Mobile PATA
Spinpoint M5P
Capacity
Model
8 MB
60GB
80GB
120GB
160GB
HM061GC
HM080GC
HM121HC
HM160HC
FEATURES
• Max. 160GB formatted capacity per disk
• Ultra DMA Mode 5(UDMA100) Compatible
• TuMR/PMR head with FOD technology
• Support Automatic Acoustic Management(AAM)
• Load/Unload Head Technology
• ATA Security Mode Feature Set
• ATA S.M.A.R.T. Feature Set
• SilentSeek™
• NoiseGuard™
DRIVE CONFIGURATION
60GB/80GB/120GB/160GB
Capacity
UDMA 100
Interface
8 MB
Buffer DRAM Size2
512
Byte per Sector
5,400 RPM
Rotational Speed
ENVIRONMENTAL SPECIFICATIONS
Temperature
Operating
5 ~ 55 ℃
Non-operating
-40 ~ 70 ℃
Humidity (non-condensing)
Operating
5 ~ 90 %
Non-operating
5 ~ 95 %
Linear Shock (1/2 sine pulse)
Operating(2ms)
325 G
Non-operating(1ms)
1000 G
Vibration
Operating(10~500Hz)
0.7Grms
Altitude (relative to sea level)
Operating
-300 to 3000 m
Non-operating
-400 to 15000 m
PERFORMANCE SPECIFICATIONS
Average Seek time (typical)
Average Latency
Media Transfer Rate (Max.)
Interface Transfer Rate (Max.)
Drive Ready Time (typical)3
12 ms
5.6 ms
826Mbits/s
100MB/s
4 sec
RELIABILITY SPECIFICATIONS
Non-recoverable Read Error
1 sector in 1014 bits
600,000
Controlled Ramp Load/Unload
ACOUSTICS
Idle (typical)
Performance Seek (typical)
POWER REQUIREMENTS
Voltage
Spin-up Current (Max.)
Seek (typical)4
Read/Write (typical)
Low Power Idle (typical)
Standby (typical)
Sleep (typical)
2.2 Bel
2.4 Bel
PHYSICAL DIMENSION
Height (Max.)
Width
Length
Weight (avg.)
9.5 mm
69.85 mm
100 mm
96 g
* Note : Design and specifications are subject to change without prior notice.
+5V±5%
900 mA
2.1 W
2.0 W
0.6 W
0.25 W
0.1 W
1.1MB = 1,000,000 Bytes, 1GB = 1 Performance Seek 2.1 Bel
Accessible capacity may vary as some OS uses binary numbering system
for reported capacity
2 Upper 128 KB is used for firmware
3 Power-On to Drive Ready
4 30% duty cycle, random seek
5 Power requirements based on enabled DIPM & 1.5Gbps speed
2.5" HDD product specification Rev 1.0
Match with product manual Rev 00