Setting up eduroam on Apple iOS devices

Setting up eduroam on Apple iOS devices
Step by step instructions on setting up eduroam on Apple iOS 6+ devices
Note: You must use the Safari browser for this setup.
Step 1
Follow the link to download and install the iOS profile
Step 2
Clink on the Install button, ignore the warning and click Install. You may be asked for a passcode.
This is the passcode for the iOS device
Step 3
On the Enter Username screen, enter your UCD Connect username (add @ucd.ie to the end of it)
and click Next
Step 4
On the Enter Password screen, enter your UCD Connect password and click Next
Step 5
The Profile Installed screen will appear. Click Done.
Step 6
Open the Settings app, Choose Wi-Fi and select eduroam from the Choose a Network… list. If the
Certificate screen pops up choose Accept
A successful connection has been made when a blue tick appears beside the name eduroam
Potential issues:
In certain situations a connection may be unsuccessful. Open the Settings app, Choose Wi-Fi and
press the blue button with the white arrow, to the right of the name eduroam. Turn off Auto-Join.
Press the Wi-Fi Networks button to return to the previous screen. Select eduroam from the Choose
a Network… list. You will be prompted for your UCD Connect username and password each time a
connection is made. Once a successful connection has been made, a blue tick will appear beside the
name eduroam
Using eduroam outside UCD
All usernames will have to contain the home institution’s realm name. Here at UCD our realm is
'ucd.ie'.
When authenticating to eduroam you should use username@ucd.ie where "username" is your UCD
Connect username. The realm (the part after the "@") is always "ucd.ie" for both UCD staff and
students. The password used should be your UCD Connect password. Any fields labelled "domain"
should be left blank