1050mm

610mm

89mm

1018mm

Specifications

42XM3

42” Wide XGA Multimedia Display

Frame Area = 1018mm (40.1 inches)

Screen Area = 918mm (36.1 inches)

Screen Area =

1050m m (41.3 inches)

89mm (3.5)

42XM3 42” Wide XGA

Multimedia Display

The Latest Generation PlasmaSync™ 42XM3 family pushes the industry standards of picture performance to extremes, especially in both public and multimedia display applications.

Product Code

Screen Size

Aspect ratio

Resolution

Pixel Pitch

Colour Processing

Synchronization Range

Input Signals

Input terminal RGB

Input Terminal Video

Input Terminal HD/DVD/DTV

Input Terminals Audio

External Control

Wired Remote Input Terminals

Wired Remote Output Terminlas

Output Terminal Video

Output Terminal RGB of Y/Pb(Cb)/Pr(Cr)*

Audio Output Power for Speaker

Wide Control

Plug and Play

Power Sources

Current Rating

Power Consumption

Dimensions

Weight

Front Panel User Controls

Remote Control Function

OSM Function

Regulations

Environmental Operation

Environmental Storage

Accessories

Other Features

42XM3

918mm (H) x 518 (V) / 36.1" (H) x 20.4" (V) / Diagonal 1050mm, 42"

16:9

1024 (H) x 768 (V) pixels

0.897mm (H) x 0.675mm ( V) / 0.035" (H) x 0.027" (V)

4,096 steps, 68.7 billion colours

Horizontal: 15.5 to 110 kHz (automatic: step scan)

Vertical: 50.0 to 120.0Hz (automatic: step scan)

Video: Composite/S; DTV: Y,Pb(Cb),Pr(Cr); RGB; PC

RGB1 Mini D-Sub15pin x 1

RGB2 BNC (R,G,B,H/CS,V) x 1

RGB3 DVI-D 24pin x 1

Video 1 BNC 1pin (Composite Video input)

Video 2 RCA 1pin (Composite Video input)

Video 3 S-Video input: DIN 4-pin x 1

DVD1 / HD1 = RCA-pin (Y, PB[CB], PR[CR]) x 1

DVD2 / HD2 = BNC (Y, PB[CB], PR[CR]) x 1

DVD 3 / HD3 = DVI-D 24-pin x 1

Stereo RCA x 3 (selectable)

D-sub 9-pin x 1 (RS-232C)

3P plug

3P plug

BNC x 1 (shared with Video1 input, selectable)

Mini D-Sub15pin (shared with RGB1, selectable)

8W +8W (at 6 ohm)

Video input / RGB (PC) input

DDC1, DDC2b

100 to 240 V 50/60HZ

5.2A (Max)

305W (typical)

1018mm (W) x 610mm (H) x 89mm (D) / 40.1" (W) x 24.0" (H) x 3.5" (D)

29.5kg / 65.0 lbs

Power on/off, Input source select, Volume up / down / OSM control

Power (ON/STAND BY), Input Source Select (Video, DVD / HD,RGB / PC), Volume (up / down), Mute, Wide, Display, Off timer, Cursor (up, down, left, right),

Pointer, Zoom (up / down), Auto Adjust, ID Select, Clear

Picture: (Contrast / Brightness / Sharpness / Color / Tint / Picture Mode / Noise Reduction (NR) / Color temperature / White Balance / Gamma /

Low tone / Color Tune); Audio: (Bass / Treble / Balance / Audio Input x 3); Image Adjust: (Aspect Mode / V-Position / H-Position / V-Height

/ H-Width / AutoPicture / Fine Picture / Picture Adj); Option 1: (OSM / BNC Input / D-Sub Input / RGB Select / HD Select / Input Skip / All

Reset); Option 2: (Power Mgt / Cinema Mode / Long Life [PLE, Orbiter, Inverse, White, Screen wiper, Soft Focus] / Grey level / S1/S2 / DVI Set up);

Option 3: (Timer / Pwr on Mode / Control Lock / IR Remote / Loop Out / ID Number/ Video Wall); Advanced OSM: (On/Off); Language:

(English/Deutsch/Francias/Espanol/Italiano/Svenska/Chinese/Russian); Color System: (Auto / PAL / PAL-M / PAL-N/ PAL60 / SECAM/

4.43NTSC / 3.58NTSC); Source Info

IEC60950-1, EN60950-1, EN55022:1998+A1:2000 Class A, EN55024:1998+A1:2001, EN61000-3-2:2000, EN61000-3-3:1995+A1:2001, AS/NZS

CISPR22:2002 ClassA

Temperature: 0ºC to 40ºC / 32ºF to 104ºF

Humidity: 20 to 80% (no condensation)

Altitude: 0 to 2800m / 0 to 9180 feet

Temperature: -10ºC to 50ºC / 14ºF to 122ºF

Humidity: 10 to 90% (no condesation)

Altitude: 0 to 3000m / 0 to 9840 feet

Remote control with two AAA batteries, Power cable, User's Manual, Safety metal fittings, Screw for safety metal fittings, Ferrite cores, bands, Cable clamps

Motion Compensated 3D Scan Converter: (NTSC, PAL, 480i, 576i, 525i, 625i, 1035i, 1080i); 2-3 pull down Converter: (NTSC, 480i, 1035i,

1080i,(60Hz); 2-2 pull down Converter: (NTSC, 480i, 525i, PAL, 576i, 625i); Digital Zoom: (100-900% Selectable); Low tone: (3 mode);

Color Tempperature select (high/mid/mid low/low, user has 4 memories); Color Tune; Self Diagnosis: (RS232C commands);

Image Burn reduction tools (PLE LOCK1-3, INVERSE, WHITE, ORBITER, (Auto1,2/Manual), SCREEN WIPER, SOFT FOCUS); Control Lock;

IR Remote; Auto Picture; Input skip; Auto ID; Programmable Timer; Gamma Correction: (4 modes); Loop through interface;

Plug and play (DDC1, DDC2b, RGB3: DDC2b only)

PlasmaSync and OSM are trademarks of NEC Corporation. The plasma display panel consists of fine picture elements (cells). Although

NEC produces these plasma display panels with more than 99.99 percent of their cells active, there may be some cells that do not produce light or remain lit after they should have turned off. Light output of a PDP module gradually decreases over long-term use. Do not display static images for prolonged periods; otherwise a phosphor burn may appear on a part of the panel. Phosphor bur ns are not covered by the war ranty. Status September 2004. Specifications may change without notice.

NEC Deutschland GmbH [GERMANY]................................................Tel: +49 (0) 89 96274 144 Fax: +49 (0) 89 96274525 www.nec.de

NEC France S.A [FRANCE]..................................................................Tel: +33 (0) 1 46 49 46 49 Fax: + 33 (0) 1 47 69 92 86 www.nec.fr

NEC Iberica S.A.U [SPAIN]...........................................................................Tel: +34 91 203 2900 Fax: +34 91 650 1100 www.nec.es

NEC Italia s.r.l. [ITALY]..............................................................................Tel: +39 02 48 41 51 Fax: +39 02 48 40 08 75 www.nec.it

NEC Scandinavia AB [SWEDEN]................................................Tel: +46 (0) 8 635 92 00 Fax: +46 (0) 8 635 93 50 www.nec.se

NEC [UK] Ltd..............................................Tel: +44 (0) 845 234 4040 [email protected], www.nec.co.uk

PlasmaSync and OSM are trademarks of NEC Corporation.

For fur ther information, please contact: www.plasmasync.com

42XM3-SPEC-EN (Catalogue Number:100005289)