port can be
(3510GT & 3510GT-PWR+), which are
configured to limit the power
1U tall, 8.75” wide and 8” and 11” deep
delivered to a device and for power
respectively, can be installed on a
priority level—low, high, and critical.
table or shelf using rubber feet
(included), or can be wall mounted
The ERS 3500 also supports Energy
using the wall mount screws and
Efficient Ethernet in hardware. This,
anchors (also included). Additionally,
along with Avaya Energy Saver
optional rack accessory kits are
functionality, will be enabled in a
available allowing the ERS 3510GT
future software release. Together,
and ERS 3510 GT-PWR+ to be
these features can further conserve
mounted either alone or with two
energy by turning down port speeds
units side-by-side in a standard 19”
during designated off-peak hours.
Summary
Avaya is positioned to provide an
end-to-end solution for converged
networks. The Ethernet Routing
Switch 3500 series, along with other
Avaya products, can increase
profitability and productivity,
streamline business operations, lower
costs and help your business gain a
competitive edge.
rack.
The 24 port ERS 3500 can be
installed on a table or shelf or wall
mounted using the included rack
mount brackets mounted at 90
degrees, or in a standard 19”
equipment rack.
avaya.com | 7
Model Specifications
ERS 3526T
Switch Details:
24 10/100Base-TX ports, plus 2 combo 10/100/1000BASE-T or SFP ports
2 rear SFP ports can be used as additional ports in Standalone Mode, or, 2 rear HiStack ports delivering up to
10Gbps (FDX) of Stackable Chassis throughput per switch in Stacking Mode (future)
Fanless operation
System CPU speed: 400MHz
System memory: 32MB Flash, 128MB DRAM
RJ-45 Console port provides industry standard serial port connectivity
Switch capacity and forwarding rate: 12.8Gbps / 9.5Mpps
MTBF: 645,510 hrs
Dimensions:
Height: 1U or 44.5mm / 1.75”
Width: 440mm / 17.5”
Depth 280mm / 11”
Weight:
3.60kg / 8lb
Power and
Thermal:
Input voltage: 100 to 240 VAC@ 47 to 63 HZ
Input current (max): 0.28A@100VAC
Power consumption: 28.5 Watts max
Thermal rating (output): 65 BTU/hr max
ERS 3526T-PWR+
Switch Details:
24 10/100BASE-TX ports with support for IEEE 802.3af PoE or IEEE 802.3at PoE+, plus 2 combo
10/100/1000BASE-T or SFP ports
2 rear SFP ports can be used as additional ports in Standalone Mode, or, 2 rear HiStack ports delivering up to
10Gbps (FDX) of Stackable Chassis throughput per switch in Stacking Mode (future)
System CPU speed: 400MHz
System memory: 32MB Flash, 128MB DRAM
RJ-45 Console port provides industry standard serial port connectivity
Switch capacity and forwarding rate: 12.8Gbps / 9.5Mpps
MTBF: 332,778
Dimensions:
Height: 1U or 44.5mm / 1.75”
Width: 440mm / 17.5”
Depth 280mm / 11”
Weight:
4.50kg / 10lb
Power and
Thermal:
Input voltage: 100 to 240 VAC@ 47 to 63 HZ
Input current (max): 5.0A@100VAC
Power consumption: 500Watts max
Thermal rating (output): 360 BTU/hr max
Maximum power budget: 370 Watts
8
| avaya.com
ERS 3510GT
Switch Details:
8 10/100/1000BASE-T ports with 2 SFP ports
Fanless operation
Standalone
System CPU speed: 400MHz
System memory: 32MB Flash, 128MB DRAM
RJ-45 Console port provides industry standard serial port connectivity
Switch capacity and forwarding rate: 20Gbps / 14.9Mpps
MTBF: 892,667 hrs
Dimensions:
Height: 1U 44.5mm / 1.75”
Width: 220mm / 8.75”
Depth 200mm / 8”
Weight:
1.75kg / 3.9lb
Power and
Thermal:
Input voltage: 100 to 240 VAC@ 47 to 63 HZ
Input current (max): 0.18A @ 100VAC,
Power consumption: 18 Watts max
Thermal rating (output): 61 BTU/hr max
ERS 3510GT-PWR+
Switch Details:
8 10/100/1000BASE-T ports with support for IEEE 802.3af PoE or IEEE 802.3at PoE+ with 2 SFP ports
Standalone
Dual power modes - fanless operation in Low Power Budget mode @ 60W max PoE budget, or normal fan
operation in High Power Budget mode @ 170W max PoE budget.
