electronic toy car - Baby products from Chipolino

CHILDREN'S
ELECTRONIC TOY CAR
with remote control function
• Suitable for 37~96 months
• Maximum user weight: 30kg
• Adult assembly required
OWNER'S MANUAL
Read and understand this entire manual before using!
Please keep this manual for future reference as it contains important
information.
Before first time use, charge the battery for at least 4-6 hours.
caution
WARNING
CHOKING HAZARD - Small parts.
Not suitable for children under 37
months.
Use the vehicle on generally level ground ONLY!
IMPORTANT
1WD
This label means the information or assembly for One Wheel Drive version ONLY!
2WD
This label means the information or assembly for Two Wheels Drive version ONLY!
H/L SPEED
This label means the information for High/Low Speed version ONLY!
WARNING!
FOR THE SAFETY OF YOUR CHILD, PLEASE READ ALL WARNINGS AND
ASSEMBLY/USE INSTRUCTIONS. KEEP THIS GUIDE FOR FUTURE REFERENCE.
• ADULT ASSEMBLY REQUIRED. The product contains small parts, which are for
adult assembly only. Keep children away when assembling.
• Always remove protective material and poly bags and dispose before assembly.
About Your New Vehicle
Thank you for your purchasing our products, we wants your child to enjoy this product for years to
come. Keep these points in mind as you read this guide:
Battery &
Fuse:
1WD
6V10AH x1(Fuse: 10A),
2WD
6V10AH x2 (Fuse: 10A)
13A and 5A)
H/L SPEED
6V10AH x2 (Fuse: 13A and 5A)
Load Capacity: Under 30KGS
Suitable age: 37~96 months
Average
Approximately
battery life:
300 times
Charge time: 8-12 Hours
VER:SMS-A30-EN-120612
VER:SMS-A30-RC-EN-120612
Size of car:
Speed:
Charger:
118 x 67 x 76.5 CM
2WD 3~5KM/H
1WD 3KM/H
Power way:
Charging type
Input: depend on local voltage
Output: DC DC6V1A or DC12V1A
Parts List
PARTt PART
Par
NO. NAME
NO.
PICTURE
Q’ty
(pcs)
REMARKS
PARTt PART
Par
NO. NAME
PICTURE
Q’ty
(pcs)
1
Vehicle
body
1
2
Seat
1
3
Light bar
1
4
View
Mirror
2
5
Dashboard
1
6
Rear
bumper
1
8
Wheel
cover
4
10
Charger
1
7
Steering
wheel
1
9
Searching
light
2
Placed
in the
assembly
package
REMARKS
x1
11
Driving
wheel
2WD
x2
x3
12
Wheel
2WD
x1
13
Gear
box
x3
14
2WD
x2
x2
Inner
bush
2WD
x2
Parts List
PARTt PART
Par
NO.
NO. NAME
15
17
Tailight
Rear
axle
19
Ø12
wahser
21
Ø4x16
round
head
screw
PICTURE
Q’ty
(pcs)
REMARKS
16
2
1
8
2
23
Remote
controller
1
25
Direction
motor
1
27
Ø5
locknut
1
PART
Par PART
NO. NAME
Placed
on the
front axle
and rear
axle.
Placed
on the
vehicle
body
Placed
on the
Remote
contorl
device.
Steeing
shaft
PICTURE
Q’ty
(pcs)
REMARKS
1
4
18
Ø10
Locknut
20
Ø5
nut
1
22
M5x45
machine
screw
1
24
M5x20
machine
screw
26
Remote
control
device
1
1
Placed
on the
front axle
and rear
axle.
Placed
on the
steering
wheel.
Placed
on the
steering
wheel.
Placed
on the
remote
contorl
device
Parts List
Assembly package
PART
Par t PART
NO.
