H4S1P HIGH DEFINITION 720p VFAI LENS DAY/NIGHT H.264

H4S1P
www.honeywellvideo.com
HIGH DEFINITION 720p VFAI LENS DAY/NIGHT
H.264 RUGGED INDOOR/OUTDOOR MINIDOME IP CAMERA
Honeywell’s latest addition to the Performance Series of IP-based products, the H4S1P is a
720p resolution, Day/Night rugged indoor/outdoor fixed minidome network camera engineered
to provide extremely crisp images at minimal bandwidth. The H4S1P provides 720p
resolution at full frame rate. Progressive scan technology and 2D edge enhancement provide
outstanding clarity and definition. Digital Noise Reduction (DNR) results in significant storage
savings without sacrificing image quality in low light. The ¼" progressive scan CMOS sensor
offers the latest in digital video surveillance technology with accurate color rendition through
a wide variety of lighting conditions. The H4S1P also supports the ONVIF specification for
interoperability between network video products.
The H4S1P integrates a camera and lens in an ultra compact, single piece, vandal-resistant
unit for fast and easy installation in any application. The camera is designed to be surface
mounted. Wall and pendant mount kits are also available.
A 3D axis gimbal capable of 360° of pan, 180º of tilt and 360º of horizontal rotation simplifies
mechanical camera adjustment. The varifocal auto iris lens allows the field of view to be
adjusted to suit the scene requirements.
A powerful and intuitive web client allows fine tuning of the camera and the auto iris levels.
The H4S1P supports dual video streams and multiple compression formats with frame rates
up to 30 frames per second (25 fps for PAL systems). The compression parameters for the
two video streams are independently configurable. The primary stream is dedicated to H.264.
The secondary stream can be configured for H.264 or MJPEG. The H4S1P features analog
video out for aiming and focusing during setup.
With built-in low current Power over Ethernet (IEEE 802.3af), power is supplied to the camera
using standard network cabling, eliminating the need for a separate power supply and
associated wiring. In retrofit situations where PoE support does not exist, the unit can also be
powered directly from 24 V AC.
Market Opportunities
The H4S1P is perfect for installations where excellent picture clarity at minimal bandwidth is
required. At three times the resolution of standard analog cameras, yet with similar bandwidth
requirements, the H4S1P can be retrofitted on many existing DVR/NVR installations without
requiring additional storage. It’s discreet, vandal-resistant, outdoor design is impact resistant
and offers maximum protection against dust, dirt, and water. This provides optimum
performance for both indoor and outdoor applications.
Features
• Outstanding
image quality, 720p
(1280 x 720) resolution
• 30 fps (25 fps PAL) progressive scan
• Dual
digital video streams,
independently configurable,
H.264 and/or H.264/MJPEG
• Day/Night, 3.3 – 12 mm VFAI lens
• Remote firmware updates
• Web
server for remote setup of camera
video and network parameters
• Camera tamper detection
• Supports
both dynamic and static IP
address assignment
• Choice
of 24 V AC or PoE IEEE 802.3af
power inputs
• NTP time synchronization support
• Date/time
stamp embedded into
video stream
• Single model for surface mount applications
• ONVIF support
• Multiple browser support
• Wall and pendant mount kits available
• Video motion detection
• Includes
advanced IP locator software to
make system setup easy
• Rugged polycarbonate dome
H4S1P
www.honeywellvideo.com
SPECIFICATIONS
Like all cameras in the Performance Series, the H4S1P network camera uses Honeywell technology for camera video motion detection,
tamper detection, remote firmware updating and for secure storage of all camera settings. Video motion detection recognizes object
motion within the field of view; then a simple on-screen notification alerts the user. Camera tamper detection notifies the user when a
camera’s field of view is altered, blinded, or blurred. This ensures the video’s integrity and alerts the customer to either a live event or a
system problem that is causing disruption to the video stream. Honeywell’s technology also allows users to remotely upload firmware
to the camera. Setup is quick and easy and can be customized through a web client or from an NVR or DVR. The built-in web server
provides password protected access to the camera’s video and network setup.
