KISSlicer Quick

KISSlicer Quick-Start Guide
Welcome to KISSlicer! This short document will guide you through the creation of your first print
file. The second part of the document contains a concise reference guide to the parameters
and some general tips to better exploit the printer capabilities. For an in-depth description
please refer to the pdf manual enclosed with the download.
Download and install KISSlicer
Go to the download page:
Select the version matching your Operating System (at the moment Windows and Linux
versions are available) and save it locally. You can unzip the executable directly into the
desired folder. For example, under Windows you can use “C:\KISSlicer\” or “C:\Program
Files\KISSlicer”. No installation is required. At the first run the executable will create support
files in the same folder.
If you downloaded the KISSlicerQuickStart.pdf file and/or Glasswalker’s sample settings, simply
place them all into the same directory as the executable. Under Windows you can place a
shortcut to ‘KISSlicer.exe’ in your ‘Send To’ folder, allowing you to right-click on any model(s) in
the Windows File Explorer, and [Send To]->KISSlicer.
Your first print
Run the executable (KISSlicer.exe) and the following window will open.
First of all go to preferences->advanced settings to set the printer, material and print style.
This first run only some setting will be (in case) modified, for a parameters summary check the
end of the document, and for an in depth description refer to the manual.
Under style you can save as many profiles as you like. For the first print you can leave the
parameters as they are.
You can select the material in the extruder.
ABS and PLA default profiles are provided. You can select if the Fan should be on all the time,
only when printing the perimeter or never. You can set printing temperature, min/max printing
speeds, destring settings and modify the flowrate to adapt to your material. You can also set a
print cost and a warm up parameter to estimate print time and cost.
Select your material from one of the default options, and for the moment keep the default
settings. In case you already have a working temperature profile for your material update it
Here you can rename the printer profile, create a new one and set some of the parameters.
For rapman dual head set Bed Size to 120-130mm
For rapman firmware 4.2.x set Offset Y = 20mm
Bed flatness will drive the pillar height, while Z-settle will move the bed a little lower and then will
raise it back, useful for some anti wobble designs.
For now leave the other parameters as they are. You can refer to the manual to modify the
others parameters.
This will define a range of speed parameters, from the main window you can set the printer
speed between the two extremes here shown. Leave them as they are for the moment.
You can assign the extruder material to your available heads.
With free version you can set one extruder for all the print, while the the pro version you can
assign the head to part, raft, support and part/support interface. Check at the end of the guide
for an example
Kisslicer settings
The settings allow so fine tune the crowning threshold. This is a pro feature, and for the free
version the values are not modifiable. For sure it is a parameter to be modified after getting
acquainted with the printer, so for the first print leave it as it is.
Loading a STL file
A new part can be loaded either by pressing the Add model button, or by drag and drop over the
3D view area.
With pro version you can upload multiple stl models.
The stl file must be correctly oriented before loading it to kisslicer. Free Netfabb is a nice option
to correctly orient the part.
View the part
The 3D view can be modified in the following way:
Left mouse
pan view (translate view)
Mouse wheel, or right+left mouse button
zoom in/out
Right or center mouse button
rotate view
The reset button will restore the view.
Positioning the part
A part can be positioned in the print area with the use of the two sliders on the bottom left. This
is a coarse positioning, to avoid damaged print area, for instance.
Setting the printer parameters
From the main view the printer parameters can be adjusted and tailored to suit the printing
needs. Some of the options use the profiles or value ranges already set in the preferences
Printer profile
From the printer select menu a different printer profile can be selected.
The printer settings drive the number of extruders, the bed size and offset, bed flatness (to be
used in the raft calculation) and z-settle.
The style selector allow to choose between preset parameters groups, mainly infill%, use of
destring, loops and stacked layers, extrusion width and layer thickness. Choose a suitable
On the main window it is possible to choose the support characteristics. Mainly if the support
is to be switched on or off. In case of support on it can be chosen a varying finesse of the
structure. Moreover the support angle decides the overhang limit before using the support
structure. 45 degrees is a general value, but it can be tailored depending on the material and
model design.
The precision slider will allow to set the speed between the speed extreme values available in
settings->speed. A faster print is generally less precise, and could cause overheating. A slower
print will take longer.
3 raft stiles are available:
● OFF creates a raftless print
● Grid greats a “traditional” stile raft
● Pillar creates a first layer of small pillars, and then creates the traditional grid. The
height of the pillars is calculated with the bed flatness parameters. The higher the value
the bigger the pillars. This raft style is more forgiving when the bed is not flat anymore
Wipe pillar
The wipe pillar is a cylinder printed before every layer to clean the extruder tip. It reduces
hairing and it is extremely important in dual head prints. Can be switched off, or the position with
respect to the main part can be chosen.
Creating (slicing) a file
After having reviewed the model, and selected the printer parameters it is time to create the
print file. Press the SLICE button and let the magic begin.