NO. NAME
PICTURE
Q’ty
(pcs)
A
Cap nut
4
C
Ø10
wahser
E
G
REMARKS
PART
Par PART
NO. NAME
B
Spanner
23
D
Ø12
Outer
bush
Split
pin
23
F
Ø4x12
screw
Ø4x16
screw
4
PICTURE
Q’ty
(pcs)
2
8
4
REMARKS
Spanner
Pliers(not included)
B
Screwdriver(not included)
A
18
Charger
Charger
Ø5
Ø5 nut
nut
M5x45
M5x45 machine
machine screw
screw
Remote
controller
Ø4x12 screws
M5x20
Ø4x16 machine
screws screw
Ø5 locknut
Ø4x12 screws
Ø4x16 screws
Tools Required
G
F
24
G
27
22
22
23F
10
10
20
20
Parts Not Shown:
19
8
D
12
16
E
14
C
1
E
19
5
4
11
NOTE: Some parts shown are assembled on both sides of vehicle.
Parts Diagram
13
15
C
E
7
2
25
26
9
17
6
15
3
Assembly Steps
• Your new vehicle requires adult assembly. Please set aside at least 40 minutes for
assembly. Children can be harmed by small parts, sharp edges and sharp points in the
vehicle's unassembled state. Care should be taken in unpacking and assembly of the
vehicle. Children should not handle parts, or help in assembly of the vehicle.
• Please identify all parts before assembly and save all packaging material until assembly
is complete to ensure that no parts are discarded.
• Assembly tool for need: screwdriver(not included) , pliers(not included)and spanner.
1
● Insert the larger tab of taillight through
square opening in the vehicle. Push other end
to click the taillight into place.
● Repeat for the other taillight.
Larger tab
up
Taillight
2
Ø4x16 screws
Rear bumper
● Turn the vehicle body upside down.
● Insert the tabs on the rear bumper into
the slots in the vehicle body, insert four
Ø4x16 screws and tighten with a
screwdriver.
Assembly Steps
3
● Turn the vehicle body downside
up.
● Remove all the parts from the rear
axle.
● Slide a Ø12 washer onto the rear axle
from the longer end.
● Insert the rear axle through the hole in
vehicle body.
Rear axle
Ø12 washer
● Turn the vehicle body downside up.
● Remove all the parts from the rear
axle.
● Insert the rear axle through the hole in
the vehicle body.
Rear axle
2WD
Assembly Steps
4
Gear box
Rear axle
Driving wheel
Ø12 outer bush
Wheel cover Ø10 locknut
Ø12 washer
Cap nut
● Fit the gear box onto the rear axle from the right side.(Face the rear of the vehicle)
● Fit the driving wheel onto the rear axle, the driving wheel should match with the gear box.
● Fit a Ø12 outer bush onto the rear axle, the outer bush should match with the driving wheel.
● Fit a wheel cover onto the rear axle.
● Fit a Ø12 washer onto the rear axle.
● Fit a Ø10 locknut to the end of the rear axle and tighten with the spanner. DO NOT over-tighten.
● Insert the tabs on the cap nut into the slots in the wheel cover and make it click into place.
● Fit the gear box onto the rear axle, make the motor on the gear box pass through the hole in the vehicle
body wall.(NOTE: "R" labeled gear box should be fit to the "R" side of vehicle body; "L" labeled gear box
should be fit to the "L" side of vehicle body)
● Fit the driving wheel onto the rear axle, the driving wheel should match with the gear box.
● Fit a Ø12 outer bush onto the rear axle, the outer bush should match with the driving wheel.
● Fit a wheel cover onto the rear axle.
● Fit a Ø12 washer onto the rear axle.
● Fit a Ø10 locknut onto the end of the rear axle and tighten with the spanner. (DO NOT over-tighten)
● Insert the tabs on the cap nut into the slots in the wheel cover and make it click into place.
● Repeat for the other driving wheel.
2WD
Assembly Steps
5
Ø12 washer
Wheel
Wheel cover
Ø10 locknut
Front axle
Ø12 inner bush
Ø12 outer bush Ø12 washer
Cap nut
● Remove all the parts from the front axle.
● Fit a Ø12 washer onto the front axle.
● Fit a Ø12 inner bush onto the front axle.
● Fit a wheel onto the front axle and keep the inner bush match with the wheel.
