Samsung SPF-105P Digital Photo Frame

| Safety Symbols | Power | Installation | Using and Cleaning |
Safety Symbols
Make sure to follow the directions below to prevent accidents and damage to the product.
Failure to follow the accompanying directions may lead to serious injury or death.
Failure to follow the accompanying directions may lead to minor personal injury or property damage.
| Safety Symbols | Power | Installation | Using and Cleaning |
Power
The images here are for reference only, and are not applicable in all cases (or countries).
Insert the power plug correctly until it is firmly in place.
z
Failing to do so, may cause fire.
Do not use a damaged power plug, cord or outlet, as this may cause electric shock
or fire.
Do not touch the power plug with wet hands, as this may cause electric shock.
Do not connect more than one appliance to a single outlet, as an overheated outlet
may cause fire.
Do not use force to pull the power cord. Don't place anything heavy on the power
cord, as this may cause electric shock or fire.
z
Failing to do so, may cause electric shock or fire.
Make sure to turn the power off and disconnect the power plug from the outlet
before moving the product. Make sure to disconnect the connection cables from
other devices as well.
z
Moving the product without disconnecting the power cord may damage it while
moving, and may cause electric shock or fire.
Hold and pull out the plug by its body when disconnecting it from the outlet, as
pulling the plug out by the cord may cause it to be damaged.
z
Failing to do so, may cause fire, or the product may not turn on normally.
Ensure that the power plug is disconnected before cleaning the product.
z
Failing to do so, may cause electric shock or fire.
Keep the product away from places exposed to oil, smoke or moisture; do not
install inside a vehicle.
z
This may cause a malfunction, electric shock or fire.
z
In particular, avoid operating the monitor near water or outdoors where it could be
exposed to snow or rain.
Do not install the product near any heating appliance.
z
There is a risk of fire.
| Safety Symbols | Power | Installation | Using and Cleaning |
Installation
When installing the product on a cabinet or shelf, do not let the front end of the
product project beyond its front edge.
z
Failing to do so, may cause the product to fall, resulting in a product malfunction or
personal injury.
Do not place the power cord near a heater, as the power cord may melt, causing
electric shock or fire.
Do not install the product in a car or a location exposed to oil, smoke, moisture,
water, or rainwater.
z
Any contact of these materials with the product may cause electric shock or fire.
Disconnect the power plug when there is thunder or lightning.
z
Failing to do so, may cause electric shock or fire.
Place the product down gently when installing it.
z
Failing to do so may cause product damage or personal injury.
Avoid dropping the product when moving, as this may cause product damage or
personal injury.
Do not install the product in a location easily reached by children.
z
As the product may fall and cause personal injury.
| Safety Symbols | Power | Installation | Using and Cleaning |
Using and Cleaning
Do not insert any metal objects such as forks, wire, or gimlets, or flammable items
such as paper or matches into the ports at the back of the product, as this may
cause electric shock or fire.
z
If water or any foreign substance enters the product, make sure to turn the product
off and disconnect the power plug from the outlet, and contact a service center.
Never disassemble, repair, or modify the product yourself.
z
If you need to repair your product, contact a service center. An attempt at repairing
this product may cause electric shock or fire.
If you hear a strange sound, smell anything burning, or see smoke, disconnect the
power plug immediately and contact a service center.
z
Failing to disconnect the power plug may cause electric shock or fire.
Always remove dust and water from the pins and connections of the power plug.
z
Failing to do so may cause electric shock or fire.
When cleaning the product, first disconnect the power plug and clean it with a soft,
dry cloth.
z
Do not use any chemicals such as benzene, alcohol, thinners, mosquito repellant,
aromatic, lubricant, detergent or wax.
When not using the product for a long time, make sure to disconnect the power plug.
z
Heavy accumulated dust may cause electric shock or fire.
If the product needs to be installed in a location that doesn't satisfy general
conditions, make sure to contact one of our service engineers about the installation
as the product may encounter serious quality problems due to its environment.
z
This refers to locations exposed to conditions such as heavy fine dust, chemicals, high or
low temperature, moisture, or when the product needs to be used continually without a
break over a long time.
