King 尼康说明书enPSM36

King Basic
Name of each part
Transmitter
Wireless System
Instruction Manual
System Mode
Digital FSK 2.4GHz
Distance Range
100M
Wireless Channel
7
{
Performance
Flash Mode
Group setting
button (GP SET)
Gr oup
{Indicator
Channel
Indicator
Sticker
I-TTL、TTL、M , multi flash
Sync Mode
1st Curtain, 2nd Curtain, High Speed Sync,
Red-eye reduction
Group Control
3 different groups (7 different combinations)
Function
King supports flash zooming, focal length, ISO,
shutter speed, FV lock and FP
Sync Speed
1/8000S
Compatible Flash
Flashgun, Studio light and outdoor light
Focusing light
Transmitter support focusing light
Battery
Compartment
Channel setting
button (CH SET)
PC sync socket
USB Socket
King
Wireless TTL Flash Trigger
For Nikon
Hot Shoe
Operation Indicator
Power Switch
Trigger pin
Eyelet
Mounting Foot
Receiver
Trigger Mode
Overview
Transmitter
Output will support PC port and hot shoe trigger
Thank you for purchasing PIXEL product.
Receiver
Output support TTL, Hot shoe and connecting cable socket.
Thank you for purchasing Pixel product --- King. King achieves high-sync
flash shooting with Nikon cameras and other creative lighting function
{
Transmitter
USB socket , PC port , Hot shoe output
including I-TTL, M, FP… etc. King supports shutter speeds up to 1/8000 s.
Receiver
USB socket , PC port , Hot shoe output
King has 3 different groups; each group can use multiple units and set each
Power
Sticker
Battery
Compartment
Suitable Battery
TransmitterAA x 2pcs(support 1.2V rechargeable
battery)or DC 5V power
USB Socket
ReceiverAA x 2pcs(support 1.2V rechargeable
battery)or DC 5V power
Eyelet
Mounting Foot
Re ceiver 100Hr s
3
1
5
Eyelet: Use strap or lanyard to hold the device
Function
1. Make sure the camera and flash are powered off before installing the
King.
Power Switch
Hot Shoe
Operation Indicator
Trans mitter 200Hrs
Standby
Cautions
Channel setting
button (CH SET)
PC sync socket
as individual power settings.
Please read this instruction manual completely and ensure proper
operations with your flashgun before using this product.
Group setting
button (GP SET)
Gr oup
{Indicator
Channel
Indicator
Socket
Hot Shoe: Hot shoe port for output, airborne flash is available for install
Support EV
Support flash group setting on transmitter
Channel setting button (CH SET): Set the channel of device . Slightly press
2. As an electronic accessory this may be affected by rare environmental
causes. Normal working operations should not be affected by this.
Support 1st Curtain, 2nd Curtain and High speed sync
the button to check the current status; press again or hold for 2sec to enter
Support High speed sync for studio and outdoor light
setting mode.
3. Drops or shocks will lead to product failure.
Support three flash groups with different flash ratio
4. When not in use for long durations, please turn off the transmitter’s and
the receiver's power and remove the battery.
5. The batteries should be installed correctly. Reverse polarity may cause
batteries to leak corrosive liquids, heat or explosion.
6. When connecting the cable with the device, do not pull directly on the
wires.
7. Do not store in a high temperature, such as an enclosed car under direct
sunlight, the dashboard and other high-temperature areas.
8. Keep dry, do not touch the product with wet hands. Do not immerse in
water or exposed to rain as this may lead to failure of the device.
9. Do not use near flammable gases. Failure to follow this warning may
cause explosion or fire.
10. This product includes batteries; please strictly follow the instruction for
proper operation. Failure to follow this may cause explosions, fire or
personal injury.
Support well known brand flashes for High speed sync and TTL.
Group setting button (GP SET): Set the group of device. Slightly press the
Support well known brand flashes for trigger.
(May not support hight speed sync and TTL flash or other function)
button to check the current status; press again or hold for 2sec to enter setting
mode.
Support firmware upgrade
Channel Indicator/Group Indicator: These indicator lights show the group or
Support multi receiver control
channel working status.
Support flash focusing light
Follow camera instructions for above usage.
Included items
Please check the listed items below in the package, please contact your dealer if there
are missing items.
Operation Indicator: Show the statue of power , transmission and output . blue
light will flicking slowly under the stand-by mode ; blue light will flicking quickly
under the Normal transmission ; red light will flicking quickly when under low
power .
King Transmitter
1pc
Battery Compartment: Compartment for 2pcs AA battery, 1.2V to 1.6V
Receiver Lock Ring: Suitable to attach on tripod or screw nut.
