Axis T8125 POE MIDSPAN Data Sheet
Add to my manuals2 Pages
Axis T8125 is a midspan device that provides data and power to network products through an Ethernet cable. It is designed for 24 V AC installations and supports Axis PTZ domes. The device is plug-and-play, making it easy to install and use. It has a 1-port interface and can deliver up to 60 W of power, which is required for operating Axis Q60-E Network Cameras in temperatures below -20 °C (-4 °F). The Axis T8125 also features a local LED management display for easy monitoring of power and data connectivity.
advertisement
Datasheet
AXIS T8125 AC 24 V Midspan 60 W
For 24 V AC installations
Power over Ethernet (PoE) offers an easy, fast and cost-effective solution for powering network products. A midspan injects power and data to the network device with built-in PoE support. No need to replace existing Ethernet switches and cabling infrastructure. AXIS T8125 AC 24 V Midspan 60 W is a 1-port midspan that connects to a 24 V AC power source. It provides 60 W (two times IEEE 802.3at), which is required when operating e.g. AXIS Q60-E Network Cameras in temperatures below -20 °C (-4 °F). Cost-effective solution, since the system has no need for power cables and local AC wall adapters.
> IEEE 802.3at
> 24 V AC
> Support for Axis PTZ domes
> Plug-and-play
www.axis.com
AXIS T8125 AC 24 V Midspan 60 W
Midspans
Function Data and power are fed to a network video product through an
Ethernet cable
Use together with a PoE splitter for a network video product without built-in PoE support
Data rate
Installation and management
10/100/1000 Mbps
Automatically detects PoE and High PoE-enabled devices and supplies inline power
Local LED management display
Data & power
Power
Input power
High Power over Ethernet, max 60 W
AC Input Voltage:
24 V AC +/- 20% (max 80 W)
AC Frequency:
50–60 Hz
Max. output power
Connectors
55 V DC (max 60 W)
Shielded RJ45, EIA 568A and 568B
2–pin AC terminal power connector
Network cables Shielded category 5 (or higher)
Wiring Data provided over pairs 1/2 and 3/6 for 10/100 Ethernet, over all four pairs for Gigabit Ethernet
Power over pairs 1/2 (-), 3/6 (+), 4/5 (+) and 7/8 (-)
General
Display and indicators
Mounting
Operating conditions
Approvals
Dimensions
Weight
Included accessories
Optional accessories
Warranty
Port interfaces are located on the front panel
AC LED: Power indicator
Port LED: Data connectivity
Wall, shelf or DIN rail a
-10 ºC to 40 ºC (14 ºF to 104 ºF)
At 30 W:
-10 ºC to 50 ºC (14 ºF to 122 ºF)
Humidity max 95% RH (non-condensing)
RoHS, REACH, WEEE, CE, EN 55022 Class B, EN
55024, FCC Part 15 Subpart B Class B, VCCI Class B,
RCM AS/NZS CISPR 22 Class B, KCC KN22 Class B, KN24,
IEC/EN/UL 60950-1, GS, CB
43 x 84 x 166 mm (1.7 x 3.3 x 6.5 in)
450 g (1 lb)
AXIS Connector A 2-pin 5.08 Straight
AXIS Midspan DIN Clip A
Axis 3-year warranty, see www.axis.com/warranty a. Sold as optional accessory
Environmental responsibility: www.axis.com/environmental-responsibility
©2013 - 2017 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies. We reserve the right to introduce modifications without notice.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project