S
> > >
mart Case
Fan Blue LED
Application for PC and CPU Fan
> > >
AI Function 1 :
Full Speed :
Leave the jumper in it's original position and make sure the speed control device is not connected (Photo 1). Photo 1
Temperature control function :
- Secure the sensor with the thermal tape included.
Note: 1. For K7 cooler, place the sensor underneath the processor.
You may bend the sensor for better fit (Photo 2).
2. For P4 & K8 cooler, we suggest to tape the sensor
underside of CPU heatsink (Photo 3).
- Remove the jumper and attach the temperature sensor
connector (Photo 4).
Photo 2
Photo 3
Photo 4
AI Function 3 :
Manual speed control function :
- Remove the jumper and attach the speed control connector (Photo 5).
- Replace the fan speed controller to free PCI slot by
the screw included.
Note :
- The direction of the airflow is as the arrow on the side of the fan.
- Avoid excessive pressure to the sensor !
Photo 5 www.thermaltake.com REVISION A. 2003.11