SIP-Link
Video Wall Controller Solutions
SIP Bus Link Board
DESCRIPTION
For systems that require an extension of the SIP video bus
into an expansion chassis.
The SIP-Link Board allows you to expand the SIP video bus
from your PC and/or an Expansion Chassis to a second Expansion Chassis by converting the SIP video bus to dual link
DVI.
Simply plug one SIP-Link Board into the first PC or Expansion
Chassis in the last PCI slot in the SIP bus chain and connect
to the Mosaic-SQ16 or Mosaic-HQ using the SIP-Cable. The
SIP Link Board then transmits the SIP bus, via a dual link DVI
cable to a receiver on the second SIP-Link Board which is the
first board in the SIP bus chain in your expansion
chassis. The receiving SIP-Link Board is then connected to
your Vantage4-SIP cards.
SIP-LINK KIT
• 2 x SIP-Link Boards
• 2 x SIP Cables
• 1 x Dual Link DVI Cable
SPECIFICATIONS
Board Format
32bit 66Mhz PCI adapter
(Uses power only, no drivers required)
Board Size
105mm x 310mm. Full size
Power Requirements:
Transmitting Board
+5V @ 550mA
+3.3V @ 650mA
Receiving Board
+5V @ 750mA
+3.3V@ 800mA
Operating temperature
0 to 35 Deg C / 32 to 95 Deg F ambient
Storage temperature
-20 to +70 Deg C / -4 to 158 Deg F
Relative humidity
5% to 90% non-condensing
MAIN SALES DEPARTMENT
Datapath Limited,
Alfreton Road
Derby, DE21 4AD
England
Tel: (+44) (0) 1332 294441
Fax: (+44) (0) 1332 290667
email: sales@datapath.co.uk
Web: http://www.datapath.co.uk