PREMIUM CONFERENCING DATA SHEET < INTERACT™ | AT Premium Conferencing System A complete conference room solution with flexibility in mind. The INTERACT AT includes all the necessary audio equipment and peripherals for any conference room while delivering exceptional audio quality at an affordable price. Customize your solution with multiple microphones and speaker options, direct connection to enterprise telephones, USB audio, a room controller, plus the ability to connect to the rich-media systems. A USB-ENABLED AUDIO CONFERENCING SOLUTION Applications ++ Unified Communications Advantages ++ Enables Unified Communication in the conference room ++ Use with Rich-Media Systems >> Web Conferencing ++ USB port connects to PC for Skype, WebEx and other A/V conferencing applications >> Personal Computer ++ Headset port connects to Cisco, Avaya, and Nortel handsets >> IP Telephony ++ Sound quality exceeds traditional conference phone with ClearOne’s HDConference technology >> Video Conferencing ++ Board Rooms >> Simplified installation combines all microphone signals onto a single data cable minimizing conduit and raceway requirements. ++ Conference Rooms >> Noise cancellation reduces background noises from fans or HVAC systems ++ Executive Offices >> Automatic level controls keep participants’ audio balanced and consistent ++ Scalable and flexable >> Wireless or wired controller option >> Multiple speaker mount options: wall, ceiling or custom >> Select appropriate number of MIC EX and MIC PODS (max three) to fit the applications ++ Integral network management system enables remote configuration, contol and monitoring ++ Interoperates with NetStreams™ A/V over IP systems ++ Easy to install, program and use INTERACT AT DATA SHEET < > Components INTERACT AT MIXER Provides advanced audio processing for superior sound quality. INTERACT MIC Each pod features three voice-activated mic elements for 360-degree audio pickup. INTERACT DIALER Wired or wireless controller provides intuitive interface that emulates a telephone keypad. INTERACT MIC EX Each box contains three industry standard XLR microphone connectors. Boxes are daisychained from mixer using standard RJ-45 cables. Boxes can be rack-mounted with mixer or strategically positioned throughout room to minimize microphone cable runs. > SPECIFICATIONS Audio Performance Conditions: Unless otherwise specified, all measurements are performed from 20 HZ to 15 kHz BW limit (No Weighting) Dynamic Range: > 80 dB (Non-A Weighted) THD+N: < 0.02 % Audio Mixer AEC tail time: 128 ms Adaptive Noise Cancellation: 6-15 dB Gating: Adaptive ambient, 1st Mic Priority, Lookahead Gating Up to a total of 3 INTERACT MIC or INTERACT MIC EX devices can be connected to the INTERACT AT Mixer 48 kHz Sample Rate, 24-bit Resolution Audio Mixer Line Input Connection: Unbalanced RCA Impedance: 10 kΩ Nominal Level: -10 dBu Maximum Level: +9 dBu Audio Mixer Playback Connection: Unbalanced Left and Right RCA (Summed Internally) Impedance: 10 kΩ Nominal Level: -10 dBu Maximum Level: +15 dBu Audio Mixer Line Output Connection: Unbalanced RCA Impedance: 10 kΩ Nominal Level: -10 dBu Maximum Level: +9 dBu Audio Mixer Record Output Connection: Unbalanced Left and Right RCA (Mono Source Split Internally) Impedance: 10 kΩ Nominal Level: -10 dBu Maximum Level: +9 dBu Audio Mixer Amplifier Output Connection: Left and Right Push Terminals Power: 5 Watts Frequency Response: 20 Hz – 15 kHz (+/-1 dB) Dynamic Range: > 80 dB THD+N: < 0.50% (+5 dBu Line Input @ 1 kHz) > INTERACT COM (Wired or Wireless) Provides an interface to telephone sets via the headset port or to PC audio via a USB port. The Wireless Com provides the interface to a wireless controller. BOSE® LOUDSPEAKERS Ceiling or wall-mount options provide premium sound. Also available without speakers for custom speaker options. Optional accessories available individually or in predefined bundles. Telephone Interface