● Fit a Ø12 outer bush onto the front axle and keep it match with the wheel.
● Fit the wheel cover onto the front axle.
● Fit a Ø10 locknut to the end of the front axle and tighten with the spanner. (DO NOT over-tighten, keep the
wheel can run smoothly)
● Insert the tabs on the cap nut into the slots in the wheel cover and make it click into place.
● Repeat for the other two wheel(s).
IMPORTANT SUPPLEMENT TO INSTRUCTION MANUAL
After assembling any wheel to the axles, please check the gap between the
screw thread and the collapsible (refer to below picture), if the gap is too big, please
add two or three washers inside the wheel, But after tightening the nut outside the
wheel, please turn the wheel by your finger to check if the wheel can run smoothly,
this is very important, because if the wheel can run smoothly, it is ok, but if the nut
press the wheel and the wheel can’t run smoothly, the motor will be broken easily!
Then you need to decrease one or two washers to make sure the wheel can run
smoothly!
GAP
Assembly Steps
6
Steering shaft
6-1
6-2
Split pin
Ø10 washer
Ø10 washer
Split
pin
Split pin
Steering
Front axle
Ø10 shaft
plate
washer
3
1
2
6-3
● Turn the vehicle body on its side.
● Insert the straight end of the steering shaft through the hole in the vehicle body.
● Insert a split pin through the hole ② in the steering shaft, bent the ends of the split pin back
using a pair of pliers. Fit and hold a Ø10 washer onto the steering shaft. Insert the bend end of the
steering shaft in the hole in the front axle plate (image 6-1). Fit another Ø10 washer onto the
steering shaft. Insert another split pin through the hole ① in the steering shaft, bent the ends of
the split pin back using a pair of pliers.
M5x20
machine screw
Remote
contorl device
7
Split pin
Ø10 locknut
Direction motor
Ø10 washer
● Turn the vehicle body upright.
● Turn the bonnet latches on the both sides of vehicle and open the bonnet.
● Fit a Ø10 washer onto the steering shaft. And insert a split pin through the hole③(image 5-3) in the
steering shaft, bend the ends of the split pin back using a pari of pliers.
● Fit the direction motor onto the steering shaft.
● Fit the remote control device onto steering shaft, make the remote control device match with the direction
motor. Line up the hole in the remote control with the hole in the steering shaft. Insert the M5x20 machine
screw and Ø5 locknut back in the same location, and tighten with a screwdriver.
● Plug the connector on the steering motor into the connector on the vehicle body. Push firmly to make sure
the connectors are completely joined.
Assembly Steps
78
View mirrors
8
Ø4x12 screws
8-1
8-2
Dashboard
● Fit the view mirror into the hole in the vehicle body and push until you hear it click into place.
● Repeat for the other side.
● Fit the dashboard assembly against the vehicle and keep the steering shaft pass through the
hole in the dash.
● Plug the Red and Black wires connecotr on the dash into the Red and Black wires connector on
the vehicle (image 8-1), plug the Yellow wires connecotr on the dash into the Yellow connector on
the vehicle (image 8-2).
● Insert four Ø4x12 screws and tighten with a screwdriver.
9
Steering wheel
Steering shaft
Ø5 nut
9-1
9-2
M5x45
machine screw
● Use a screwdriver to remove the battery cover and insert two dry(AA) batteries, replace the
battery cover.(image 9-1)
NOTE: The product does not included dry(AA) battery.
● Remove the M5x45 machine screw and Ø5 nut from the steering wheel.
● Insert the steering wheel onto the end of the steering shaft.
● Insert the M5x45 machine screw through the steering wheel and steering shaft, and tighten
the Ø5 nut. (image 9-2)
Assembly Steps
10
Ø4x16 screws
Searching
lights
Light bar
11
● Inset the tabs on searching light into the
hole in the light bar, and push until you hear it
click into place.
● Repeat for the other searching light.
● Fit and hold the light bar assembly against
the vehicle body, insert four Ø4x16 screws
through the light bar assembly and into the
vehicle. Tighten the screws with a
screwdriver.
