10
Channel Vision Technology will repair or replace any defect in
material or workmanship which occurs during normal use of this
product with new or rebuilt parts, free of charge in the USA, for ten
years from the date of original purchase. This is a no hassle warranty
with no mail in warranty card needed. This warranty does not cover
damages in shipment, failures caused by other products not supplied
by Channel Vision Technology, or failures due to accident, misuse,
abuse, or alteration of the equipment. This warranty is extended only
to the original purchaser, and a purchase receipt, invoice, or other
proof of original purchase date will be required before warranty
repairs are provided.
Mail in service can be obtained during the warranty period by calling
(800) 840-0288 toll free. A Return Authorization number must be
obtained in advance and can be marked on the outside of the shipping
carton.
This warranty gives you specific legal rights and you may have other
rights (which vary from state to state). If a problem with this product
develops during or after the warranty period, please contact Channel
Vision Technology, your dealer or any factory-authorized service
center.
Channel Vision products are not intended for use in medical,
lifesaving, life sustaining or critical environment applications.
Channel Vision customers using or selling Channel Vision products
for use in such applications do so at their own risk and agree to fully
indemnify Channel Vision for any damages resulting from such
improper use or sale.
IC514
5.25” IN-CEILING SPEAKER
www.channelvision.com
234 Fischer Avenue, Costa Mesa, California 92626 USA
(714)424-6500 (800)840-0288 (714)424-6510 fax
email: techsupport@channelvision.com
500-246 rev A2
10
Model IC514
Channel Vision’s ARIA™ IC514 5.25” in-ceiling custom
installation speakers feature high power handling capability
providing true stereo quality sound and not simply background
music. The pivoting tweeters can be aimed to any position to
custom fit any room, making them perfect for whole-house audio
or home theater applications. High quality materials ensure long
life and great performance. Gold speaker wire terminals not only
provide better contact surface but also offer less resistance to
signal transfer for a clearer sound.
Features:
h 5.25” High performance in-ceiling loudspeaker
h High power handling capacity
h Recommended power: 20W to 100W (peak)
h Gold speaker terminals
h Pivoting tweeter technology with 1” voice coil with neodymium
magnet, and silk soft dome
h Kevlar woofer with butyl rubber surround and 20 ounce magnet
h Small perforated designer grill
Mounting screws (4)
Accessories
2
Hole
Template
and
Paint
Shield
Speaker Grill Removal Tool
Non-dried Glue - Use to secure
speaker grills in place. Use of this
accessory is optional. The friction
fit of the grill may be sufficient.
Installation:
h Use the provided template to mark and cut a 6.5” hole in
drywall away from ceiling joists.
h We recommend wiring with AWG 16 or larger, stranded wire.
h For proper phasing, both speakers must be wired alike.
Connect red wires to red terminals on the speakers and to red
or plus terminals on the amplifier.
h Install IC514 in the hole. Tighten the mounting screws. The
mounting “dogs ears” will rotate outward and grip the drywall.
DO NOT OVER TIGHTEN the screws. A battery operated drill
on a “low clutch” setting is recommended.
h Aim tweeter
h To control the volume of the speaker locally, use an impedance
matching volume control, such as the Channel Vision VC-302.
Specifications:
Frequency range:
55Hz - 22kHz ± 3dB
Sensitivity:
89dB (1W/1m)
Power Handling:
100 Watts peak
Drivers:
1- 3/4” Soft dome pivoting tweeter
1- 5 ¼” Kevlar woofer
Impedance:
8 ohms
Finish:
ABS plastic
Dimensions:
8” OD. 4.21” height
(from surface of wall board)
Weight:
2.25 Lbs as shipped
hole size: 6.5” diameter
Specifications subject to change without notice.
3