Telephone Audio Performance Conditions: Unless otherwise specified, all measurements are performed with Transmit Limiter and Receive ALC disabled Frequency Response: 250 Hz to 3.3 kHz ±1 dB THD+N: < 0.30% re-max level 250 Hz to 3.3 kHz SNR: > 62 dB re-max level Telco Line Echo Cancellation Tail Time: 32 ms Null: 55 dB Nominal Telephone Noise Cancellation Noise Cancellation 6-15 dB Attenuation RS-232 Control Port DB9 Female Baud Rates: 9,600 / 19,200 / 38,400 / 57,600 (Default) / 115,200 Protocol: 8 Bit, 1 Stop, No Parity Hardware Flow Control ON (Default)/OFF USB Configuration Port USB 1.1 Compatible Type: B Connector VISCA Camera Port Din, 9600 Baud, No Flow Control LAN 10/100 Ethernet RJ-45 with Activity LED Supports: Telnet, HTTP Link Bus Connection: RJ-45 with CAT5 Daisy-chained Maximum Distance: 60 feet from Mixer to last device in chain Maximum Number of INTERACT MIC Devices: 3 - Any Mix of INTERACT MIC or MIC EX Maximum Number of INTERACT COM Devices: 1 per INTERACT Mixer Configuration Software INTERACT Supports: Microsoft XP, Vista and Windows 7 INTERACT COM Versions: Wired or Wireless (2.4 GHZ) USB Audio Channel: USB 2.0 Compatible Connector: Mini Type B TX and RX Channel, 16-bit at 16 kHz Headset Audio Channel: Connector: RJ-9 Supported Telephone Sets: Most Cisco, Avaya, and Nortel Phones Audio Performance Frequency Response: 40 to 3300 Hz THD and Noise: < 0.04% Re-max Level with 0 dB Gain @ 1 kHZ Dynamic Range: > 84 dB (Non A-Weighted) Power Supply Primary Voltage: 100 to 240 VAC Auto-Sensing, 50-60 Hz Power Consumption: 32 W Maximum Dimensions (W x D x H) INTERACT AT Mixer: 17” x 7.5” x 2” (43.2 cm x 19.1 cm x 5.1 cm) INTERACT DIALER: 10.5” x 4.5” x 2.75” (26.7 cm x 11.4 cm x 6.9 cm) INTERACT MIC EX: 4.7” x 5.6” x 1.7” (11.9 cm x 14.3 cm x 4.4 cm) INTERACT COM: 4.7” x 5.6” x 1.7” (11.9 cm x 14.3 cm x 4.4 cm) INTERACT MIC: Diameter: 7” (17.8 cm) Audio Processing: Receive Automatic Level Control Height: 1.5” (3.8 cm) Line Echo Cancellation for Side-Tone Elimination Weight GPIO: INTERACT AT Mixer: 4.5 lb. (2 kg) Pin 1: Global Mute (C) INTERACT DIALER: 2.0 lb. (0.9 kg) Pin 2: Global Mute (S) INTERACT MIC: 1.5 lb. (0.7 kg) Pin 3: ON/OFF Hook (C) Pin 4: ON/OFF Hook (S) INTERACT MIC EX: 1.5 lb. (0.7 kg) Pin 5: 5V DC up to 40 mA INTERACT COM: 1.5 lb. (0.7 kg) INTERACT DIALER Available in Wired or Wireless Versions Functions: Dialing, Volume Control, Mute Control Communications: Wired Version: RS-232 Connected to Mixer Wireless Version: 2.4 GHz DSSS to INTERACT COM Wireless Compliance ROHS Compliant WEEE Compliant UL Safety Listed AES48-2005 AES Standard on Grounding and EMC Practice INTERACT MIC – Tabletop Microphone Coverage: 360° Frequency Response: 60 Hz- 14 kHz THD+N: < 0.08% (-45 dBu Input @ 1 kHz) Sensitivity: -45 dBu Part Numbers Complete Room Solutions: Call ClearOne for complete listing of room options. INTERACT MIC EX - Microphone Distribution Box Connection: Female XLR Balanced Maximum Level :+18 dBu Frequency Response: 20 Hz – 15 kHz THD + N: < 0.01 % Phantom Power: 24 V @ 10 mA Impedance: 5 kΩ per Leg or 10 kΩ Balanced INTERACT AT: 910-154-010 INTERACT COM: 910-154-030 INTERACT COM-W (For Wireless Dialer): 910-154-050 INTERACT MIC: 910-154-015 INTERACT MIC EX: 910-154-020 INTERACT DIALER: 910-154-035 INTERACT Dialer W (Wireless): 910-154-040 Bose™ Wall Speaker: 910-103-061L Bose Ceiling Speaker: 910-154-016 CLEARONE LOCATIONS Headquarters: Salt Lake City, UT USA 5225 Wiley Post Way Suite 500 Salt Lake City, UT 84116 Tel: 801-975-7200 Toll Free: 800-945-7730 Fax: 801-977-0087 email@example.com Latin America Tel: 801-974-3621 firstname.lastname@example.org EMEA Tel: 44 (0) 1189 036 053 email@example.com APAC Tel: 801-303-3388 firstname.lastname@example.org © 2010 ClearOne. All rights reserved. Other product names may be trademarks of their respective owners. Information in this document subject to change without notice. 802-154-000-DS Rev. 2.8 August 2010.