King Receiver
1pc
PC-1/4 Connecting Cable (6.35mm)
1pc
PC-3.5 Connecting Cable
1pc
USB 2.0 Cable
1pc
Receiver Holder
1pc
Universal Flash Holder SF-18
1pc
Instruction Manual
1pc
PC Socket: The receiver is the output. It can connect studio light and outdoor
flash. The transmitter is the input.
Receiver Holder
Power Switch: Switch to OFF to turn off the device; switch to ON to turn on the
device.
Transmitter Mounting Foot: Input interface connection with camera hot shoe.
Universal Flash
Holder SF-18
UBS Socket: Used for firmware upgrade, DC 5V power supply.
PC-3.5 Connecting Cable
Sticker: Showing product S/N number, battery type on the sticker.
PC-1/4 Connecting Cable (6.35mm)
2
4
6
Receiver Installation
1、Power
Transmitter and receiver are
using 2pcs AA battery which
are compatible with 1.2V
battery;also supports 5V DC
power supplied through USB
socket.
King is using 2-steps power
switch; switch to OFF to turn
off and switch to ON to turn
on.
A
B
C
D
The transmitter supports the installation of the airborne light without affecting
the TTL communication of the airborne light and the camera and can send out
the flashing signals simultaneously, trigger off-camera studio lights or
airborne lights with TTL sync.
Airborne light TTL+Studio light
lead lights from the machine
Airborne light TTL+Airborne
off-camera TTL light or flash
Group Flashing
The setting will be saved after the power is off, even the setting of each
channel is different.
2. Channel or Group:
Slightly press CH SET or GP SET button can check the current status of
the device and enter into the setting mode. Press CH SET or GP SET
button again can enter into next group or channel.
Setting Method: After entering into the setting mode, slight press CH SET
or GP SET button to switch the setting. Leaving it for 3 seconds to close
LED and exit the setting mode. Or press another SET button to close
LED, exit and save the setting.
1. Insert flashgun to receiver’s hot shoe.
2. Follow the flashgun locking system to lock the flash.
3. Insert this receiver on the multi use flash holder and tight the transmitter
lock ring to the left.
Operation Instruction
The following picture shows how to operate the compatiable camera and
speedlite.(The example devices are Nikon D700 camera and SB-910 speedlite)
when the transmitter seted as ABC , the flashes
which installed A,B and C 'receiver will flashing
3、Operation Indicator
Show the statue of power , transmission and output . blue light will
flicking slowly under the stand-by mode ; blue light will flicking quickly
under the Normal transmission ; red light will flicking quickly when under
low power .
Camera Mode
2
1
Channel indicator has 3 red indicators which are L1, L2, and L3.
Transmitter and receiver use the same setting method and can be set as
7 different channels. [L1]、 [L2]、 [L3]、 [L1、 L2]、 [L2、 L3]、 [L1、 L3]、
[L1、L2、L3].
Support high-speed sync
Support white balance
when the transmitter seted as AB , the flashes which installed A and B 'receiver will flashing
4
3
CH
SET
CH
SET
CH
SET
CH
SET
CH
SET
CH
SET
11
9
7
CH
SET
Group indicator are 3 red indicators which are A, B and C. Transmitter and
receiver use the same setting method and transmitter can be set as 7 different
Support ISO sensitivity
Support exposure compensation
groups. [A]、[B]、[C]、[A、B]、[B、C]、[A、C]、[A、B、C].
Flash Mode
1
GP
SET
GP
SET
GP
SET
GP
SET
GP
SET
GP
SET
when the transmitter seted as B , the flashes which installed B 'receiver will flashing
2
GP
SET
Receiver can be set as 3 different groups.
[A]、[B]、[C].
GP
SET
GP
SET
Support TTL hi-speed sync mode
GP
SET
Picture shows the lead flashing operation from the machine
Device Installation
The transmitter is mounted on the hot shoe of the top of the camera, trigger
off-camera flash sync
Transmitter Installation
A
Support manual hi-speed sync mode
when the transmitter seted as A , the flashes which installed A 'receiver will flashing
Thank you for purchasing PIXEL product and read this instruction manual
carefully. If you have any question please kindly contact our local dealer or visit
http://www.pixelhk.com.
B
The information in this manual is updated to 1st January, 2012. If you want to
use together with other product released after this date, please consult Pixel’s
dealer for related information.
Firmware upgrade link : http://pixelhk.com/down/kingnikon
Off-lead flashing studio lights
1. Loosen the transmitter lock ring to the right and insert into camera hot
shoe; tighten the transmitter lock ring to the left.
Off-lead flashing airborne lights
PSM36 V10.01
8
10