Specially designed rack mount holder

19-inch rack mount holder
RMO Series
NEW
Specially designed
rack mount holder
RMO series
*Power supplies are not included.
www.matsusada.com
Specially designed
rack mount holder
RMO series is rack mount adapter for 19-inch rack which hold Matsusada Precision’s table top power supplies and
digital controllers. Each model is dedicated design for installed units, therefore, no additional heat countermeasure is
needed and offer easy installation.
Features
• Consideration is given to cooling*1.
• Specially designed, and just right fit for Matsusada power supplies.
• One AC line can provide all the power to forced air cooling fan and also power supplies to be neatly stored.
Lineup
When all models put it away in a 19-inch rack, please establish the space more than 1.5mm in the lower part for prevention of interference.
MODEL
Compatible
models
H
P
(Height)
(Pitch)
inch(mm)
inch(mm)
RMO-44H-HALF
REKJ, VOLJ
1.73(44)
RMO-133H-RK *2
RMO-133H-RK2 *2 *3
RMO-133H-RK3 *2 *4
D
Accommodation
(example)
Dimensions
1.25(31.8) 16.93(430) 16.77(426) 15.51(394)
2-unit
A
5.22(132.5) 2.25(57.2) 16.77(426) 16.54(420) 17.24(438)
10-unit
5.22(132.5) 2.25(57.2) 16.77(426) 16.54(420) 17.24(438)
10-unit
5.22(132.5) 2.25(57.2) 16.77(426) 16.54(420) 17.24(438)
10-unit
Outer
dimension
Internal
dimension
(Depth)
inch(mm)
RMO-133H-RK400
RK
5.22(132.5) 2.25(57.2) 17.01(432) 16.85(428) 13.78(350) RK(400W type) : 6-unit
RMO-133H-DRJ *5
DRJ
5.22(132.5) 2.25(57.2) 17.01(432) 16.85(428) 14.96(380)
3-unit
RMO-133H-EPR
EPR
5.22(132.5) 2.25(57.2) 17.17(436) 17.01(432) 17.72(450)
5-unit
RMO-133H-ELJ *6
ELJ
W3.31”(84mm)models
5.22(132.5) 2.25(57.2) 16.81(427) 16.77(426) 19.69(500)
5-unit*8
RMO-133H-CO
CO
5.22(132.5) 2.25(57.2) 17.28(439) 17.13(435) 5.91(150)
RMO-150H-B *7
RG
5.87(149)
2.25(57.2) 16.97(431) 16.81(427) 10.94(278) W2.76”(70mm)models
6-unit
RMO-150H-EJC
EJC
5.87(149)
2.25(57.2) 17.28(439) 17.13(435) 16.93(430)
2-unit
RMO-177H-R4G *2 *7
R4G
6.97(177)
17.17(436) 17.01(432) 15.75(400)
5-unit
*12
*
*34
*5
*6
*7
*8
*
02
R4K-36
R4K-80
RK-80
W(Width) inch(mm)
4(101.6)
B
11-unit
C
Suction temperature of the power supply shall be within the operation temperature. It is considered that temperature increased by 10°C shortens the durability of unit to half.
115VAC forced cooling fan is equpped.{230VAC forced cooling fan is available with option -L(230V)}. 3pin 2.5m AC cable is attached.Although design take air flow into consideration, actual temperature
during operation shall be verified by user.
AC input lines of power supplies mounted and that of cooling fan are to be bundled into one AC cable.{need separately AC connecting harness(see Accessories)}
RMO-133H-RK2 is equipped with an additional all power switch on front, which enable turning on/off powers maximum 10 units at a time.{need separately AC connecting harness(see Accessories)}
Please note that DRJ series with handle will exceed the height of 133mm.Please select DRJ-LNh if handle is not needed.
AC input cables for installed electrical load, ELJ are to be bundled into one AC cable.(Need separate AC connecting harness. See ‘Accessories’ in P.3.)
Make 100 mm or more room on the top and bottom. Otherwise, have forced cooling. Note that RG series and R4G series with a handle exceeds 149 mm or 177mm in height.
It holds ELJ series and DC power supplies, RK series (400W, 800W, and 1200W type) together, and can be offered as charge and discharge system.
Please contact nearby sales office for the number of power supplies, which can be held with one RMO in case of consolidation.
(Separate AC input line is needed for RMO-133H-ELJ and RK series in case of consolidation.)
RMO
series
Dimensions inch(mm)
Option
-L
(230V) Input Voltage of power supplies and forced air-cooling
A
fan to carry 200V to 240Vac ±10% 50 / 60Hz 1Ø
(RMO-133H-RK / RK2 / RK3, RMO-177H-R4G)
D
P
Accessories
W
18.31(465)
18.98(482)
Blank panel
B
H
Panel to hide the clearance caused by mounting products less than
accommodation on the rack mount holder. Depending on the kind
or number of power supplies and controllers, the base of RMO series
may sag a little bit. It will be lessened by equipped blank panel.
