Fujitsu PRIMERGY RX300 S4 Datasheet

Add to my manuals
2 Pages

advertisement

Fujitsu PRIMERGY RX300 S4 Datasheet | Manualzz
Issue
PRIMERGY RX300 S4
Dual Socket, Quad-Core, Xeon® 2U based Rack
Server – Compact capacity in central service
to your departments
Pages
February 25, 2008
2
PRIMERGY RX servers are perfect answers for an IT strategy that seeks to downsize data center infrastructure costs
by enhancing transparency of structure, management overhead and maximize the use of investments.
With RX rack servers and the PRIMECENTER rack enclosures, you benefit from our renowned experience in data
center technology, which assures the best quality of dynamic data center operation. To guarantee heterogeneous data
center assets, the PRIMECENTER modular design accommodates seamless integration of Solaris based Server
compute nodes, storage SAN and NAS subsystems, as well as other infrastructure components such as hubs, KVM
switches and more, using a universal power circuit structure.
Cost-effective scaling, simplified operation and enhanced quality of data center IT production are the main benefits in
deploying PRIMERGY RX servers. Their centralized PRIMERGY ServerView Suite management functions mean less
troubleshooting and costs and remote access from anywhere at any time. The flexible custom supply model and our
build-to-order process means that only fully built and pre-tested rack solutions are shipped to the customer –
shortening your time to production.
PRIMERGY RX300 S4
PRIMERGY RX300 S4 rack server packs the capacity of a
fully-featured departmental server into a rack design only 2 U
in height. It is offering the breakthrough performance features
of leading edge Dual- or Quad-Core Intel® Xeon®
5200/5300/5400 series CPUs embedded in a powerful design
with an 8-port SAS controller and fast PCIe links and PCI-X
busses. Expandability is covering for nearly any workload: 48
GB FBD667 memory, up to 12x 2.5 inch or up to 6x 3.5 inch
SAS hard disk drives, and 6 free PCIe and PCI-X slots for
heavy I/O requirements perfect for virtualization tasks.
To guarantee its high availability level, PRIMERGY RX300 S4
delivers: redundant hot-plug power supply and fans option,
Hot-pluggable hard disk drives and a modular RAID. Special
attention is given to secure memory data, with SDDC hotspare and memory mirroring option. The „Cool-safe™“
technology secures optimal temperatures even at peak
workloads, such ensuring longevity and extended Mean Time
Between Failures. With this built-in failsafe functionality
PRIMERGY RX300 S4 is suited ideally to meet demands for
continuous operation in business critical environments,
running data bases, terminal services, business applications
or consolidation and virtual machine tasks.
Benefits
Key Features
Higher overall productivity through outstanding Dual/Quad-Core performance with fast FSB, large L2 cache
etc. 64-bit computing for demanding applications, with
full compatibility for 32-bit legacy applications, ideal for
database applications
Fast communication path through usage of PCI-Express
Highest flexibility on basis of latest I/O technologies for
consolidation of data and applications.
Dual- or Quad-Core Intel Xeon 5200/5400 series and 6/
2x 6 MB SLC offer outstanding Dual- or Quad-Core
performance and balanced architecture that incorporates
latest memory and I/O technologies
PCI-Express attached onboard 2x Gbit/s Ethernet LAN and
modular RAID controller in PCIe slot
Internal max. 6x 300 GB SAS / 6x 750 GB SATA 3.5“ HDD
or up to 12x 146 GB 2.5” SAS HDD, all hot-plug
6 free PCIe and PCI-X slots
Hot-plug, redundant power supply and fans options,
Hot-plug hard disks, modular RAID5, LSP module option
Integrated Remote Management Controller (iRMC), IPMI 2.0
No-break repair service saves cost,
reduces planned and unplanned downtimes
Comfort and security for continuous operation
Data Sheet  Issue: 2/28/2008 PRIMERGY RX300 S4
Type
System board
Chip set
Processors
Frequencies (GHz)
Dual Socket Rack Server
D 2519
Intel® 5000P
Dual- or Quad-Core Intel® Xeon® (1 – 2)
5148 (2.33) LV 40W DC / E5205 (1.86) 65W;
X5260 (3.33) 80W DC / L5310 (1.60), L5335
(2.00) L5410 (2.33), L5420 (2.50) 50W QC /
E5405 (2,00), E5420 (2.50), E5430 (2.66
GHz), E5440 (2.83), 80W, X5460 (3.16)
120W QC
1066 (E5205, L5310), 1333 MHz
Front-Side-Bus/
Socket
Second-Level-Cache 4 MB (51xx), 2x 4 MB (53xx), 6 MB (52xx),
2x 6 MB (54xx) ECC
Memory
1 Gbyte up to max. 48 Gbyte
4-way interleaved, FullyBuffered DIMM DDR2 PC2-5300F; ECC;
2 boards (1x standard), 12 slots divided into 2 branches with 2
channels each and 3 slots per channel for PC2-5300F modules with
512, 1, 2 and 4 GB; SDDC, Memory Mirroring and hot-spare option,
memory upgrade only possible per branch with module pairs
Flash-EPROM
Local BIOS update with floppy disk; Remote BIOS-Update via LAN
with Global Flash and service partition
Interfaces
Serial
1x RS-232-C (9-pin) (usable for iRMC
or system or shared)
Serial (option)
1x RS-232-C (9-pin) occupies PCI-slot 1
Parallel (option)
Centronics, 25-pin, EPP/ECP comp.
(occupies PCI-slot 5)
