TriFlex® II - Peavey Commercial Audio

TriFlex® II
The Triflex™ II is a 1000 Watt three piece, two-channel sound system, already tweaked and ready to go
for sound reinforcement, DJ gigs, and various music playback duties. Consisting of a shared Subwoofer
cabinet and a pair of Satellite speakers, the system has been pre-engineered for a balanced sound and a
crisp, punchy presentation. The three-way effective performance that the system is capable of provides a
clear sound at high output levels, with plenty of punchy bass.
• 1000W Active Two-Channel Three-piece Speaker
• One shared Subwoofer cabinet which houses the
inputs and power amps
• Two two-way Satellite speakers with speaker pole
stand adaptors
• Subwoofer has 15” woofer, with 500W peak available power
• Satellite speakers have 10” woofer, RX 14 1.4” compression driver tweeter
• 250W peak available power to each Satellite speaker
• Peavey’s exclusive DDT(tm) compression on the
Satellite power amps
• System comes with two 15 foot speaker cables
• Protective slipcover with cable storage pockets and
built-in Velcro retaining straps
• Heavy-duty locking casters on Subwoofer cabinet
for transport of system
• Satellite speakers nest on top of the Subwoofer, help
ease transport
• Four-pin twist-lock connectors on amplifier outputs
and Satellite inputs
• ***Speaker stands sold separately***
TriFlex® II
Power Handling, Satellite System: 200W
Continuous, 400W Program, 800W Peak
Inputs (Line Level): Left channel XLR or
1/4” phone jack combo input (female)
Box tuning frequency (Fbox): 84 Hz
Frequency Response, 1 meter on-axis,
swept-sine in anechoic environment: 88
Hz to 20 kHz
Right channel XLR or 1/4” phone jack
combo input (female)
Transducer complement: 1 x 15” woofer,
custom heavy-duty
Nominal Impedance: 8 ohms
Power Handling, Transducer: 350W
Continuous, 700W Program
Box tuning frequency (Fbox): 48 Hz
Frequency Response, 1 meter on-axis,
swept-sine in anechoic environment (thru
system electronics): 40 Hz to 105 Hz
Usable low frequency limit (-10 dB point):
34 Hz
Sound Pressure Level, 1 Watt, 1 meter in
1/2 space environment: 102 dB
Maximum Sound Pressure Level (1 meter,
1 / 2 space): 127 dB
Weight: 98 lbs. (44.5 kg)
Dimensions (H x W x D): 19.65” X
28.00” X 28.10” (Includes feet)
(unit down on feet) 19.65” X 32.00” X
28.10” (Includes feet and casters)
Height in Transport mode: 32.00”
Sound Pressure Level, 1 Watt, 1 meter in
1/2 space environment: 101 dB Maximum Sound Pressure Level (1 meter, 1/2
space): 124 dB
Weight: 24 lbs. (10.9 kg)
Dimensions (H x W x D): 19.6” X 11.83”
X 11.83” (Upright, Includes feet)
Active Crossover Frequency: 120 Hz, 24
Maximum Sound Pressure Level (1 meter,
half-space): 129 dB
Dimensions when in transport orientation,
on casters (H x W x D): 43.00” X 20.37”
X 23.54” (Includes all feet)
Weight (Sub and Satellites Only): 146 lbs.
(66.4 kg)
Transducer complement: Low Frequency
Section: 1 x 10” woofer, custom heavyduty Speaker Cables: Two 15 foot 16 ga. with
4-pin twist-lock connectors on each end.
High Frequency Section: 1 x 1.4” titanium
compression driver on a Quadratic Throat
Waveguide™ with 75 degrees by 75
degrees coverage pattern
Subwoofer Amp Power Output: 500W
peak available power 250W continuous,
into 8 ohms.
Satellite Amps Power Output: 250W peak
available power 125W continuous, into 4
Nominal Impedance: 4 Ohms
Logo referenced in Directive 2002/96/EC Annex IV
(OJ(L)37/38,13.02.03 and defined in EN 50419: 2005
The bar is the symbol for marking of new waste and
is applied only to equipment manufactured after
13 August 2005
Input Impedance: 20 k Ohms balanced,
10 k Ohms unbalanced (single-ended)
Thru (Outputs, Line Level): Left channel
XLR full-range output (male), Right channel XLR full-range output (male)
Speaker Level Outputs: Left channel 4-pin
twist-lock professional connector, Output
Right channel 4-pin twist-lock professional connector Output
Master System Level (Left & Right Gain)
Subwoofer Level Control, Ground Lift
Switch, Power Switch (On rear of amp
panel when the Subwoofer is in use position, with rubber feet on the floor)
Nominal amplifier frequency response:
+0, -2 dB from 10 Hz to 20 kHz
Hum and noise: Greater than 90 dB below
rated power
DDT dynamic range: Greater than 18 dB
THD: Typically less than 0.05 %
Infrasonic filter protection: 36 dB/octave
Power Requirements: Domestic 120VAC,
60 Hz, 210 Watts
Download PDF
Similar pages