If the product has been dropped or the product casing is damaged, turn it off and
disconnect the power plug.
z
Using the product without verifying that it has not been damaged may cause electric
shock or fire. Please contact a service center.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) - Europe only
(Applicable in the European Union and other European countries with separate
collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed
with other household waste at the end of its working life. To prevent possible harm to the
environment or damage to health from uncontrolled waste disposal, please separate this from
other types of waste and recycle it responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for
environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial wastes for
disposal.
| Features | Components | Front | Back | Side/Bottom |
Features
Expansion of built-in memory using memory cards. Instant view of stored images
Background music function.
Can be used for a specific period of time with the battery only without being connected to a power outlet
Provides the Mini-Monitor function.
Stylish design
Premium stylish appearance design product that can be used a decoration on a desk or table
Rotating stand allowing vertical/horizontal placement
| Features | Components | Front | Back | Side/Bottom |
Please check that all components are contained in the delivered package.
If anything is omitted, contact the local distributor where the product was purchased. For optional items, contact a service center.
Never use a power adapter other than the adapter provided with the product.
Components
Digital Photo Frame
(The product color and shape may vary depending on the model.)
Manual
Quick Start
Cables
Warranty
(Not available in all locations)
User Manual
Power cord
USB cable (A-B type)
Power Adapter
| Features | Components | Front | Back | Side/Bottom |
Front
The product color and shape may vary depending on the model.
This product is a touch type product. If you lightly touch the button on the right of the product, the button light is
turned on. When the button light is turned on, you can then operate each button's menu.
[MENU] Menu Button
Displays the menu window at the bottom left corner of the screen.
[
] Up Button
Used for moving up.
[ ] Left Button
Used for moving left.
[ ] Right Button
Used for moving right.
[
] Down Button
Used for moving down.
[
] Enter Button
Used for selection
[
] Back Button
Returns to the previous menu.
[
] SlideShow Button
Starts a slideshow.
| Features | Components | Front | Back | Side/Bottom |
Back
The product color and shape may vary depending on the model.
Power terminal
[
] Power Button
Connect the power adapter to this jack.
Connect the power cord to the power terminal of the power adapter.
Turns the product on or off.
Stand
You can use the product in a vertical or horizontal direction by using the rotating stand.
Sliding Prevention
Supports the product so that it stays firmly in place on slippery surfaces.
Holder
Service terminal
This is a terminal for servicing only. Do not operate it arbitrarily.
Kensington lock
public place. (The locking device has to be purchased separately.)
The Kensington lock is a device used to physically secure the system when using it in a
| Features | Components | Front | Back | Side/Bottom |
Side/Buttom
The product color and shape may vary depending on the model.
Speaker
You can listen to sound without connecting an additional speaker.
You can listen to sound by connecting headphones or earphones to the product.
Headphone connection
jack
Memory Card Slot
Allows you to insert an optional memory card. (Only applicable for SD/MMC/MS/CF card)
CF
Connect a PC or an external device using a USB cable.
Up stream terminal
Connect your Digital Photo Frame to a PC's USB terminal
with a USB cable.
Make sure to use the USB cable (A-mini B type) provided with the product when
connecting your digital photo frame to a PC through the up stream terminal.
Down stream terminal
Connect your Digital Photo Frame to a USB-supported
storage device.
| Power | USB | Memory Card |
Power
Connect the adapter cable to the
terminal on the back of the product.
Connect the power cord to the power adapter.
Plug the power cord for the product into a nearby outlet.
Press the [
] button to turn on the power.
| Power | USB | Memory Card |
USB
Up Stream
Terminal
Used to connect your digital photo frame to a PC.
When connecting your digital photo frame to a PC through the up stream terminal, make sure to use
the USB cable provided with the product.
Down Stream
Used to connect an external USB-supporting device to your digital photo frame.
Terminal
If you connect your USB memory stick product to a USB hub or USB extension, it may not be
recognized. Therefore, make sure that the USB memory stick is inserted directly into the USB port.
When connecting an external device to the down stream terminal, use the USB cable provided with
the external device. (For more information on external devices and their cables, contact a relevant
service center.)
Samsung carries no liability for external device malfunctions caused by using any cable except the
standard cables specified for each device.
Some external products provide a cable that does not meet USB standards. Hence, they may cause a
malfunction.