System CPU speed: 400MHz
System memory: 32MB Flash, 128MB DRAM
RJ-45 Console port provides industry standard serial port connectivity
Switch capacity and forwarding rate: 20Gbps / 14.9Mpps
MTBF: 673,452 hrs
Dimensions:
Height: 1U 44.5mm / 1.75”
Width: 220mm / 8.75”
Depth 280mm / 11”
Weight:
2.70kg / 6lb
Power and
Thermal:
Input voltage: 100 to 240 VAC@ 47 to 63 HZ
Input current (max): 2.1A @ 100VAC
Power consumption: 210 Watts
Thermal rating (output): 156 BTU/hr max
Maximum power budget: 170 Watts
avaya.com | 9
ERS 3524GT
Switch Details:
24 10/100/1000BASE-T ports, with 4 shared SFP ports (combo with ports 21-24)
2 rear SFP ports can be used as additional ports in Standalone Mode, or, 2 rear HiStack ports delivering up to
10Gbps (FDX) of Stackable Chassis throughput per switch in Stacking Mode (future)
System CPU speed: 400MHz
System memory: 32MB Flash, 128MB DRAM
RJ-45 Console port provides industry standard serial port connectivity
Switch capacity and forwarding rate: 52Gbps / 38.7Mpps
MTBF: 657,619 hrs
Dimensions:
Height: 1U 44.5mm / 1.75”
Width: 440mm / 17.5”
Depth 280mm / 11”
Weight:
3.55kg / 7.8lb
Power and
Thermal:
Input voltage: 100 to 240 VAC@ 47 to 63 HZ
Input current (max): 0.28A @ 100VAC
Power consumption: 28.5 Watts max
Thermal rating (output): 95 BTU/hr max
ERS 3524GT-PWR+
Switch Details:
24 10/100/1000BASE-T ports with support for IEEE 802.3af PoE or IEEE 802.3at PoE+, with 4 shared SFP
ports (combo with ports 21-24)
2 rear SFP ports can be used as additional ports in Standalone Mode, or, as 2 rear HiStack ports delivering
up to 10Gbps (FDX) of Stackable Chassis throughput per switch in Stacking Mode (future)
System CPU speed: 400MHz
System memory: 32MB Flash, 128MB DRAM
RJ-45 Console port provides industry standard serial port connectivity
Switch capacity and forwarding rate: 52Gbps / 38.7Mpps
MTBF: 336,357 hrs
Dimensions:
Height: 1U or 44.5mm / 1.75”
Width: 440mm / 17.5”
Depth 280mm / 11”
Weight:
4.61kg / 10.2lb
Power and
Thermal:
Input voltage: 100 to 240 VAC@ 47 to 63 HZ
Input current (max): 5.0A@100VAC
Power consumption: 500 Watts max
Thermal rating (output): 357 BTU/hr max
Maximum power budget: 370 Watts
10
| avaya.com
Avaya Ethernet Routing Switch 3500 Series Ordering Information
ERS 3500 Series Models
AL3500?01-E6*
ERS 3526T featuring 24 x 10/100Mbps + 2 Combo 10/100/1000Mbps or SFP ports + 2 SFP / 2.5G rear ports. Fanless.
AL3500?11-E6*
ERS 3526T-PWR+ featuring 24 x 10/100Mbps PoE+ ports + 2 Combo 10/100/1000Mbps or SFP ports + 2 SFP /
2.5G rear ports. PoE budget 370W.
AL3500?04-E6*
ERS 3510GT featuring 8 x 10/100/1000Mbps + 2 SFP ports. Standalone. Fanless.
AL3500?14-E6*
ERS 3510GT-PWR+ featuring 8 x 10/100/1000Mbps PoE+ ports + 2 SFP ports. Standalone. Fanless mode @ 60W
PoE budget, Fan operation mode @ 170W PoE budget.
AL3500?05-E6*
ERS 3524GT featuring 24 x 10/100/1000Mbps with 4 shared SFP ports (combo with ports 21-24) + 2 SFP / 2.5G rear ports.
AL3500?15-E6*
ERS 3524GT-PWR+ featuring 24 x 10/100/1000Mbps PoE+ ports with 4 shared SFP ports (combo with ports
21-24) + 2 SFP / 2.5G rear ports. PoE budget 370W.
Notes:
- Each switch ships with Base software license.
