ICL-B1410
IMPERX ICL-B1410 is an advanced progressive scan, fully programmable CCD camera designed for imaging applications that require
high quality images, powerful features and flexibility. The camera is small, light weight, and built around Sony´s ICX-285 6.45 micron
interline transfer CCD image sensor with a 2/3” optical format.
IMPERX ICL-B1410 provides an image resolution of 1392 x 1040 and delivers up to 30 frames per second at full resolution. The
camera’s 14 bit internal data image processing engine is based on an industrial grade high-speed, high-density FPGA, enabling a
broad standard feature set and easy implementation of demanding custom imaging solutions. The thermally optimized, mechanical and
electrical design plus the extended operating temperature range (-40°C to +85°C), and high MTBF of 660,000 hours @ 40C, make this
Camera Link® camera a perfect fit for the most demanding industrial, medical, scientific and military applications. This camera is also
available with CoaXPress or GigE Vision® interfaces.
Features
1392/1360 x 1040/1024
Mono or color 8, 10, 12, 14 or RGB 24 bit single output
Normal and over-clock operation (23/30 fps)
Base Camera Link
RS232 serial communication
Analog and digital gain and offset control
1x, 2x, 3x, 4x, 8x horizontal and vertical binning
Eight (8) independent horizontal and vertical AOIs
Programmable horizontal and vertical resolution
Programmable line time, frame time and speed
Programmable external trigger
Internal/External exposure control
Standard, fast, frame accumulation, double and asynchronous triggering modes
Automatic gain, exposure and iris control
APPLICATIONS
Aerial Mapping
Aerial Robots: Military, Police
Aerospace
Agriculture
Automation
Automotive
Biometrics
Broadcasting
Printed Circuit Board (PCB)
Electronics
Energy/Solar/Wind Power
Flat Panel Inspection
Food/Beverage
Homeland Security
Law Enforcement
Intelligent Traffic Systems (ITS)
Medical Devices/Imaging
Automatic white balance
Internal/External H and V sync input/output
Left/right digital bit shift
Test image with image superimposition
Built in pulse generator
Programmable I/O mapping
Dynamic transfer function correction
Dynamic black level correction
Defective and hot pixel correction (static/dynamic)
Temperature monitor
Field upgradeable firmware
Customer defined Look Up Table (LUT)
Reverse image (H mirror) (optional)
MTBF of 660,000 hours @ 40°C
Metrology
Microscopy
Military/Defense
Pharmaceuticals
Particle Image Velocimetry (PIV)
Radiology
Robotics
Scientific Apps
Surveillance
Semiconductors
Transportation
Textile/Apparel
BOBCAT ICL-B1410 Specifications
Maximum Resolution
Sensor Type
Pixel Size
Frame Rate
Max Frame Rate
Minimum S/N ratio
Video Output
Output Format
Binning H & V
Area of Interest
Shutter Speed
Long Integration
Gamma Correction
Video Gain
Exposure and AGC
Iris Control
Strobe Output
Image Overlay
RS232 Interface
1392 x 1040
ICX-285 , CCD, 2/3” optical format
6.45 µm
23/30 fps (normal/overclock)
190 FPS
60 db
Base Camera Link, mini CL interface, PoCL
Mono or color 8, 10, 12, 14 or RGB 24 bit single output
x1, x2, x3, x4, x8
8 independent AOIs, 2 x 2 to 1392 x 1040
1/250,000 to 1/23 sec (nom)
Up to 16 sec
G=1.0, G= 0.45, user upgradable LUT
36 dB range, 1024 steps, 0.0351 dB per step
Manual, Auto, Programmable
Auto, Programmable
Programmable position and duration
Yes, Programmable
Yes
Order Options:
Power and I/O Interface:
1
2
3
4
5
6
12V DC Return
+12V DC
IRIS VCC
IRIS Video
IRIS Return
OUT1/2 Return
Data Corrections
DPC, HPC, LUT
Hardware Trigger
LVTTL or TTL via IN1/IN2, level, edge,
pulse-width, programmable
Software Trigger
Software internal, level, edge,
pulse-width, programmable
Trigger Modes
Programmable, standard, double exposure,
fast, frame accumulation, asynchronous
Min. Illumination
0.2 Lux, F/1.4
Supply Input Range
12 VDC, (10V min, 15V max)
Power Consumption
2.1 W, 230 mA steady, 1.5 A inrush
Size (W x H x L) 46 x 46 x 39mm
Weight 142g
Lens Mount
C-Mount
Vibration, Shock
10G (20 - 200) Hz XYZ, 70G
Environmental
Operation (-40° to +85°)C
Storage (-40° to +90°)C
Humidity
10% to 90% non-condensing
MTBF
660,000 hours @ 40°C
Regulatory
FCC 15 part A, CE, RoHS
7
8
9
10
11
12
OUT1 Signal
IN1 Signal
IN2 Signal
IN1/2 Return
Reserved
OUT2 Signal
Connector: Hirose HR 10A-10R-12PB(71)
Spectral Response
ICL-B1410M-SCO Monochrome Camera Link Output
ICL-B1410C-SCO Color Camera Link Output
For specific details and ordering information, consult the camera user’s
manual or contact IMPERX at sales@imperx.com.
Accessories:
PS12V04: Power Supply (sold separately)
Software/Drivers/Interface
IMPERX | 6421 Congress Avenue | Boca Raton | FL 33487 | USA
Phone: +1-561-989-0006 | 1-866-849-1662 | Fax: +1-561-989-0045
www.imperx.com | sales@imperx.com
Copyright © 2012, Imperx, Inc. Product information subject to change without notice. Rev. 4, 3/2012
Mechanical Dimensions
Download PDF
Similar pages
ICL-B0620
ICL-B1610
ICL-B1621
ICX-B1410
Imperx: T8882
imperx - Pyramid Imaging
ICL-B4820
ICL-B1020
ICL-B6640
IGV-B1920
IMPERX - Lambda Photometrics
VCE-PRO-Custom
cheetah - Imperx