If an external storage device does not work normally when connected to your digital photo frame, try
to connect it to your PC. If it still does not work normally when connected to your PC, contact a
service center for that external device or your PC.
Connect to the up stream terminal of your digital photo frame.
Connect the USB terminal of your PC.
| Power | USB | Memory Card |
Memory Card
CF
Slide the card in the direction marked on the top of the card.
If no button is pressed for ten (10) minutes, Slideshow or Clock mode is activated. However, if a music file is being played,
Clock mode is activated and the filename of that music file is displayed.
This product is in a touch type. If you touch the button part on the right of the product lightly, the button light is turned on.
When the button light is turned on, if you touch each button it will operate.
| Usage Guide | Photo | Music | Clock & Alarm | Settings |
Usage Guide
Direct Functions
Button
Description
Enters or exits a menu.
Hold the MENU button down for more than five (5) seconds. All the lights of the buttons will blink
MENU
twice and the button lock function will be activated. To clear the button lock function, hold the
MENU button down again for more than five (5) seconds.
,
Moves around the items and adjusts a value.
, ,
Selects a function you want to use.
Returns to the previous screen.
Hold down this button for two (2) seconds to return to the Main screen.
Starts a slideshow.
When playing a slideshow by pressing the [ ] button, the photos in the location of the last
played photo are played. If the photos in the location of the last played photo have been removed,
they are automatically searched for and then played in a slideshow.
Screen Status Indications
Display
Description
Displayed when a USB device is connected.
Displayed when an SD/MMC/MS memory card is connected.
Displayed when an CF memory card is connected.
Battery Indications
Display
Description
Displayed when the battery is being used with the power cable connected and being charged.
Displayed when the battery is charged fully and the power cable is connected.
Displayed when the battery is charged fully.
Displayed when about 25% of the battery is consumed.
Displayed when about 50% of the battery is consumed.
Displayed when about 75% of the battery is consumed.
9Displayed when about 95% of the battery is consumed.
Displayed when about 95% of the battery is consumed. The screen displayed when it happens switches to the main
screen immediately and the discharged battery icon blinks at the center of the screen and the power is turned off.
While the discharged battery icon is blinking, you cannot enter a submenu.
It takes about two (2) hours to charge the battery fully from a completely discharged state.
The slideshow can continue for about one (1) hour in the default state (Volume 70, Brightness 70) when the battery is fully
charged.
The battery usage time may be different according to the setting conditions (Brightness, Volume etc.).
If the product is turned off automatically because the battery is fully discharged, the time you set before is erased in one
hour. In this case you should set the time again. If you connect your product to a power outlet within one hour, the time
information is retained.
The battery lifetime becomes shorter as the product use time becomes longer.
The battery is embedded in the product. If you want to replace it, never do it yourself and make sure to contact a service
center.
| Usage Guide | Photo | Music | Clock & Alarm | Settings |
Photo
When selecting a folder
If you press the Menu button, the menu of the selected item is displayed on the screen.
Menu
Description
Open
Opens the selected folder.
Copy
Copies the selected folder.
Delete
Deletes the selected folder.
The menu displayed when selecting a thumbnail
If you press the Menu button, the menu of the selected item is displayed on the screen.
Sub Menu
Menu
Start Slideshow
Description
Starts a slideshow
Copy
Copies the selected file to a different storage device. (Activated when a storage device is connected.)
Copy All Files
Copies all files to a different storage device. (Activated when a storage device is connected.)
Delete
Deletes the selected file.
Delete All Files
Deletes all files.
Sets the selected image as the background of the main screen.
Set as Background
At this time the setting mode for the background is changed to Custom mode automatically.
When copying a photo from an external memory storage device (SD/MMC/MS, USB memory) to the Frame Memory, if the
[Settings]-[Options]-[Frame Memory Copy] is set to the [Resized], the size (screen quality) of the photo is automatically
reduced before saving so that it can be displayed with fit to the screen of your digital photo frame and the EXIF (camera
related information) saved in the photo is removed. Thus, make sure to use the photos saved in the Frame Memory only with
the digital photo frame.
It may take a long time if a lot of files are copied at a time.
Slide Show
If you press the Menu button, the menu of the selected item is displayed on the screen.