P
D
Panel height 1.73”(44mm) type
W
18.31(465)
MODEL
18.98(482)
C
BPA-44H-212W
Panel width
inch(mm)
Compatible holder
8.35(212)
RMO-44H-HALF*
*When using REKJ series or VOLJ series, please use this panel by all means.
H
P
Panel height 4.48”(124mm) type
D
W
18.31(465)
18.98(482)
Outside appearance of RMO-133H-RK, RK2, RK3
MODEL
Panel width
BPA-124H-35W
BPA-124H-70W
BPA-124H-84W
BPA-124H-140W
BPA-124H-210W
1.38(35)
2.76(70)
3.31(84)
5.51(140)
8.27(210)
Compatible holder
inch(mm)
RMO-133H-RK, RMO-133H-RK2
RMO-133H-RK3, RMO-133H-RK400
RMO-133H-DRJ, RMO-133H-EPR
RMO-133H-CO, RMO-133H-ELJ
RMO-177H-R4G
Panel height 5.51”(140mm) type
Outside appearance of RMO-133H-ELJ
MODEL
Panel width
inch(mm)
Compatible holder
BPA-140H-35W
BPA-140H-70W
BPA-140H-135W
BPA-140H-212W
1.38(35)
2.76(70)
5.31(135)
8.35(212)
RMO-150H-B
RMO-150H-B
RMO-150H-B
RMO-150H-B, RMO-150H-EJC
AC connecting Harness
Cable for supplying electrical power form rack mount adapter
(RMO-133H-RK2 / RK3 / ELJ) to power supply
Model CABLE RM-80W TYPE : for RK-80, R4K-80 series(10pcs / set)
CABLE RM-36W TYPE : for R4K-36 series(10pcs / set)
CABLE ELJ TYPE : for ELJ series(5pcs / set)
Screw for CO installation (only for RMO-133H-RK400)
Screw for installing CO series (Only for RMO-133H-RK400)
This screw is used for installing our digital controller, CO series.
It includes screws which can install 9 COs.
03
FAX
USA/canada : 1-888-652-8651
other countries : 1-81-77-561-2112
Customer Inquiry Sheet (RMO series)
Please copy this page and above fax number after filling out form below.
I would like
A quotation
An explanation of product
A demonststration
Other (
To purchase
)
Give us your requirement / comment
Please fill in below.
Address:
Company:
Dept.:
Title:
Name:
Tel:
Fax:
E-mail:
Warranty
We warrant that products contained in this catalog (hereinafter, the “Products”) are free from defects in material and workmanship under normal use for a period of one (1) year from the date of
shipment thereof. However, the warranty period for X-ray detectors and X-ray source shall be either one (1) year from the date of shipment or 1,000 hours, whichever shorter.The above warranty
shall not apply to any Product which, at our sole judgment, has been:i)Repaired or altered by persons unauthorized by us; or ii)Connected, installed, adjusted or used otherwise than in accordance
with the instructions furnished by us (including being used in an inappropriate installation environment, such as in corrosive gas, high temperature and humidity). We are not liable for any loss,
damage or failure of the Products after the shipment thereof caused by external factors such as disasters.If any Product is showed to be defective as satisfactory to us, we, at our sole discretion,
repair or replace such defective Products at no cost to the purchaser.We assume no liability to the purchaser or any third party for special, incidental, consequential, or other damages resulting
from a breach of the foregoing warranty. This warranty excludes any and all other warranties not set forth herein, express or implied, including without limitation the implied warranties of merchantability or fitness for a particular purpose. The Products are not designed and produced for such applications as requiring extremely high reliability and safety, or involving human lives (such as
nuclear power, aerospace, social infrastructure facility, medical equipment, etc.). The use under such environment is not covered by this warranty and may require additional design and manufacturing processes.
For products
www.matsusada.com/product
For contact
www.matsusada.com/contact
San Jose Office : 2570 N.First Street Suite 200 San Jose, CA 95131 Dallas Office : 5430 LBJ Freeway, Suite 1200 Dallas, TX 75240 International Office : Osaka-City, Osaka Japan
Tel: +81-6-6150-5088 Fax: +81-6-6150-5089
Tel: +1-408-273-4573 Fax: +1-408-273-4673
Tel: +1-972-663-9336 Fax: +1-972-663-9337
New York Office : 80 Orville Drive Suite 100 Bohemia, NY 11716
Boston Office : 275 Grove Street, Suite 2-400 Newton, MA 02466 Headquarters : 745 Aoji-cho Kusatsu Shiga 525-0041 Japan
Tel: +1-631-244-1407 Fax: +1-631-244-1496
Tel: +81-77-561-2111 Fax: +81-77-561-2112
Tel: +1-617-663-5711 Fax: +1-617-663-5331
01.135.04 22