System Diagram
Hybrid DVR
Monitor
NETWORK
Analog out
NVR
Keyboard
equIP® Series
Cameras
Performance Series
Cameras
Monitor
Monitor
H4S1P
www.honeywellvideo.com
SPECIFICATIONS
Operational
Environmental
Video Standard
NTSC, PAL
Scanning System
Progressive scan
Image Sensor
1/4" CMOS
Number of Pixels
(H×V)
1280 x 720
Minimum
Illumination
0.25 lux @ 50 IRE, F1.6
0.11 lux @ 30 IRE, F1.6
Video
Compression
Dual stream H.264 and MJPEG
Automatic Lens
Control
DC Iris Level 1-25
Video Output
(AUX)
1.0 Vp-p @ 75 ohms
S/N Ratio
50 dB or more (AGC off)
Primary Stream
Resolution
1280 x 720
800 x 450
640 x 360
320 x 180
H.264 Bitrate
(Typical)*
1.8 Mbps
1.2 Mbps
0.6 Mbps
0.21 Mbps
Auto Gain
Control
Off/On, selectable (10-40 dB)
Frame Rate
NTSC/PAL
Up to 30/25 fps video in all resolutions
Automatic
Electronic Shutter
1/60-1/24,500 sec (NTSC)
1/50-1/24,500 sec (PAL)
Lens Type
3.3-12.0 mm
Varifocal Auto Iris, F1.6
Video
Streaming
Dual streaming: H.264 and MJPEG
Controllable frame rate and bandwidth
Constant or variable bit rate
White Balance
AWC, AWC Push, Manual
Security
Multiple user access levels with
password protection
Video Access
from Web
Browser
Full control of all camera settings available
to administrator
Minimum
Web
Browsing
Requirements
Pentium IV CPU 3.1 GHz or faster,
1 GB RAM (32-bit) or 2 GB RAM (64-bit),
Windows® XP SP3, Windows 2003 Server
R2 (32-bit), Windows 7 (32-/64-bit),
Windows Vista SP1,
Windows 2008 R2 (64-bit),
Internet Explorer 8 or 9
Mozilla Firefox® and Google Chrome
Installation and
Management
Maintenance
Honeywell IP Utility software identifies the IP
address, checks status of device, firmware
upgrades over HTTP
Supported
Protocols
HTTP, TCP, RTSP, RTP, UDP, ARP, DNS, NTP,
RTCP, FTP, ICMP, DHCP, Bonjour, IGMP, SSH
Standards
ONVIF support
Electrical
Input Voltage
24 V AC, PoE IEEE 802.3af
Input Range
17–28 V AC
Surge Suppression
1.5 kW transient
Power
Consumption
3.5 W (max) 24 V AC
PoE: PD Type 1 Class 1
Mechanical
Dimensions
(W × H)
6.1" x 4.6" (154.9 mm x 117.1 mm)
Weight
3.0 lb (1.3 kg) camera only
Construction
Housing: Die cast Aluminum
Finish: Cool Gray Powder Coat
Dome: Polycarbonate
Connector
Video Output (AUX): 2-pin Molex connector
Power Input: Removable screw block
Network: RJ45 connector
Temperature
Operating: -4°F to 122°F (-20°C to 50°C)
Storage: -40°F to 158°F (-40°C to 70°C)
Relative Humidity
0% to 85%, non-condensing
Rating
IP66
IP Specifications
Frame Rate
30/25
30/25
30/25
30/25
Storage/
Day (GB)
18.98
12.65
6.33
0.89
Regulatory
Emissions
FCC Part 15B, CE (EN55022)
Immunity
CE (EN50130-4)
Safety
EU: EN60950-1
North America ETL listed to UL/CSA 60950-1
* Actual bitrate is scene and motion dependent with H.264 stream.
H4S1P
www.honeywellvideo.com
SPECIFICATIONS
System Integration
Accessories
Open IP Integration
Housing and Mounts
ONVIF support and open API for software integration. Refer to
www.onvif.org for the ONVIF specification and the Honeywell
Open Technology Alliance (http://www.security.honeywell.com/
hota) to learn more about our open and integrated solutions.
HD4CHIP-PK
Pendant Mount Bracket
HD4CHIP-WK
Wall Mount Bracket
H4S1P Dimensions
"
4.09 mm)
.0
(104
"
2.05 )
mm
(52.0
4.61"
117.5 mm
2.64"
67.0 mm
1.81"
46.0 mm
6.1"
154.97 mm
"
3.54 m)
m
(90.0
HD4CHIP-PK Pendant Mount
HD4CHIP-WK Wall Mount
7.65" (194.4 mm)
Ordering
H4S1P1
Network, Day/Night Rugged Fixed Minidome Camera, 1/4" Progressive Scan, CMOS, 720p Resolution,
3.3-12 mm VFAI lens, 24 V AC or PoE IEEE 802.3af, H.264, NTSC
H4S1P1X
Network, Day/Night Rugged Fixed Minidome Camera, 1/4" Progressive Scan, CMOS, 720p Resolution,
3.3-12 mm VFAI lens, 24 V AC or PoE IEEE 802.3af, H.264, PAL
NOTE: Honeywell reserved the right, without notification, to make changes in product design or specifications.
For more information:
www.honeywell.com/security
Automation and Control Solutions
Honeywell Security Products Americas
2700 Blankenbaker Pkwy, Suite 150
Louisville, KY 40299
1.800.323.4576
www.honeywell.com
L/H4S1P/D
March 2013
© 2013 Honeywell International Inc.
5.48" (139.3 mm)
4.65" (118.0 mm)
6.4"
(163.5 mm)
4.61"
(117.1 mm)
2.64"
(67.0 mm)
1.81"
(46.0 mm)
1.81"
(46.0 mm)
6.1"
(156 mm)