HDBaseT Extender for HDMI with Bi

HDBaseT Extender for HDMI
with Bi-Directional IR (IN/OUT) and POL
GTB-HDBT-POL
HDBaseT® Extender for HDMI using one CAT-5e or CAT-6 cable up
to 230 feet (70 meters)
The GefenToolBox Extender for HDMI with POL extends HDMI up to 230 feet
(70 meters) using one CAT-6 cable or up to 198 feet (60 meters) using one
CAT-5e cable. Resolutions up to 1080p Full HD with multichannel digital audio
are supported. This product provides Bi-Directional IR extension between the
Sender and the Receiver unit, allowing the transfer of IR commands from one
remote location to the other. Bi-Directional IR can be used to control A/V sources
placed near the Sender unit and to send IR automation commands to devices
placed near the Receiver unit. Gefen POL (Power Over Line) technology powers
the Receiver unit using the same CAT-5e or CAT-6 cable that extends the HDMI
signal from the Sender unit. This feature eliminates the need for an external
power supply at the Receiver unit which helps to simplify installation.
How It Works
Connect the Sender unit to the Hi-Def source using an HDMI cable. Use another
HDMI cable to connect the Receiver unit to the HDTV display. Connect a single
CAT-6 cable up to 230 feet (70 meters) or CAT-5e cable up to 198 feet (60
meters) between the Sender and Receiver units. Connect the included 24V DC
power supply in to the Sender unit and plug the power supply to an available
electrical outlet. Power to the Receiver unit is delivered from the Sender unit over
the CAT-5e/6 cable using Gefen POL technology. To control the Hi-Def source
from the display location, connect an IR Extender (Gefen part no. EXT-RMTEXTIRC) to the Ext IR connector on the Receiver unit. Connect an IR emitter
(Gefen part no. GTB-IREMIT) to the IR Out of the Sender unit and place the IR
emitter over the IR sensor of the Hi-Def source. Point the IR remote at the IR
Extender to control the Hi-Def source. For IR control of a device placed near the
Receiver unit (such as the display), connect the IR output from an automation
device (such as the Gefen PACS or Mini PACS) to the IR In connector on the
Sender unit. Connect an IR emitter (Gefen part no. GTB-IREMIT) to the IR Out on
the Receiver unit and attach the IR emitter to the IR sensor of the device being
controlled.
Note: Shielded (STP) CAT-5e or CAT-6 is recommended. Unshielded
(UTP)CAT-5e or CAT-6 may be acceptable depending on cable quality but is not
the top choice. Care should always be given to keep these cables away from
lines and other electromagnetic interference sources.
POL (Power Over Line) technology from Gefen sends power to the Receiver unit
over the same CAT-5e/6 cable that is used for extending the HDMI signal.
HDBaseT® technology allows HDMI, IR (Bi-directional), and power to be sent on
one CAT-5 cable.
Features*
• Extends HDMI and 3DTV up to 230 feet (70 meters) over a single
CAT-6 or up to 198 feet (60 meters) over a single CAT-5e
• HDMI Features Supported:
• Resolutions up to 1080p Full HD
• 12-bit Deep Color
• HDCP-compliant
• LPCM 7.1 audio, Dolby® TrueHD, Dolby Digital® Plus, and
DTS-HD® Master Audio™
• 3DTV pass-through
• CEC pass-through
• Lip Sync pass-through
• Bi-Directional IR remote control of devices
• Gefen POL feature provides power to the Receiver unit over the CAT-5e
• Uses HDBaseT® technology
• HDCP-compliant
• Locking power connector
• Easy surface mounting
• Available in Black and White finishes
Specifications*
•
•
•
•
•
•
•
•
•
•
•
Maximum Pixel Clock: 225 MHz
Video Input Connector (Sender): (1) HDMI Type A 19-pin, female, locking
Video Output Connector (Receiver): (1) HDMI Type A 19-pin, female, locking
Link Connectors (Sender/Receiver): (1) RJ-45, shielded
Power/HDCP Indicator LED: Bi-color: Blue/Amber
IR Extender port (Receiver): 3.5mm mini-stereo jack
IR Out port (Sender / Receiver): 3.5mm mini-mono jack
IR In port (Sender): 3.5mm mini-mono jack
Power Supply: (1) 24V DC, locking
Power Consumption: 24W (max.)
Dimensions (W x H x D) (Sender / Receiver): 4.3” x 1” x 3.2”
(110mm x 26mm x 80mm)
• Shipping Weight: 4 lbs. (1.8 kg)
®
1080P
Gefen, LLC
20600 Nordhoff Street, Chatsworth CA 91311
Tel. (818) 772-9100 (800) 545-6900 Fax (818) 772-9120
www.gefentoolbox.com
*Features and specifications are subject to change without notice.
All trademarks and registered trademarks are properties of their respective owners
REV. A3