- No category
advertisement
TECHNOLOGIES
LM506 Bluetooth Smart Ready Dual Mode Adapter
Host Controller Interface (HCI) via USB Interface
OSX XP Vista 7 8 10
Product
Part No
Revised
LM506
506-0508
21/JUL/2016
16mm
19.47mm
Features
Bluetooth v4.0 (Backwards compatible with Bluetooth 2.0, 2.1 and 3.0)
0 dBm (Bluetooth Classic) and 4.7 dBm (Bluetooth Smart) Tx Output Power
USB 2.0 (Full Speed) for data and power source
Host Controller Interface (HCI)
Plug and Play (OSX, Linux and Windows XP – 10 compatible) iBeacon compatible
Voice and Data Application support
(including VoIP over Bluetooth)
Stereo Audio supported
19.47mm x 16mm x 8.1mm
FCC, CE/ R&TTE, TELEC and SIG Certified Solution
RoHS, REACH and WEEE Compliant Solution
Overview
The LM506 Bluetooth Smart Ready adapter is a small, simple and highly compatible solution. A plug and play USB adapter, compatible with Linux, MAC OSX and Windows XP – 10 platforms. Allowing your host computer to wirelessly communicate with other nearby
Bluetooth Classic and Bluetooth Smart enabled devices (such as the iPhone and Android devices). Providing a low energy connection and high quality data stream.
The LM506 has many possible uses e.g. within an iBeacon and a data logger. Typically used in industries such as EPOS, M2M and automotive. And is ideal for developing voice and data applications.
The adapter has a Host Controller Interface (HCI) for a simple connection via USB to a host computer or MCU.
LM506
Page 1 of 4
+44(0) 207 428 2647 www.lm-technologies.com | [email protected]
TECHNOLOGIES
LM506 Bluetooth Smart Ready Dual Mode Adapter
Host Controller Interface (HCI) via USB Interface
General Specification
Wireless
Bluetooth Standard
Firmware
OS Compatibility iBeacon Compatible
Hardware
Chipset
Antenna
Interfaces
Power Supply
Crystal Oscillator
LED Indicator
Broadcom
IC Antenna Onboard
USB 2.0 (Full Speed)
5V DC (USB powered)
20 MHz
Power/ Active (BLUE)
Product
Part No
LM506
506-0508 v4.0 (Backwards Compatible)
Host Controller Interface (HCI)
OSX (Apple’s Bluetooth Stack), Linux (BlueZ) and Windows XP – 10 (Widcomm)
Yes
RF Characteristics
Tx Output Power
Rx Sensitivity
Current Consumption
Continuous RX
Bandwidth/ Speed
Frequency
Modulation Scheme
Spread Spectrum
Physical Characteristics
Operating Temperature
Dimensions (L x W x H)
Weight
Certifications
Compliance
0 dBm (Bluetooth Classic) and 4.7 dBm (Bluetooth Smart)
-82 dBm (Bluetooth Classic)
TBA
TBA
Up to 3Mbps
2.4GHz to 2.485 GHz
GFSK for 1 Mbps, π/4-DQPSK for 2 Mbps, 8-DPSK for 3 Mbps
FHSS (Frequency Hopping Spread Spectrum)
-30°C to +85°C
19.47mm x 16mm x 8.1mm
1.8 g
FCC, CE/ R&TTE, TELEC and SIG
RoHS, REACH and WEEE
LM506
Page 2 of 4
+44(0) 207 428 2647 www.lm-technologies.com | [email protected]
TECHNOLOGIES
LM506 Bluetooth Smart Ready Dual Mode Adapter
Host Controller Interface (HCI) via USB Interface
LM506 Packaging Options
506-0518 LM506 Bluetooth USB Adapter
1 x LM506 Plug & Play USB Adapter
Product
Part No
LM506
506-0508
HCI Architecture
Within the Host Controller Interface (HCI) Architecture, the LM506 runs the HCI Firmware, Link
Manager Firmware and baseband controller.
The host operating system runs the Bluetooth
Classic/ Smart user application. It also runs the
Bluetooth Stack (HCI Driver), USB Driver and other necessary drivers.
The Bluetooth Stack (HCI Driver) exchanges data and commands with the HCI firmware via the USB interface.
The LM506 is plug and play and compatible with the
OSX, Linux and Windows XP – 10 platforms.
The Bluetooth Stack is in-built into the operating system.
With the Widcomm Bluetooth Stack Software specifically designed for the Broadcom chipset within the LM506.
The table below shows the supported BR/EDR and
GATT (LE) profiles:
User Application
BLUETOOTH HOST
Other High Layer Drivers (optional) eg: Virtual COM Port, Printer Driver
HCI Driver
Bluetooth Stack: BlueZ, Widcomm, OSX Stack
USB Driver
PHYSICAL BUS
USB Firmware
HARDWARE
BLUETOOTH CONTROLLER
HCI Firmware
Link Manager Firmware
Baseband Controller
Firmware Software Hardware
Host Computer / MCU
USB Port
USB Type A Connector
LM506
Host Operating System
OSX
Linux
Windows XP - 10
Bluetooth Stack *
OSX Bluetooth Stack
BlueZ
Widcomm
Profiles Supported
DUN, SPP, FAX, HID, HSP, SYNC, PAN, BPP, OBEX, A2DP, AVRCP
PXP, HTP, HOGP, TIP, CSCP, FTP, OPP, PBAP, MAP, HFP, A2DP, AVRCP,
DI, HDP, HID, PAN, SPP
PAN, SPP, DUN, OPP, HID, OBEX, HCRP,
[Win 8 – 10 only: HFP, A2DP, AVRCP]
*NOTE: Third-party Bluetooth Stack Software can be used as an alternative to the in-built Bluetooth Stack for more supported profiles.
LM506
Page 3 of 4
+44(0) 207 428 2647 www.lm-technologies.com | [email protected]
TECHNOLOGIES
LM506 Bluetooth Smart Ready Dual Mode Adapter
Host Controller Interface (HCI) via USB Interface
Dimensions
11.5mm
14.47mm
Top View
16mm
3D View
19.47mm
19.47
Product
Part No
LM506
506-0508
8.1mm
Side View Front & Back View
PXP, HTP, HOGP, TIP, CSCP, FTP, OPP, PBAP, MAP, HFP, A2DP, AVRCP,
DI, HDP, HID, PAN, SPP
LM506
Page 4 of 4
+44(0) 207 428 2647 www.lm-technologies.com | [email protected]
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project