Ø4x16 screws
(round head)
Power
connector
Seat
Battery
10-2
10-1
● Plug the motor connector(s) into the vehicle connector(s) under the seat.(image 10-1)
● Remove Ø4x16 round head screws in the vehicle with a screwdriver.
● Fit the seat against the vehicle and tighten the screws with a screwdriver.
● Plug the power connector into the terminal on battery under the bonnet.(image 10-2)
● Close the bonnet.
How To Operate Your Vehicle
WARNING!
PREVENT INJURIES AND DEATHS:
• NEVER LEAVE CHILD UNATTENDED. DIRECT ADULT SUPERVISION
IS REQUIRED. Always keep child in view when child is in vehicle.
• Never use in roadways, near cars, on or near steep inclines or steps,
swimming pools or other bodies of water.
• Always wear shoes.
• Always sit on the seat.
• Suitable for age 37~96 months; Maximum user weight is 30kgs.
Must confirm before using that following work which is already finished:
• Important! Before using the vehicle for the first time, the battery needs to be charged for 4 to 6 hours, no
more than 10 hours. Only an adult can charge or recharge the battery.
• Make sure all places with the screw has already been locked.
Rules for Safe Riding
READ THESE RULES ALOUD TO YOUR CHILD AND THEIR PLAYMATES AND MAKE SURE
THEY UNDERSTAND THEM!
• Always wear a helmet when riding.
• Direct Adult Supervision Required.
• Keep Children within Safe Riding Areas.
• Never use in roadway, near motor vehicles, on lawn space, on or near steep inclines or steps, swimming
pools or other bodies of water;
• Use the toy only on flat surfaces. such as inside your house, garden or playground.
• Never use in the dark. A child could encounter unexpected obstacles and have an accident. Operate the
vehicle only in the daytime or a well-lit area.
• It is not recommended to drive the vehicle on wet surfaces or on lopes of greater than 15 degrees.
• Do not use this vehicle outdoors when it is raining or snowing.
• Make sure you come to a complete stop before changing directions from forward to back.
• Please follow the correct weight and age limits allowed to drive this vehicle.
• It is prohibited to change the circuit or add other electric parts
• Inspect wires and connections of the vehicle periodically.
• In order to avoid accidents, please ensure the vehicle is safe before riding.
• Do not let any child touch the wheels or be near them when the car is moving .
• This vehicle has adjustable play seat belts. please instruct children how to tie the safety belt before using,
guarantee the security.
How To Operate Your Vehicle
Use Operation A
Audio input
(OPTIONAL)
Sound buttons
IMPORTANT!
Always stop vehicle
when changing the
speed or direction to
avoid damage the gears
and motor.
Power switch
Forward-backward
switch
Foot pedal
CONVERSION
Power
switch
SWITCH
2WD
H/L SPEED
Use Operation B
Audio input
(OPTIONAL)
Sound buttons
Power swtich
Foot pedal
Forward-backward
switch
High/Low speed
switch
CONVERSION
SWITCH
ADVANCED USE High speed Drive
Make sure your child
knows how to steer, how
to start and stop the
vehicle and knows the
rules for safe driving. The
vehicle can be driven at a
maximum of 3~5 km/h.
FORWARD
1.Press the “Forward-backward switch” on the “Forward” position.
2.Press the “Foot pedal”, the vehicle drives forward.
STOP
The vehicle will stop automatically, when your child’s foot remove from the “Foot pedal”.
REVERSE
1.Press the “Forward-backward switch” on the “Backward” position.
2.Press the “Foot pedal”, the vehicle drives backward.
SOUND BUTTON
Press the buttons on the steeirng wheel for sound playing.
HIGH/LOW SPEED SWITCH (OPTIONAL)
The switch operates the vehicle to move in low or high speed.
HOW TO USE THE REMOTE CONTROLLER
ADULT OPERATING REQUIRED
LEFT JOY STICK
ON-OFF SWITCH
INDICATOR LIGHT
RIGHT JOY STICK
ASSEMBLY
1. Insert the the antenna into the controller by tweak the antenna clockwisely;
2. Lift the the battery compartment door on the back of the controller and insert two
AA(LR6) batteries.