- Stacking cables are not included and must be ordered separately for ERS 3500 24-port models.
- The seventh character (?) of the order number must be replaced with the proper letter to indicate desired product nationalization.
ERS 3500 Stacking Cables
AL3518001-E6
ERS 3500 46cm Stack Cable
AL3518002-E6
ERS 3500 1.5m Stack Cable
AL3518003-E6
ERS 3500 3M Stack Cable
ERS 3500 Series Accessories
AL3511001-E6
Standard set of 19” rack mount brackets - spare
AL3511002-E6
Optional accessory kit for joining two ERS 3510GT / ERS 3510GT-PWR+ switches together (side-by-side) to
mount in a 19” rack.
AL3511003-E6
Optional accessory kit for mounting one ERS 3510GT or ERS 3510GT-PWR+ switch in a 19” rack.
Technical Specifications
Avaya Ethernet Routing Switch 3500 Standards Compliance
IEEE 802.1AB Link Layer Discovery Protocol (LLDP) and LLDPMedia Endpoint Discovery (LLDP-MED)
IEEE 802.1Q VLANs
IEEE 802.1p Priority Queues
IEEE 802.1D Spanning Tree
IEEE 802.1w Rapid Spanning Tree
IEEE 802.1s Multiple Spanning Tree Groups
IEEE 802.1X Ethernet Authentication Protocol (EAP)
IEEE 802.3 10BASE-T/ 100BASE-TX
IEEE 802.3u 100BASE-T (ANSI) Auto-Negotiation
IEEE 802.3x Pause Frames / Flow Control
IEEE 802.3z 1000BASE-X
IEEE 802.3ab 1000BASE-T
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.3af Power over Ethernet – PoE (15.4W)
IEEE 802.3at Power over Ethernet plus – PoE+ (32W)
RFC 783 Trivial File Transfer Protocol (TFTP)
RFC 791/950 Internet Protocol (IP)
RFC 792 Internet Control Message Protocol (ICMP)
RFC 826 Address Resolution Protocol (ARP)
RFC 854 Telnet Server and Client
RFC 951 / 1542 BOOTP
RFC 1112 Internet Group Management Protocol v1
RFC 1213 MIB-II
RFC 1215 SNMP Traps Definition
RFC 1271 / 1757 / 2819 RMON
RFC 1361 / 1769 Simple Network Time Protocol (SNTP)
RFC 1493 Bridge MIB
RFC 1573 / 2863 Interface MIB
RFC 1643 / 2665 Ethernet MIB
RFC 1905 / 3416 SNMP
RFC 1906 / 3417 SNMP Transport Mappings
RFC 1907 / 3418 SNMP MIB
RFC 1945 HTTP v1.0
RFC 1981 Path MTU Discovery for IPv6
RFC 2011 SNMP v2 MIB for IP
RFC 2012 SNMP v2 MIB for TCP
RFC 2013 SNMP v2 MIB for UDP
RFC 2131 DHCP Client
RFC 2132 DHCP Options 6, 43 & 60
RFC 2138 RADIUS
RFC 2236 Internet Group Management Protocol v2
RFC 2460 Internet Protocol v6 (IPv6) Specification
RFC 2461 Neighbor Discovery for IPv6
RFC 2462 IPv6 Auto-configuration of link local addresses
RFC 2474 Differentiated Services Support
RFC 2570 / 3410 SNMPv3
RFC 2571 / 3411 SNMP Frameworks
RFC 2572 / 3412 SNMP Message Processing
RFC 2573 / 3413 SNMPv3 Applications
RFC 2574 / 3414 SNMPv3 USM
RFC 2575 / 3415 SNMPv3 VACM
RFC 2576 / 3584 Co-existence of SNMP v1/v2/v3
RFC 2616 HTTP
RFC 2660 HTTPS (Secure Web)
RFC 2665 Ethernet MIB
RFC 2674 Q-Bridge MIB
RFC 2737 Entity MIBv2
RFC 2819 RMON MIB
RFC 2863 Interfaces Group MIB
RFC 2866 RADIUS Accounting
RFC 2869 RADIUS Extensions (interim updates)
RFC 3046 (& 5010) DHCP option 82, Relay Agent Information
Option
RFC 3058 RADIUS Authentication.