Only photos with a resolution of less than 8000 (width) * 8000 (height) pixels can be displayed on the screen.
Upper OSD
Sub OSD
Detail OSD
Description
No Effect, Fade, Blind, Cross Comb, Mosaic, Checker, Dissolve, Wipe, Extend,
Effect
Silk, Corner, Wheel, Ellipse, Random
Select an effect to give when displaying images on the screen.
Fast, Normal, Slow
Speed
Slide Show Settings
Select a speed among Fast, Normal, and Slow.
All photos, Photos in Folders, Shuffle photos in folders, Repeat one photo
Mode
Select the Repeat for displaying images.
Display Clock
On, Off
Selects whether to play a slideshow and show the current time at the same time.
Brightness
0~100
Adjust brightness from 0 to 100 levels.
Rotate
Original, 90°, 180°, 270°
Select one among Original, 90°, 180°, and 270°.
x1, x2, x4
Zoom
Select this if you want to zoom into a photo. You can magnify it to the x2 or x4 size.
The x1 size is when the photo is set to Fit to Width.
Original Fit, Auto Fit, Fit to Width, Fit to Screen
You can select how to adjust the sizes of photos when displaying them on the screen.
Aspect Ratio
Original Fit
: When the photo size is larger than the screen size, it is displayed to fit the screen size.
Auto Fit
: If the photo size is larger or smaller than the screen size, it is resized to fit
Fit to Width
: Photos are displayed with fit to the screen width. A horizontal or vertical part of
Fit to Screen
: Photos are displayed with fit to the resolution of 800*600.
the screen size.
a photo may be displayed cut but there is no distortion.
(There may be a distortion in photo image.)
Delete
Set as Background
Deletes a photo being displayed in the slideshow.
Sets the currently selected image as the background of the main screen.
On, Off, Music Setting
If you select [Settings] from [Background] by pressing the MENU button, the music files in the folder of
Background Music
the last played music file are played as the background music. (If the background music files in the folder
of the last played music file have been removed, they are automatically searched for and played.) To set a
music file as background music, select [Music Settings] from [Background Music] and select a music file
from the Frame Memory or the connected external storage device.
Direct Functions (Slide Show)
Menu
MENU
Description
Opens the on-screen menu and exits from the menu.
Plays the next file.
Plays the previous.
Adjusts the volume.
Plays and Pauses a file.
Starts a slideshow.
| Usage Guide | Photo | Music | Clock & Alarm | Settings |
Music
The menu displayed when selecting a list
If you press the Menu button, the menu of the selected item is displayed on the screen.
Sub Menu
Menu
Play Music
Play Mode
Description
Plays a file.
All musics, Music in Folder, Shuffle all musics, Shuffle music in Folder, Repeat one music
Selects a play mode.
Copy
Copy All Files
Delete
Delete All Files
Copies the selected file to a different storage device.
(Activated when a storage device is connected.)
Copies all files to a different storage device.
(Activated when a storage device is connected.)
Deletes the selected file.
Deletes all files.
The menu displayed during playback
If you press the Menu button, the menu of the selected item is displayed on the screen.
Sub Menu
Menu
Play Mode
Description
All musics, Music in Folder, Shuffle all musics, Shuffle music in Folder, Repeat one music
Selects a play mode.
Direct Functions
Menu
MENU
Description
Opens the on-screen menu and exits from the menu.
Plays the next file.
Plays the previous.
Adjusts the volume.
Plays and Pauses a file.
Starts a slideshow.
| Usage Guide | Photo | Music | Clock & Alarm | Settings |
Clock&Alarm
If you press the Menu button, the menu of the selected item is displayed on the screen.
Menu
Sub Menu
Detailed Menu
Description
Month, Day, Year, Hour, Minute, am/pm (When Time Format is set to 12 Hours.)
Date and Time
Month, Day, Year, Hour, Minute (When Time Format is set to 24 Hours.)
Sets the date and time.
12 Hours, 24 Hours
Time Format
For Time Format, you can select 12 Hours or 24 Hours.
If you select 24 Hours, am/pm is not displayed.
Date Format
YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY
You can select the format in which the date is displayed.
Clock Type
Analog, Digital, Clock & Calendar
You can select a clock type.