NOTE: This product does not includ the AA(LR6) batteries.
OPERATION
1. Press the CONVERSION SWITCH on the vehicle to the “Remote control” position.
2. Press the ON-OFF SWITCH on the remote controller to the “ON” position, the
indicator light will be lighting.
3. Push the LEFT JOY STICK to the front, the vehicle goes forward, pull the LEFT
JOY STICK to the back, the vehicle goes backward.
4. Push the RIGHT JOY STICK to the left, the vehicle turn left, push the RIGHT JOY
STICK to the right, the vehicle turns right.
Charging Your Vehicle
ONLY AN ADULT CAN CHARGE AND RECHARGE THE BATTERY!
WARNING!
• PREVENT FIRE AND ELECTRIC SHOCK:
- Use the only rechargeable battery and charger supplied with your vehicle. NEVER substitute the battery
or the charger with another brand. Using another battery or charger my cause a fire or explosion.
- Do not use the battery or charger for any other product. Overheating, fire or explosion could occur.
- NEVER modify the electric circuit system. Tampering with the electric system may cause a shock, fire or
explosion or my permanently damage the system.
- Do not allow direct contact between battery terminals. Fire or explosion can occur.
- Do not allow any type of liquid on the battery or its components.
- Explosive gasses are created during charging. Do not charge near heat or flammable materials. Charge
the battery in a well-ventilated area ONLY.
- NEVER pick up the battery by the wires or charger. Damage can occur to the battery and may cause a
fire. Pick up the battery by the case ONLY.
- Charge the battery in a dry area ONLY.
• Battery posts, terminals and related accessories contain lead and lead compounds, chemicals
known to the State of California to cause cancer and reproductive harm. Wash hands after
handling.
• Do not open the battery. Battery contains lead acid and other materials that are toxic and
corrosive.
• Do not open the charger. Exposed wiring and circuitry inside case may cause electric shock.•
Only adults may handle or charge the battery. NEVER allow child to handle or charge the
battery. Battery is heavy and contains lead acid (electrolyte).
• Do not drop the battery. Permanent damage to the battery could occur or cause serious injury.
• Before charging the battery, check for wear or damage to the battery, charger, its supply cord
and the connectors. DO NOT charge the battery if any damage to parts has occurred.
• Do not allow the battery to drain completely. Recharge the battery after each use or once a
month if not used regularly.
• Do not charge battery upside down.
• Always secure the battery with the bracket. Battery can fall out and injure a child if vehicle tips
over.
• The charging input socket is UNDER THE SEAT.
• The POWER SWITCH must be turned in OFF position when charging.
• Before the first use, you should charge the battery for 4-6 hours. Do not recharge the battery for more than
10 hours to avoid overheating the charger.
• When the vehicle begins to run slowly, recharge the battery.
• After each use or once a month minimum recharge time as 8 to 12 hours, less than 20 hours at most.
Charging Your Vehicle
1
1. Open the cover of the socket (the socket is under the rear light bar)
2. Plug the charger port into the input socket.
3. Plug the charger plug into a wall outlet. The battery will begin charging.
WARNING!
This product with CHARGING PROTECTION: When charging, all the functions will be cut off!
Troubleshooting Guide
■ PROBLEM: The vehicle does not run
PROBLEM CAUSE: The battery may low on power.
After each use, or once a month minimum, charge the battery for a full 10 hours. Do not leave the
battery on the charger for more than 20 hours.
POSSIBLE CAUSE: Thermal fuse has tripped.
The vehicle is equipped with a self-resetting fuse. When the vehicle is overloaded or operated
incorrectly; the self-resetting fuse will be cut off for 15-20seconds before becoming operational
again. The self-resetting fuse is under the seat (Refer to the picture.)
Fuse
To avoid the fuse cut off the power, follow these
guidelines:
DO NOT overload the vehicle, Maximum weight
allowed :30kg
DO NOT tow anything behind the vehicle.
DO NOT drive up steep slopes.