RFC 3361 DHCP Option 120 SIP Servers
RFC 3376 Internet Group Management Protocol v3
RFC 3576 RADIUS Change of Authorization
RFC 4007 Scoped Address Architecture
RFC 4193 Unique Local IPv6 Unicast Addresses
RFC 4252 SSH
RFC 4291 IPv6 Addressing Architecture
RFC 4301 Security Architecture for the Internet Protocol
RFC 4432 SSHv2 RSA
RFC 4443 Internet Control Message Protocol (ICMPv6) Update to
RFC2463
RFC 4675 RADIUS Attributes for VLAN and Priority Support
RFC 5859 TFTP Server DHCP option
avaya.com | 11
General Performance
Switch Fabric performance: 12.8Gbps to
52Gbps
Frame forwarding rate: 9.5 to 38.7Mpps
Latency (64 byte packet LIFO): 2.4 to 3.6
microseconds (GE ports all models) and 7.9
microseconds (FE ports on the ERS 3526T/ERS
3526T-PWR+)
Frame length: 1522 bytes (including Q tag)
Jumbo Frame support: up to 9216 octets
MLT / 802.3ad LACP: 6 groups with 4 active
trunks
•Acoustic noise (dB): ERS 3510GT => 0; ERS 3510GT-PWR+ => 36.4; ERS 3524GT = > 36.1; ERS 3524GT-PWR+ => 40; ERS 3526T => 0; ERS 3526T-PWR+ => 40.
•Operating humidity: 95% RH non condensing
•Storage humidity: 95% RH non-
condensing
•No nearby heat sources such as hot air vents or direct sunlight
•No nearby sources of severe electromagnetic noise
Concurrently configured VLANs: 256
•No excessive dust
Egress queues: 4
•Adequate power source within six feet; one 15-Amp circuit required for each power supply.
Multiple Spanning Tree Groups: 8
MAC Address: up to 16,000
DHCP Snooping: up to 512 entries
•At least 5cm (2”) on each side of the switch unit for ventilation
802.1X Clients per port: 32
ARP Entries: up to 512
IP Interfaces: up to 32
RMON entries per port: 4 groups
ADAC (IP Phones): 32 per port
QoS filters per precedence: 256
QoS precedence: 4
QoS filters per switch: 1024
Pluggable Interfaces
100BASE-FX SFP up to 2km reach over MMF
(Duplex LC)
1000BASE-T SFP up to 100m over CAT5E or
better UTP Cable (RJ-45)
1000BASE-SX SFP up to 550m reach on MMF
(Duplex LC)
1000BASE-LX SFP up to 550m reach on MMF,
and up to 10 km on SMF (Duplex LC)
1000BASE-XD CDWM SFP up to 40 km reach
on SMF (Duplex LC)
About Avaya
Avaya is a global
provider of business
collaboration and
communications
solutions, providing
unified communications,
contact centers,
networking and related
services to companies
of all sizes around
the world. For more
information please visit
www.avaya.com.
12
| avaya.com
1000BASE-ZX CDWM SFP up to 70 km reach
on SMF (Duplex LC)
1000BASE-EX SFP up to 120 km reach on SMF
(Duplex LC)
Safety Agency Approvals
•IEC 60950 International CB Certification
•EN 60950 European Certification
•UL60950 US certification
•CSA22.2, #60950 Canadian Certification
•NOM Mexican Certification
Electromagnetic Emissions
and Immunity
•CISPR22, Class A/CISPR24 International
•EN55022, Class A/EN55024 European
•FCC, Part 15, Class A US Certification
•ICES-003, Class A Canadian Certification
•AN/NZS 3548 Australian/NZ Certification
•BSMI - Taiwan - CNS 13438, Class A
•MIC - Korea - MIC, No. 2001-116
•VCCI Class A Japanese Certification
1000BASE-BX SFP up to 10 and 40 km reach
variants on SMF (LC)
Miercom Lab Testing Summary Report “Plug
and Play” Switches Aug.2011.
1
Environmental
Specifications
•Operating temperature: 32° and 122° F (0° and 50° C)
2
Based on Avaya testing
•Operating altitude: 10,000 ft.
•Storage temperature: -40C to 70C
•Storage altitude: 10,000 ft
© 2013 Avaya Inc. All Rights Reserved.
All trademarks identified by ®, ™, or SM are registered marks, trademarks, and service marks, respectively, of Avaya Inc.
03/13 • LB7028-04
Download PDF
Similar pages
ers (enterprise recovery systems)
2016 Jeep Cherokee Owner`s Manual
User Manual - san telequip
BAR(U) 1000-66
How to Label Speed Dial or BLF Button on Avaya
fleetwood - PizzaOvens.com
Proel DHPA170