Activation
Manual, After 10min., After 20min. After 30min.
Set time
1~12(12 Hours)
Hour
Clock & Alarm
Yes, No
0~23(24 Hours)
Minute
00~59
am/pm
am, pm
Repeat
Once, Sat ~Sun, Mon~ Sat, Mon~ Fri, Everyday
Sound
Sound 1, Sound 2, Sound 3
Volume
0~100
You can set an alarm.
| Usage Guide | Photo | Music | Clock & Alarm | Settings |
Settings
Menu
Sub Menu
Detailed Menu
Description
Language
English, Deutsch, Español, Français, Italiano, Nederlands, Polski, Русский,
Português, Svenska, Türkçe, 简体中文, 日本語,한국어
You can select the product language.
Brightness
0~100
Adjusts the brightness of the screen.
Direct Slideshow
Off, On
Connect the external storage, and the slide- show starts with its pictures.
Auto Fit Portrait Photo
Off, On
If Digital photo frame is laid horizontally, the portrait picture automatically turns around to be able to show the
Options
whole picture in Digital photo frame.
Button Sound
Off, Low, Medium, High
You can turn on or off the button operation sound heard when operating the product.
Volume
0~100
Adjusts the volume.
Frame Memory Copy
Original Size, Resized
When copying a photo from an external memory storage device (SD/MMC/MS, USB memory) to the Frame
Memory, if the [Settings]-[Options]-[Frame Memory Copy] is set to the [Resized], the size (screen quality) of
the photo is automatically reduced before saving so that it can be displayed with fit to the screen of your
digital photo frame and the EXIF (camera related information) saved in the photo is removed. Thus, make sure
to use the photos saved in the Frame Memory only with the digital photo frame.
Starting Mode
Home, Last Mode, Slideshow
You can select the first screen to be displayed when power is turned on.
Screen Saver
Slideshow, Clock
You can select the screensaver type.
If no button is operated for ten (10) minutes, the screensaver starts to protect the monitor.
Default, Custom
Home Background
You can set the background of the main menu screen.
Activation, Hour, Minute, am/pm, Repeat
Auto Picture On/Off
Preference
When the time reaches the [Off Time], other operations are stopped and the screen is turned off. When the
time reaches the [On Time], the screen is turned on and the previous operating status persists.
If the screen is turned off as the time has reached the [Off Time], press any button except the Power button to
display the screen again.
If the product is being used as a Mini-Monitor or a Mass Storage device connected to your PC via a
USB cable, the screen will not be turned off even if the time reaches the Off Time.
You can update the product by using a USB memory stick or memory card
Firmware Update
(SD/MMC/MS).
For the latest firmware file, visit www.samsung.com.
Reset Settings
Update/Reset
Yes, No
Initializes the settings to the factory defaults.
However, this does not include the time information and language settings.
Product Information
Model, Firmware Version
You can check the product information.
I want to update firmware.
Preparations
Digital Photo Frame
Firmware update file.
USB memory card or external memory devices(CF/SD/MMC/MS, USB)
Please visit www.samsung.com for the latest firmware update.
Connect USB
memory card
to PC
Connect USB
Memory Card
to Digital
If you are ready, connect the USB memory card to your PC.
Copy the firmware update file you downloaded to the USB memory card.
(Make sure to copy the firmware update file to the root directory.)
Remove the USB memory card from your PC, and connect it to your Digital Photo Frame.
If your Digital Photo Frame is off, turn it on.
Photo Frame
Updating
Select [Firmware Update] on the [Settings]-[Update/Reset] page.
The update progression is displayed on the screen.
When the update finishes, turn your Digital Photo Frame off, remove the USB memory card,
and turn your Digital Photo Frame on again, for maximum safety.
Do not remove the USB memory card during the update operation.
Do not press any key during the update operation.
Do not insert any other card during the update operation.
Do not turn your Digital Photo Frame off during the update operation.
You can identify whether the update operation has finished successfully or not by checking the
firmware version of your Digital Photo Frame is changed to the version of the firmware update.
The Digital Photo Frame not only allows you to appreciate photos but also provides an additional
Mini-Monitor function. The Mini-Monitor is a function for using the Digital Photo Frame as an
auxiliary monitor. Its usage is simple as the Digital Photo Frame connects to your PC via a USB cable.
This function allows you to work more efficiently at your PC by using an additional monitor. To use
your digital photo frame as a Mini-Monitor, first install the Frame Manager program. (However,
please note that you can use only one digital photo frame as a Mini-Monitor.)
Installing Frame Manager guide
Frame Manager User's Manual
Using your digital photo frame as a Mini-Monitor.
Using your digital photo frame as Mass Storage.
Changing the current mode to another mode
Adjusting the brightness
Updating the firmware
System Requirements
z
OS : Windows XP SP2, Vista (32bit)
z
USB : Extended Host Controller (EHCT) for USB 2.0
z
RAM : 256 MB or above
Caution
1.
When using Windows XP, Service Pack 2 must be installed.
It might not operate with any operating systems other than Windows XP SP2. We are not liable for problems that may
occur when installing it on an operating system other than Windows XP SP2.
2.
We recommend a CPU speed of 2.4 GHz or higher.
Your digital photo frame might not operate normally if the performance specifications of your PC are lower than the
recommendations.
3.
Make sure to install it correctly as directed in the Installation Guide.
4.
Do not use your Mini-Monitor as a primary monitor.
We are not liable for any problems that may occur if you do not follow the directions. If it is used as a primary monitor,
the screen may be blank.
5.
Make sure to use the provided USB cable.
6.
When operated as Mini-Monitor, All buttons except "power, ▲/▼" don't operate.
7.
Move the programs displayed and used on the Mini-Monitor to the primary monitor after you have finished using it.
8.
The Mini-Monitor may not operate with some video cards. In this case, set the ‘Hardware acceleration’ value to ‘None’.
To set Hardware acceleration to None: Right-click on the Windows Desktop and select Properties from the displayed
menu. The Display Properties window appears. Click Settings > Advanced > Troubleshoot tab. Move the Hardware
acceleration slide to None.
9.
10.
You cannot use the Aero effect of Windows Vista while using the Mini-Monitor.
When using Windows Vista, some movies cannot be played using the Mini-Monitor.
Specifications
Items
Model Name
Panel
Specifications
SPF-105P
Type
10" (26 cm) TFT
Resolution
1024 x 600
Brightness
300 cd/m2
Contrast Ratio
500 : 1
Interface
Digital 8 bit LVDS
JPEG (Progressive,CMYK JPEG is not supported.)
Supported Formats
MP3
Built-in Memory
1 GB
USB
One upstream (device 2.0) and one downstream (host 1.1)
Memory Card
CF/SD/MMC/MS (FAT32)
Rating
External DC power adapter (12V, 2A, 24W)
battery
7.4V 770mAH
Power
Normal mode : under 10W (But, 14 W for battery charging)
Consumption
Power off mode : under 1W (Even if the power is turned off, up to 10W may be
consumed while the battery is being charged.)
1W x 2 Stereo Speaker (8ohm)
Sound
10mW Stereo Earphone (16ohm)
Dimensions
General
(WxHxD)
Weight
288.8 x 66.2 x 198.5 mm / 11.4 x 2.6 x 7.8 inch
1 Kg / 2.2 lb
The product design may differ according to the model, and specifications are subject to change without prior
notice for product performance enhancement.
Class B Equipment (Information Communication equipment for residential use)
This product complies with the Electromagnetic Compatibility Directives for residential Use and can be
used in all areas including common residential areas. (Class B equipment radiates less electromagnetic
influences than class A equipment.)
| Troubleshooting | Terminology | Service Centers |
Troubleshooting
This section lists various problems and solutions encountered by users while using the digital photo frame. When encountering a problem,
first check the list below and follow the suggested action if one matches your problem. If the problem still persists, contact or visit the
nearest service center.
Symptoms
The power does not turn on.
Causes and Actions
Check the connections for the adapter cable and the power terminal of the
product.
It takes a time until an image is
displayed after the power is turned
on.
It takes a time to transit to the
In case the resolution is high or the file size is large, the photo may be
displayed slowly on the screen.
next photo.
I have connected an external
storage device but it is not
recognized.
Please check the connection between product and external storage.
Connect to PC and check the operation state.
There is a remaining space in the
Frame Memory but I cannot copy
Create a folder in the Fame Memory and copy your photos.
photos.
I inserted a memory card but it
Check the files of your memory card.
does not operate.
Please try a different storage device.
I connected a USB memory but it
does not operate.
A portrait photo is displayed
Check whether [Auto Fit Portrait Photo] of the [Settings-Options] is set to
rotated to landscape.
Activated.
No slideshow is played
automatically.
Set [Starting Mode] of [Settings-Preference] to [Slideshow].
Auto On and Auto Off do not
If the Auto On and Auto Off are set to the same time, they do not operate.
operate.
Check the time settings.
The [Button Sound] is set to On
but no button operation sound is
The button sound is not heard when adjusting the volume or the brightness.
heard.
Check whether the FrameManager program is installed.
The icon of the FrameManager is
Select Start- Programs - Samsung - FrameManager to restart the
not displayed.
FrameManager.
Reboot your computer.
Check whether the button lock function is activated.
I pressed a button, but it does not
If you hold down the MENU button for more than five (5) seconds, the button
operate.
lock function is activated. If you press a button it will not operate.
To clear the button lock function, hold down MENU button for more than five
(5) seconds again.
| Troubleshooting | Terminology | Service Centers |
Terminology
Terms
Description
JPEG is an image compression technology. It provides the smallest loss of all
image compression technologies. It is used widely to transmit multimedia files
JPEG
(Joint Photographic
Coding Expert Group)
on the Internet and for other uses. An image file formatted in the JPEG format
is called a JPEG or JPG file. Usually, a JPEG file is created by taking a picture
with a digital camera, by drawing on a computer, or by a graphic package and
then by compressing the graphics image into the JPEG format.
An SD card is a Flash memory card the size of a postage stamp. It provides
high stability and high capacity. It is widely used in various digital products
SD Card
(Secure Digital Card)
such as PDAs, digital cameras, MP3 players, cell phones, and notebook PCs. Its
appearance is similar to that of MMC, but the number of pins and their
thickness is different. It also has a password setting function for data security.
MMC is external Flash memory used for small mobile devices, as in the case of
MMC
the SD card. Because it has smaller footprints than SD/MMC cards, it has
(Multi Media Card)
become widely accepted as the standard for memory cards. It is usually used
to save movies and photos.
Use the up stream terminal when connecting to a PC. This product supports
USB 2.0. An A-B type cable which is used to connect your digital photo frame
USB Cable
to a PC is provided with the product. The A type is the USB connector used to
1) A-B TYPE
connect to a PC. The B type is the USB connector used to connect to an
external device. You can connect your digital photo frame to a PC using an A-B
type USB cable.
USB Cable
Use this type of cable when using the down stream terminal. This product
2) Cable for
supports USB 2.0. When connecting an external device to the down stream
Connecting Other
terminal, use the USB cable provided with the external device.
Devices
MP3 is an Audio file formatted in a way of MP3 compression
It's high quality Audio compressing technology, it's possible to compress 50
MP3
(MPEG Audio Layer-3)
times as much as CD
MP3, that has an excellent sound quality despite small quanity, has been used
for Internet,FM radio link etc.
| Troubleshooting | Terminology | Service Centers |
Service Centers
If you need a product service, contact or visit a Samsung service center.
For services for network connection and the Server.
Services
Samsung Electronics web site
Contacts
www.samsung.com
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
North America
U.S.A
1-800-SAMSUNG(726-7864)
http://www.samsung.com
CANADA
1-800-SAMSUNG(726-7864)
http://www.samsung.com/ca
MEXICO
01-800-SAMSUNG(726-7864)
http://www.samsung.com
Latin America
ARGENTINE
0800-333-3733
http://www.samsung.com/ar
BRAZIL
0800-124-421, 4004-0000
http://www.samsung.com
CHILE
800-SAMSUNG(726-7864)
http://www.samsung.com/cl
COLOMBIA
01-8000 112 112
http://www.samsung.com/co
COSTA RICA
0-800-507-7267
http://www.samsung.com/latin
ECUADOR
1-800-10-7267
http://www.samsung.com/latin
EL SALVADOR
800-6225
http://www.samsung.com/latin
GUATEMALA
1-800-299-0013
http://www.samsung.com/latin
HONDURAS
800-7919267
JAMAICA
1-800-234-7267
NICARAGUA
00-1800-5077267
PANAMA
800-7267
http://www.samsung.com/latin
PUERTO RICO
1-800-682-3180
http://www.samsung.com/latin
REP. DOMINICA
1-800-751-2676
http://www.samsung.com/latin
TRINIDAD & TOBAGO
1-800-SAMSUNG(726-7864)
http://www.samsung.com/latin
VENEZUELA
0-800-100-5303
http://www.samsung.com/latin
http://www.samsung.com/latin
Europe
AUSTRIA
0800-SAMSUNG(726-7864)
http://www.samsung.com/at
BELGIUM
0032 (0)2 201 24 18
http://www.samsung.com/be
CZECH REPUBLIC
844 000 844
http://www.samsung.com/cz
DENMARK
70 70 19 70
http://www.samsung.com/dk
EIRE
0818 717 100
http://www.samsung.com/ie
FINLAND
030-6227 515
http://www.samsung.com/fi
FRANCE
3260 SAMSUNG
08 25 08 65 65(€ 0,15/Min)
http://www.samsung.com
GERMANY
01805 - SAMSUNG(726-7864) (€ 0,14/Min)
http://www.samsung.com
HUNGARY
06-80-SAMSUNG(726-7864)
http://www.samsung.com
ITALIA
800 SAMSUNG (726-7864)
http://www.samsung.com
LUXEMBURG
0035 (0)2 261 03 710
http://www.samsung.com/be
NETHERLANDS
0900 SAMSUNG(726-7864)
http://www.samsung.com/nl
NORWAY
815-56 480
http://www.samsung.com/no
POLAND
0 801 801 881, 022-607-93-33
http://www.samsung.com/pl
PORTUGAL
80820-SAMSUNG(726-7864)
http://www.samsung.com/pt
SLOVAKIA
0800-SAMSUNG(726-7864)
http://www.samsung.com/sk
SPAIN
902 10 11 30
http://www.samsung.com
SWEDEN
0771-400 200
http://www.samsung.com/se
SWITZERLAND
0800-SAMSUNG(726-7864)
http://www.samsung.com/ch
U.K
0845 SAMSUNG (7267864)
http://www.samsung.com
CIS
ESTONIA
800-7267
http://www.samsung.ee
LATVIA
800-7267
http://www.samsung.com/lv
LITHUANIA
8-800-77777
http://www.samsung.lt
KAZAKHSTAN
8-10-800-500-55-500
http://www.samsung.kz
KYRGYZSTAN
00-800-500-55-500
RUSSIA
8-800-555-55-55
TADJIKISTAN
8-10-800-500-55-500
UKRAINE
8-800-502-0000
http://www.samsung.com
UZBEKISTAN
8-10-800-500-55-500
http://www.samsung.uz
http://www.samsung.ru
Asia Pacific
AUSTRALIA
1300 362 603
http://www.samsung.com
CHINA
800-810-5858, 010- 6475 1880
http://www.samsung.com
HONG KONG
3698-4698
http://www.samsung.com/hk
INDIA
3030 8282, 1800 110011
http://www.samsung.com
INDONESIA
0800-112-8888
http://www.samsung.com
JAPAN
0120-327-527
http://www.samsung.com/jp
MALAYSIA
1800-88-9999
http://www.samsung.com/my
NEW ZEALAND
0800SAMSUNG(726-7864)
http://www.samsung.com/nz
PHILIPPINES
1800-10-SAMSUNG(726-7864)
http://www.samsung.com/ph
SINGAPORE
1800-SAMSUNG(726-7864)
http://www.samsung.com
THAILAND
1800-29-3232, 02-689-3232
http://www.samsung.com
TAIWAN
0800-329-999
http://www.samsung.com/tw
VIETNAM
1 800 588 889
http://www.samsung.com
Middle East & Africa
SOUTH AFRICA
0860-SAMSUNG(726-7864 )
http://www.samsung.com
TURKEY
444 77 11
http://www.samsung.com
U.A.E
800-SAMSUNG(726-7864)
8000-4726
http://www.samsung.com