Keyboard, Mouse
2x PS/2
USB 2.0
2x front, 2x back; (OHCI, 480 Mbit/s)
2x internal
Graphics
1x VGA (15-pin)
LAN
2x RJ45, 1x Service10/100 (can be switched
on Gbit LAN port)
Front Panel
On/off switch; NMI-, reset button; LEDs for global error (amber/
yellow for Health and CSS), identification (blue), hard disks access
(green), power (amber/green); (back: global error, identification, LAN
activity, LAN mode)
Onboard controller **
ESB2-T
2 x SATA channel for DVD + backup
SAS configuration
8 port SAS for internal HDD´s and internal
in internal PCIe slot backup devices with
either (LSI 1068)
RAID 0, 1 (Integrated Mirroring Enhanced
also for odd numbered HD´s for Windows
and Linux)
or LSI 1078
with RAID 0, 1, 10, 5, 50, 6, 60 (256 or 512
MB RAID Cache and opt. BBU)
LAN
2x 10/100/1000 Mbit/s Ethernet (TCP/IP
(2x BroadCom5708)
accelerator)(PXE-Boot via LAN from PXE
server), iSCSI Boot (also diskless) via
onboard LAN
Server management Integrated Remote Management Controller
(iRMC S2) incl. graphics controller, IPMI 2.0
compatible
TPM (option)
Infineon / 1.2
Hard disk drives
36, 73, 146, 300 Gbyte 3.5-inch SAS or
(all hot-plug)
250, 500, 750 Gbyte 3.5-inch SATA or 36,
73, 146 Gbyte 2.5-inch SAS optional (no
later conversion 3.5 to 2.5-inch)
1 Gbyte equals one billion bytes when referring to hard disk drive capacity; accessible
capacity may vary.
I/O Slots
5x PCIe x8, x4 wired low profile (from 4 PCIe slots each two wired x4
slots can be combined to one wired x8 slot)
1 x PCI-X 64-bit / 133 MHz, low profile; 3.3 V
Drive bays
for hard disks
6x 3,5/1-inch, for SAS / SATA or
6 or 12x 2,5/1-inch for SAS optional
All rights reserved, including intellectual property rights. Technical data subject to modifications and
delivery subject to availability. Any liability that the data and illustrations are complete, actual or
correct is excluded.
Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which
by third parties for their own purposes may infringe the rights of such owner.
For further information see http://www.fujitsu-siemens.com/terms_of_use.html
Copyright © Fujitsu Siemens Computers 03/2008
Page 2 / 2
for optional
accessible drives
1x 5.25/0.5-inch, for CD or DVD-ROM
1x 3.5/0.5-inch for LSP or LSD or FD
1x 3.5/1.6-inch for backup occupies 2x 3.5 or
6x 2.5-inch HDD bay
System fan units (hot-plug)
Standard / redundant (option): 1 + 1 units, 4 fans each
Electrical values
1x Hot-plug power supply unit as standard.
Additional hot-plug unit for redundancy option
Output power
700 W / 1 + 1 x 700 W each
Rated voltage range
100 - 240 V
Rated frequency
50-60 Hz
Max. rated current
100 V - 240 V / 8.0 A – 3.5 A
Rated current in basic
100 V - 240 V / 4.2 A – 1.4 A
configuration
Active power
726 W
Apparent power
737 VA
Heat emission
2614 kJ/h (2477 btu/h)
Temperature/Noise/Dimensions/Weight
Ambient temperature
10°C - 35°C (DIN IEC 721-3-3) class 3K2,
ETSI 300 019-2-3 Class 3.1
Declared noise emission idle*
operating* *(ISO 7779)
according to ISO 9296
ETSI 300 753 Class 3.1
LWAd (1 B = 10 dB)
6.9 B
6.9 B
LpAm (bystander position)
52 dB
52 dB
Overall measures
85.9 * 482.6 * 785 (mm); (HxWxD)
Rack mount depth / U:
745 mm / 2 U,
Rack cable depth:
100 mm (900mm Rack recommended)
Rack integration kit
inclusive telescopic rails as part of the
standard delivery
Weight
~ 25 kg (configuration dependent)
Compliance with Norms and Standards
Product safety
Global / Europe
IEC 60950-1 / EN 60950-1
USA
UL 60950 3rd. Ed.
Canada
CAN/CSA-C22.2 No. 60950-1
Electromagnetic compatibility
This product and the released accessories, are in compliance with
emission class A. In certain cases measures have to be taken to reduce
the electro magnetic influence to other equipment.
Europe
EN 55 022 class A, EN 55024,
EN61000-3-2 / -3-3, ETSI EN300386
Taiwan / Japan
BSMI class A; VCCI class A /JEIDA
Australia / New Zealand C-Tick class A
USA / Canada
FCC class A
Declaration of conformity
Europe (CE)
89/336/EEC(EMV);73/23 EEC(LVD)
North America
FCC class A
Approvals
Product safety
Global / Europe
CB / CE
USA / Canada
CSAUS / CSAC
There is general compliance with the safety requirements of all
European countries and North America. National approvals required
in order to satisfy statutory regulations or for other reasons, can be
applied for on request.
Supported operating systems
See actual release status operating systems: e.g. Windows 2003;
Novell SUSE Linux Enterprise Server , Red Hat Enterprise Linux;
VMware Infrastructure (Support of Debian, Ubuntu, Mandriva Linux
and other Linux derivatives on demand)
** For supported controllers (onboard and PCI cards for SAS, SATA,
RAID, LAN, WAN, etc.), please refer to the corresponding system
configurator
Server Management (see separate data sheets)
Standard:
PRIMERGY ServerView Suite; PDA, ASR&R
Optional
ServerView Local Service Panel (LSP) or Local
(excerpt):
Service Display (LSD), ServerView Remote
Management, iRMC S2 Advanced Pack
Published by
Fujitsu Siemens Computers
http://www.fujitsu-siemens.com/
Company stamp

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement