Tech Spec for RoboTRAK Presenter Tracking System

Tech Spec
RoboTRAK
Presenter Tracking System
North America: 999-7270-000
Europe and UK: 999-7270-001
Australia and New Zealand: 999-7270-009
Features
n
n
n
n
n
IR-based presenter tracking for medium to large rooms
Designed for educators, in consultation with educators, using Vaddio's proven,
industry-leading technology
Reliable tracking: Move around, turn your head, invite others to the front of the room... the camera stays on you
Switch between tracking and preset positions
Camera sold separately – use with the RoboSHOT™ camera of your choice
IR Camera
n
n
n
Simple configuration and administration using the Vaddio web interface
Adjust the system's tracking behavior to match the presenter's style
Operational range of 12 to 50 ft (3.7 to 15.2 m), any height from 6 to 15 ft. (1.8 to 4.6 m)
IR Source Lanyard
n
n
n
No belt pack – comfortable, highly wearable design that does not interfere with clothing
Up to 40 hours of battery power; 25 hours typical
Recessed switch for full power-down – Conserve battery life during storage; no risk of accidental actuation
Connectors
n
n
n
12 VDC, 3.0 Amp power connector – Connect only the PoE splitter shipped with the camera.
Network/PoE+ – 10/100 Ethernet/PoE+ port allows the RoboTRAK™ IR camera to control the video camera,
and provides access to the web interface.
DIP switches – Factory use only.
What's Included
Each RoboTRAK presenter tracking system is shipped with these items:
n RoboTRAK IR camera with dual-camera wall mount
n RoboTRAK IR source lanyard
n 5 VDC USB charger with cable
n PoE+ injector with AC cordset(s) and Cat-5e cable
n PoE splitter with cables
n Quick Start Guide
Document Number 342-1230 Rev C – October 2016
Tech Spec for RoboTRAK Presenter Tracking System
How It Works
Elements of the tracking system:
n IR source – The presenter wears an infrared signal source on a lanyard.
n IR camera – Follows the lanyard and directs the video camera.
n Video Camera (sold separately) – Follows the IR camera. Any RoboSHOT
camera may be used as the video component of the RoboTRAK system.
Basic Connection Diagram
Specifications
IR Camera
Operational Distance
12 to 50 ft (3.7 to 15.2 m)
Peak IR Sensitivity
850 nm
Horizontal range
±90°
Vertical Placement
7 to 15 ft (2.1 to 4.6 m)
Max. Vertical Offset
20°
Position Presets
10
Communication
10/100 Ethernet
Power
12 VDC, 3.0A
Height
6.3 in (163 mm)
Depth
5.5 in (145 mm)
Width
6.1 in (155 mm)
Weight
3.0 lbs (1.36 kg)
Battery Life
Up to 40 hrs (25 typical)
Charging time
About 4 hrs
Diameter
2 in (51 mm)
Depth
1.0 in (25 mm)
Weight
3.2 oz (91 g)
Lanyard length
24 in (610 mm)
Mounted to Ceiling
16.7 to 17.8 lbs (7.55 to 8.05 kg)
IR Source Lanyard
System Mounting Weight
15.3 to 16.4 lbs (6.95 to 7.45 kg)
Mounted to Wall
Weight varies depending on the video camera used.
Environmental and Room Requirements
Operating temperatute
0 °C to +24°C (32°F to 75°F)
Storage temperature
-5° to +60° C (23°F to 140°F)
Operating humidity
15% to 80% RH
Storage humidity
20% to 80% RH
(non-condensing)
Lighting Restrictions
(non-condensing)
No natural or halogen-based lighting, no IR-based communication systems
Video Camera – see specifications for the purchased camera