Saving the generated file
Immediately after the file is generated you will be prompted to save it. In case you press cancel
you can export again the file pressing once more the slice button. The path is already calculated
so only the file export will take place.
Reviewing the print path
The radio buttons on the top part of the main window will now be active and it is possible to
review the print path.
/* better at the beginning of the document..
Parameters quick reference
This section will shortly describe the meaning of the single parameters.
Menu Settings->Style:
Skin Thickness [mm]: ******************************************
Number of loops: number of loops of filament for the edge of the model
Extrusion width [mm]: cross section of the extruded material for external model portion
Infill extrusion width [mm]: cross section of the filament to be used for the infill
Layer thickness [mm]: Thickness (along Z) of the single print layer
Infill [%]: a solid model can be printed hollow inside, or with a partial fill, with an honeycomb like
Structure: It reduces print time and material, at the price of a less sturdy model.
Destring: activates the destring function: it will “suck” the filament when moving without printing
to avoid that the material in the hot head goes out without control creating filaments around
(oozing). The material will be pushed forth before restarting the print. The destring amount will
be set in the material menu for each material.
Stacked layers (Pro only): Sets the number of external layers to be printed before printing
a cumulative infill layer. For instance stacked layers = 2 means the sparse infill will be printed
every second layer, with the required material do fill the double thickness gap. It allows to print
the exterior with finer layers, while speeding things up while printing the infill.
Menu Settings->Material:
Fan: will switch on/off the fan during the print, or only when printing the external layers (loops)
Color: sets the color of the material for print review
Extruder RPM, Min/Max: sets a range of print speed. When using the speed slider the program
will use the two values as axtremes
Destring, Suck/Prime: sets the mm of filament to be sucked and pushed forward (prime) if
destring option is on.
Min Layer Time [s]: if a layer prints in less than this min value the printer will waste some time
to reach this minimum value. Useful for reducing overheating in slender/thin parts
Wipe [mm]: after a warm up the printer will push (prime) this amount of filament to ensure the
printer is ready.
Fiber Dia [mm]: Sets the diameter of the filament. Use a caliper to measure it.
Flow tweak: can adjust the amount of material being pushed, to tailor the print. This is material
and supplier dependent.
Temperature: sets the temperature of the material for the main part
Keep Warm: when printing with multiple materials sets the idle temperature
First layer: sets the temperature of the first layer, usually a little bit higher to better stick to the
Warm up and $/CM3: You can set a warm up time parameter. It will allow a more accurate print
time estimate. When using multiple head printing the warm up time could be a big player. The
cost per volume will allow to estimate the material cost during printing.
Menu Settings->Printer:
Number of extruders: will allow setting the number of extruders available. The material, and
the proprieties of the extruders are to be set in the “extruders” tab.
Bed size (x,y,z): sets your printable area
Offset (x,y,z): you can tailor the offsets of the printer, in case the firmware zero is shifted
Bed flatness: This parameter will be used with pillar raft to tailor the pillar dimensions. A higher
value will bring bigger and fatter pillars.
Z-settle: In case of anti wobble solutions it could be useful to have the z stepper moving over
the expected position and coming back to the desired z.
$/hour: Cost per hour of the printer, to estimate a total printing cost.
Menu Settings->Speed:
X,Y travel speed: speed along x and y while not printing
Z-speed: speed along z
Perimeter speed: minimum/maximum speed range for the external iso line (perimeter of the
Solid infill and support speed: minimum/maximum speed range for the support and for the
inner iso lines (with the exception of the perimeter)
Sparse infill speed: minimum/maximum speed range for the rest of the infill
Menu Settings->Extruders:
Extruder [n] mm/rev: This value come from the geometry of the extruder (an M8 is tipically
1.25 mm/revolution)
Extruder [n] Material: Select a material for the extruer from the ones you have created in the
Settings->Material menu
Object Extruder: Will select which of the available extruders will be used for the object printing.
The free version will print everything with this material/extruder. Pro version allows the following
Raft Extruder: extruder to be used for the raft
Support-Object interface Extruder: The last layers of the support can be printed with a
different extruder with respect to the main support. You can then print almost all the support with
the main extruder, and only the interface layers with an alternative extruder. In some cases this
will allow to speed up the print reducing extruder switching and extruder heating wai time
Support main Extruder: This is the most of the support material, see previous description.
Menu Settings->G-code:
G-code prefix: ********************
G-code postfix: ********************
G-code extruder change: ********************
Firmware type: Select one of the possible firmwares
5D Temp G-code: ********************
File extension: selects the file extension to be appended to the generated file
Menu Settings->Kisslicer:
Pro only, be very careful with the following parameters!!
Crowning Threshold [mm]: ********************
Oversample Resolution [mm]: ********************
Slice & Exit from Command Line: ********************
Print suggestions - tips and tricks
/* design tips
/* model orientation
/* destring tweak
/* ...
Print suggestions - Pro version
/* use of dual head - model tweaking
/* use of stacked layer
Download PDF
Similar pages