DO NOT drive into fixed objects, which may cause the
wheels to spin, causing the motor to overheat.
DO NOT drive in very hot weather, components may
overheat.
DO NOT tamper with the electric system, Doing so
may create a short circuit, causing the fuse to trip.
Battery
POSSIBLE CAUSE: Wheel nuts are loose.
If the nuts are not tight, the wheels will not engage the forward gears. Tighten the nut with the nut wrench.
POSSIBLE CAUSE: Battery connector or wires are loose.
Make Sure the battery connectors are firmly plugged in to each other.
POSSIBLE CAUSE: Battery is dead.
Have you properly maintained the battery according to the directions? Is the battery old? Your
battery may need to be replaced.
POSSIBLE CAUSE: Electric system is damaged.
Water may have corroded the system, or loose dirt, gravel or sand might have jammed the switch.
POSSIBLE CAUSE: Motor is damaged.
The motor needs professional repair.
■ PROBLEM: The battery will not recharge.
POSSIBLE CAUSE: Battery connector or adapter connector is loose.
Make sure the battery connector and adapter connector are firmly plugged together.
POSSIBLE CAUSE: Charger is not plugged in.
Make sure the charger is plugged into the wall outlet and the power flow to the outlet is on.
POSSIBLE CAUSE: Charger is not working.
Is the charger warm while charging? If not, the charger may be broken and may need to be replaced.
Troubleshooting Guide
■ PROBLEM: The vehicle does not run very long.
POSSIBLE CAUSE: Battery may be undercharged.
You may not be charging the battery long enough. After each use, or once a month minimum, charge the
battery for 8 to 10 hours. Do not leave the battery on the charger for more than 20 hours.
POSSIBLE CAUSE: Battery is old.
The battery will eventually lose the ability to hold a charge. Depending on the amount of use, and
varying conditions, the battery should operate for one to three years. Replace the battery with a
new one.
■ PROBLEM: Battery buzzes or gurgles when charging.
This is normal and not a cause for concern. It may also be silent when charging, which is also normal.
■ PROBLEM: Charger feels warm when recharging battery.
This is normal and not a cause for concern.
Maintaining Your Vehicle
• It is parents' responsibility to check main parts of the toy before using, Must regularly examine for potential
hazard, such as the battery, charge,cable or cord, plug, screws are fastening enclosure of other parts and
that in the event of such damage, the toy must not be until that damage had been properly removed.
• Make sure the plastic parts of the vehicle are not cracked or broken.
• Occasionally use a lightweight oil to lubricate moving parts such as wheels.
• Park the vehicle indoors or cover it with a tarp to protect it from wet weather.
• Keep the vehicle away from sources of heat, such as stoves and heaters. Plastic parts may melt.
• Recharge the battery after each use. Only an adult can handle the battery. Recharge the battery at least
once a month when the vehicle Raider is not being used.
• Do not wash the vehicle with a hose. Do not wash the vehicle with soap and water. Do not drive the vehicle
in rainy or snowy weather. Water will damage the motor, electric system and battery.
• Clean the vehicle with a soft, dry cloth. To restore shine to plastic parts, use a non-wax furniture polish. Do
not use car wax. Do not use abrasive cleaners.
• Do not drive the vehicle in loose dirt, sand or fine gravel which could damage moving parts, motors or the
electric system.
• When not using, all the electrical source should be turn off. Turn off the power switch and disconnect the
battery connection.
Disposal Of Battery
Disposal Of Batter y
● Your sealed lead-acid battery must be recycled or disposed of in an environmentally
sound manner.
● Do not dispose of your lead-acid battery in a fire. The battery may explode or leak.
● Do not dispose of a lead-acid battery in your regular, household trash. The incineration,
land filling or mixing of sealed lead-acid batteries with household trash is prohibited by
law.
● Return an exhausted battery to your local approved lead-acid battery recycle, such as a
local seller of automotive batteries.
● Contact your local waste management officials for other information regarding the
environmentally sound recycling and disposal of lead-acid batteries.
Our products are suitable for
ASTM F963; GB6675; EN71 and EN62115 standard.